feliscatus / switchy Goto Github PK
View Code? Open in Web Editor NEWAutomatically exported from code.google.com/p/switchy
Automatically exported from code.google.com/p/switchy
The profile list is automatically sorted while saving, but it is not sorted
as the way I needed.
For example, if I created 4 profiles in order with profile name: HDRC#1,
HDRC#2, HDRC#3 and HDRC#4, the list order could change to HDRC#2, HDRC#4,
HDRC#3 and HDRC#1 when saved.
Original issue reported on code.google.com by [email protected]
on 16 Dec 2009 at 6:34
I'm using my Laptop both at work and at home.
At work I need to use a proxy for access whereas it is a Direct Connection at
home.
I would like to configure Switchy to detect my IP address and select which
proxy to use. I can define the subnet or the gateway IP address for the
selection of the correct proxy. IP changes maybe detected by a windows trap
(if exists or by restarting the browser or clicking the Switchy icon)
Thanks & Regards,
Kaya
Original issue reported on code.google.com by [email protected]
on 5 Jan 2010 at 7:48
What steps will reproduce the problem?
1.The extension was auto updated to 1.3.0 and it changed the extension icon
to show it was updated. I have quick switch turned on and the icon
wouldn't go back to normal until after I toggled quick switch off, clicked
the icon so it would go away and then turned quick switch back on. This is
just a little confusing and may mess some people up who can't fix it.
What is the expected output?
Click it after an update and see the change list and then have it switch to
the normal function after clicking the icon again.
What do you see instead?
Keeps showing the new update version number and the icon won't toggle the
different colors assigned to my given proxies.
Switchy version:1.3.0
Browser version:4.0.285.0 (35334)
Operating system:Windows XP
Error Log (Options page > press 'Show Log' button):
Original issue reported on code.google.com by [email protected]
on 29 Dec 2009 at 3:07
Now the color difference between "on" (a very pale blue) and "off" (gray)
statuses is too subtle. It's hard (for me) to tell whether it's on or not
with a glimpse. Can you change the "on" icon to a brighter color? Such as
green or red. Thank you very much.
Original issue reported on code.google.com by [email protected]
on 8 Jan 2010 at 11:43
many times we knew which URLs should use switchy proxy, but when i tried to
add them, i have to add one wildcard URL Pattern for one rule, it's waste of
time, and too many rules. Hope Switchy can support to add more URLs in ONE
switch rule, separated by , or ; then it would be better.
Original issue reported on code.google.com by [email protected]
on 4 Jan 2010 at 5:08
Can we have the option for bypass proxy server for local addresses?
It was changed and I have to open for check it every time switchy was upgraded.
Your extension was wonderful. Thanks a lot.
Original issue reported on code.google.com by [email protected]
on 11 Jan 2010 at 1:53
Attachments:
Automatically switch on and off according to URL pattern, like FoxyProxy
Original issue reported on code.google.com by Mohammadhi
on 10 Dec 2009 at 2:33
What steps will reproduce the problem?
1.Install Switchy
2.Add a proxy
3.Select proxy
4.Go to proxy checker (e.g., checker.samair.ru)
What is the expected output?
Checker should report proxy's IP
What do you see instead?
Checker reports router's IP
Switchy version:1.2.0
Browser version:4.0.275.0 (Developer Build 34937)
Operating system:Win XP SP3 + latest patches
Error Log (copy it from Options page):
[14:35:45] [info] - Browser Info: 5.0 (Windows; U; Windows NT 5.1; en-US)
AppleWebKit/532.8 (KHTML, like Gecko) Chrome/4.0.275.0 Safari/532.8
[14:35:45] [success] - Plugin loaded successfully..
[14:35:45] [success] - Plugin working properly..
[14:35:45] [success] - 'localStorage' supported..
[14:35:45] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 28 Dec 2009 at 12:44
Since Chrome does not support SOCKS 5, I use Privoxy to turn a SOCKS proxy
into a HTTP proxy.
I'm sure the proxy works, because if I set it directly through Windows
proxy settings, it works finely. However, if I set it through Switchy, it
does not work: the browser acts as if it's not using a proxy.
Switchy version:
1.3.5.1
Browser version:
Chrominum 4.0.288.0
Operating system:
Windows XP
Error Log (Options page > press 'Show Log' button):
[19:34:35] [info] - Extension Info: v1.3.5.1
[19:34:35] [info] - Browser Info: 5.0 (Windows; U; Windows NT 5.1; en-US)
AppleWebKit/532.8 (KHTML, like Gecko) Chrome/4.0.288.0 Safari/532.8
[19:34:35] [success] - Plugin loaded successfully..
