F3F-Tool - Tool for RC glider slope race (F3F). Can be installed on Jeti transmitters. All Versions in this V1-Repository will support generation 1 hardware (with monochrome display)
Must be improved for F3B-Speed task. Up to now the compensation is linear, maybe some other curve will be more satisfactory, especially above 150 km/h.
f3fTool- directory is referenced in audio configuration. So they must be modified for every new version.
Better would be a placeholder, that is resolved to the current data directory.
The normal gps inaccuracy causes little deviation of the course bearing during course setup. This deviation grows the shorter the distance between the scanned positions is.
In F3F you normally fly not too far away from the slope and therefore from the scanned line, so the shift of the bases will not be too bad.
In F3B you can easily fly 50m or more away from the course line and the shift of the baselines increases with that distance. So a better determination of the exact course bearing is necessary for F3B.
Solution could be a direct input of the exact bearing when it's known or determined via google maps