[19:34:35] [success] - Plugin working properly..
[19:34:35] [success] - 'localStorage' supported..
[19:34:35] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 8 Jan 2010 at 11:54
the extension doesnt support dial up connections
Original issue reported on code.google.com by [email protected]
on 22 Dec 2009 at 11:20
What do you see instead?
the button became gray
Switchy version:1.4.2.1
Operating system:ubuntu9.04
Error Log (Options > press 'Error Log' button):
[16:51:16] [error] - Plugin Error @ProfileManager.applyProfile(Profile:
{"name":"fuckgfw","proxyMode":"manual","proxyHttp":"192.168.23.204:8000","u
seSameProxy":true,"proxyHttps":"","proxyFtp":"","proxySocks":"","socksVersi
on":4,"proxyExceptions":"<local>; localhost;
127.0.0.1","proxyConfigUrl":"","color":"blue","id":"fuckgfw"}) > TypeError:
Object #<an HTMLEmbedElement> has no method 'setProxy'
[16:51:17] [error] - Plugin Error @ProfileManager.applyProfile(Profile:
{"name":"autoproxy","proxyMode":"auto","proxyHttp":"","useSameProxy":true,"
proxyHttps":"","proxyFtp":"","proxySocks":"","socksVersion":4,"proxyExcepti
ons":"localhost;127.0.0.0/8;*.local","proxyConfigUrl":"http://192.168.23.20
3/test/files/autoproxy.pac","color":"green","id":"autoproxy"}) > TypeError:
Object #<an HTMLEmbedElement> has no method 'setProxy'
[16:55:45] [error] - Plugin Error @ProfileManager.applyProfile(Profile:
{"name":"autoproxy","proxyMode":"auto","proxyHttp":"","useSameProxy":true,"
proxyHttps":"","proxyFtp":"","proxySocks":"","socksVersion":4,"proxyExcepti
ons":"localhost;127.0.0.0/8;*.local","proxyConfigUrl":"http://192.168.23.20
3/test/files/autoproxy.pac","color":"green","id":"autoproxy"}) > TypeError:
Object #<an HTMLEmbedElement> has no method 'setProxy'
[16:56:53] [error] - Plugin Error @ProfileManager.getConnections() >
TypeError: Object #<an HTMLEmbedElement> has no method 'getConnections'
[16:57:26] [error] - Plugin Error @ProfileManager.applyProfile(Profile:
{"name":"autoproxy","proxyMode":"auto","proxyHttp":"","useSameProxy":true,"
proxyHttps":"","proxyFtp":"","proxySocks":"","socksVersion":4,"proxyExcepti
ons":"localhost;127.0.0.0/8;*.local","proxyConfigUrl":"http://192.168.23.20
3/test/files/autoproxy.pac","color":"green","id":"autoproxy"}) > TypeError:
Object #<an HTMLEmbedElement> has no method 'setProxy'
Original issue reported on code.google.com by kofreestyler
on 13 Jan 2010 at 9:00
it would be great to have different proxy settings for different tabs. Hope,
it could be implemented.
Original issue reported on code.google.com by [email protected]
on 31 Dec 2009 at 8:55
What steps will reproduce the problem?
1. Select a proxy
What is the expected output?
no error.
What do you see instead?
Error.
Switchy version: 1.2.0
Browser version: 4.0.249
Operating system: Windows XP
Error Log (copy it from Options page):
[08:36:50] [error] - Plugin Error @ProfileManager.applyProfile(Profile:
{"name":"Itautec","proxyMode":"manual","proxyHttp":"proxy.intranet:80","use
SameProxy":true,"proxyHttps":"","proxyFtp":"","proxySocks":"","proxyExcepti
ons":"<local>","proxyConfigUrl":"","color":"red","id":"Itautec"}) >
TypeError: Object #<an HTMLEmbedElement> has no method 'setProxy'
Original issue reported on code.google.com by [email protected]
on 18 Dec 2009 at 10:39
Add OS X support.
Original issue reported on code.google.com by Mohammadhi
on 6 Dec 2009 at 7:08
What steps will reproduce the problem?
Use the extension, select any profile (or direct connection)
What is the expected output?
The current profile selected and displayed
What do you see instead?
A <Current Profile> profile selected and displayed, even with a Direct
Connection enabled.
Switchy version: 1.1.1
Browser version: 4.0.249.30
Operating system: Microsoft Windows XP Tablet PC Edition 2005 Version 2002
SP3
Error Log (copy it from Options page):
[10:46:25] [info] - Browser Info: 5.0 (Windows; U; Windows NT 5.1; en-US)
AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.30 Safari/532.5
[10:46:25] [success] - Plugin loaded successfully..
[10:46:25] [success] - Plugin working properly..
[10:46:25] [success] - 'localStorage' supported..
[10:46:25] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 15 Dec 2009 at 6:05
Description of the feature request:
Could you implement a system of url pattern with a choice between a white
and black list and with a specific format (Jokers or regexp).
FoxyProxy (on Firefox) has this feature and it's really convenient.
In fact, I need to use a proxy for just 2 or 3 type of URL, but when the
proxy is enable, i can't access to others url.
Thanks in advance!
Original issue reported on code.google.com by [email protected]
on 18 Dec 2009 at 2:47
What steps will reproduce the problem?
1. Enter Switchy Proxy Settings
2. Delete Browser History via chrome://history
3. Restart Browser
What is the expected output?
I would have expected Switchy Proxy settings to still be present.
What do you see instead?
All Switchy Proxy settings have been deleted.
Switchy version: 1.1.0
Browser version: 4.0.239.30
Operating system: Windows Vista x32
Error Log (copy it from Options page):
[11:32:31] [info] - Browser Info: 5.0 (Windows; U; Windows NT 6.0; en-US)
AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.30 Safari/532.5
[11:32:32] [success] - Plugin loaded successfully..
[11:32:32] [success] - Plugin working properly..
[11:32:32] [success] - 'localStorage' supported..
[11:32:32] [success] - Wrote to local storage successfully..
NOTE: This may be the expected result from deleting Browser history, I just
didn't expect deleting history would result in removing my settings! Could
the settings be stored in a bookmark somehow? This would mean the settings
were synced across multiple machines using the sync bookmarks settings...
Original issue reported on code.google.com by [email protected]
on 11 Dec 2009 at 11:39
it is better to assign color with different profile and show it with earth
icon for easy identify which one is using currently.
Original issue reported on code.google.com by [email protected]
on 11 Dec 2009 at 9:50
What steps will reproduce the problem?
1. Create a proxy profile that only has the Auto-Config URL
2. You can't save the profile, so enter something into the "Port" field
3. Save, then Activate the profile
What is the expected output?
Be able to create a profile with Auto-Config URL only.
Be able to have profiles that do not activate the "Proxy Server" check box
in the control panel if selected, but also change the automatic
configuration script URL.
What do you see instead?
You can't leave the "Port" field empty.
"Proxy Server" check box is checked even though the "HTTP Proxy" field is
empty.
Switchy version: 1.0.0
Browser version: 4.0.249.30
Operating system: Windows XP SP3
Error Log (copy it from Options page):
Original issue reported on code.google.com by [email protected]
on 9 Dec 2009 at 2:44
What steps will reproduce the problem?
1. Enable Switchy!
2. Run the Chrome for several days with a lot of proxy switch operation
3. Check the Task manager of Chrome we can see the process of "Extensions:
Switchy!" consume over 40MB memory.
What is the expected output?
It should not consume more than 10 MB memory.
What do you see instead?
For three days of normally running Chrome, Switchy! consumes more than 40MB
memory.
Switchy version: 1.2.0
Browser version: 4.0.249.43
Operating system: XP SP3[Version 5.1.2600]
Error Log (copy it from Options page):
Original issue reported on code.google.com by [email protected]
on 25 Dec 2009 at 3:58
What steps will reproduce the problem?
1. Connect to a site through proxy and mis-configure or take down the
proxy server and hit refresh.
What is the expected output?
2. Site should be unreachable with mis-configured or broken proxy
connection.
What do you see instead?
Site is requested through direct connection.
Switchy version: 1.4.2.1
Operating system: XP
Error Log (Options > press 'Error Log' button):
Original issue reported on code.google.com by [email protected]
on 14 Jan 2010 at 8:04
What steps will reproduce the problem?
1. install switchy! older 0.9.5.2
2. get the update online
3.
What is the expected output?
The notification about the new version is gone after I first click switchy!
icon.
What do you see instead?
An alert about the new version every time I open Chrome.
Switchy version: 0.9.5.2
Browser version: Chrome 4.0.245.0
Operating system: XP
Error Log (copy it from Options page):
14:09:16] [info] - Browser Info: 5.0 (Windows; U; Windows NT 5.1; en-US)
AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.245.0 Safari/532.5
[14:09:16] [success] - Plugin loaded successfully..
[14:09:16] [success] - Plugin working properly..
[14:09:16] [success] - 'localStorage' supported..
[14:09:16] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 10 Dec 2009 at 1:12
What steps will reproduce the problem?
1.Installed switchy.
2.Installed IE Tab extension from
3.Tried to open a new window in IE tab
4. Pressed on the internet explorer options button on the IE toolbar
What is the expected output?
The IE properties window should open.
After that pages that I select should appear in IE tab.
What do you see instead?
The IE tab opens - it take it some time to load - and after a few seconds
the switchy plugin crashes - I attached a print screen.
Switchy version:1.3.5
Browser version:4.0.249.43
Operating system:Win XP Pro
Error Log (Options page > press 'Show Log' button): I can't see a log file
for this.
Original issue reported on code.google.com by [email protected]
on 4 Jan 2010 at 4:02
Attachments:
It might be easier if I describe what I'm requesting by using an IM client
that I used, as an example.
With Digsby (Digsby.com), I can set a Proxy within Digsby, so that no matter
how often my Network Administrator 'reset' my PC's Proxy at the OS level,
Digsby will ALWAYS stay on the Proxy that I configured. (Yes, my company has
this thing in place that the Network will go out and check all PCs to make
sure they're using the correct Proxy. And if not, it will auto-correct it.)
I would really like to see this feature implemented in Switchy.
Thank you very much!
Original issue reported on code.google.com by [email protected]
on 23 Dec 2009 at 3:48
What steps will reproduce the problem?
1.chrome automatic update and reboot chrome
2.All extensions disappeared. reinstall Proxy Switchy.
3.switch rules can't be saved
What is the expected output?
The rules can be saved and rearrange the rules list
What do you see instead?
when I click save button nothing changed
Switchy version: v1.4.1
Operating system: MS WIN7
Error Log (Options > press 'Error Log' button):
[14:59:14] [info] - Extension Info: v1.4.1
[14:59:14] [info] - Browser Info: 5.0 (Windows; U; Windows NT 6.1; en-US)
AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.43 Safari/532.5
[14:59:14] [success] - Plugin loaded successfully..
[14:59:14] [success] - Plugin working properly..
[14:59:14] [success] - 'localStorage' supported..
[14:59:14] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 11 Jan 2010 at 7:07
What steps will reproduce the problem?
1. Create a proxy profile
2. Switch to that profile
What is the expected output?
Navigating under that proxy, something that can be verified via IP check,
or receiving a navigation error if the proxy is down.
What do you see instead?
Switchy! jumps back to Direct Connection mode a few seconds later (the
world turns light blue, and jumps back to grey).
Switchy version: 1.0.0
Browser version: 4.0.249.25 Dev Channel
Operating system: Windows 7 Ultimate x64
Error Log (copy it from Options page):
[03:28:59] [info] - Browser Info: 5.0 (Windows; U; Windows NT 6.1; en-US)
AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.25 Safari/532.5
[03:28:59] [success] - Plugin loaded successfully..
[03:28:59] [success] - Plugin working properly..
[03:28:59] [success] - 'localStorage' supported..
[03:28:59] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 9 Dec 2009 at 6:30
Add Linux support.
Original issue reported on code.google.com by Mohammadhi
on 6 Dec 2009 at 7:07
What steps will reproduce the problem?
1. Create a proxy profile "Sogou1" with 127.0.0.1:8081
2. Switching from direct connection to Sogou1 didn't work
3. Manually switching to Sogou1 from Chrome's Proxy settings does work. And
the Switchy! does show the change. However, using Switchy! to change to
Direction connection again failed.
4. Summary, it seems doesn't work in any condition. I never try other
proxies.
What is the expected output?
Normal behavior.
What do you see instead?
Doesn't work
Switchy version: 0.9.5.2
Browser version: 4.0.249.25
Operating system: Windows 7 X64 Enterprise Edition
Error Log (copy it from Options page):
[10:05:04] [info] - Browser Info: 5.0 (Windows; U; Windows NT 6.1; en-US)
AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.25 Safari/532.5
[10:05:04] [success] - Plugin loaded successfully..
[10:05:04] [success] - Plugin working properly..
[10:05:04] [success] - 'localStorage' supported..
[10:05:04] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 11 Dec 2009 at 2:05
It would be very convenient to enable, disable or choose the proxy based on
patterns, like FoxyProxy does.
Original issue reported on code.google.com by [email protected]
on 10 Dec 2009 at 2:24
i have pc at my office and my home and i've got a laptop and they all have
chrome and switchy. i really love it but everytime i have to add the same
switch rule for three times. could switchy support rules synchronize on
several computers so that my rules could go with me wherever i am using
switchy :)
Original issue reported on code.google.com by [email protected]
on 8 Jan 2010 at 1:20
What steps will reproduce the problem?
When using switchy it switch the proxy for every browser (IE firefox ...)
What is the expected output?
I'd like it to influence only Chrome ideally only the 1 tab
What do you see instead?
Switchy version: : 0.9.5.2
Browser version: latest Dev
Operating system:Windows XP
Error Log (copy it from Options page):
Original issue reported on code.google.com by [email protected]
on 9 Dec 2009 at 6:14
What steps will reproduce the problem?
1. Start Chrome
2. Switch the proxy profile
What is the expected output?
The proxy profile is switched, the "tick" sign moves to the profile I
clicked
What do you see instead?
Nothing happenes; if you restart the browser, the profile is switched to
the one you wanted and the tick is moved, but to switch the profile again,
you have to restart your browser again
Switchy version: 0.9.5.2
Browser version: 4.0.249.25
Operating system: Windows 7 x64
Error Log:
[15:48:17] [info] - Browser Info: 5.0 (Windows; U; Windows NT 6.1; en-US)
AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.25 Safari/532.5
[15:48:17] [success] - Plugin loaded successfully..
[15:48:17] [success] - Plugin working properly..
[15:48:17] [success] - 'localStorage' supported..
[15:48:17] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by KIASoftworks
on 8 Dec 2009 at 12:53
Description of the feature request:
Could you implement importing of proxy lists from a file or from a URL? If
you do not understand what I mean, see SwitchProxy for Firefox (not the
Chrome version because it is completely different). It will update your proxy
list from a file or URL at specified intervals.
I get my proxies from (for reference and an example) is:
http://www.shroomery.org/ythan/proxylist.php
Original issue reported on code.google.com by Mohammadhi
on 6 Dec 2009 at 6:10
What steps will reproduce the problem?
1. Open Options page
2. Click on a field to start edit it.
3. Press <Tab>
What is the expected output? What do you see instead?
The next field should be activated.
Original issue reported on code.google.com by Mohammadhi
on 6 Dec 2009 at 6:23
Could you enable SOCKS v5 support ?
Original issue reported on code.google.com by [email protected]
on 10 Dec 2009 at 2:19
It will be great have these features:
- Export switch rules to a ini file.
- Import rules from a config file.
- Import rules from a internet file via a URL.
Original issue reported on code.google.com by [email protected]
on 14 Jan 2010 at 3:40
What steps will reproduce the problem?
1.set a proxy profile using a .pac file (named pac,for example)
2.set Switchy rules,set the default rule to use the proxy profile pac
3.visit some websites
What is the expected output?
the proxy will be set by the pac file.
What do you see instead?
it don;t use a proxy, just connect directly
Switchy version:1.3.0
Browser version:chromium build 35327
Operating system:Windows 7
Error Log (copy it from Options page):
Original issue reported on code.google.com by [email protected]
on 29 Dec 2009 at 8:10
When Chrome starts and Switchy works, don't come into focus of the window.
So focus of the cursor don't come in OmniBox. Please fix this problem.
Switchy version:1.1.0
Browser version:4.0.249.25
Operating system:Windows XP Pro SP3
Original issue reported on code.google.com by [email protected]
on 11 Dec 2009 at 10:30
What steps will reproduce the problem?
1. Go into the Switchy! option page
2. Select one profile
3. Set the HTTP proxy server but leave others blank, or set other protocols
with different server, etc. Un-check "Use the same proxy server for all
protocols"
4. Click "Save"
What is the expected output?
The "Use the same proxy server for all protocols" should not be checked.
What do you see instead?
The "Use the same proxy server for all protocols" is automatically checked
and all protocols are using the same server as HTTP.
Switchy version: 1.1.1
Browser version: 4.0.266.0
Operating system: Windows 7
Error Log (copy it from Options page):
Original issue reported on code.google.com by [email protected]
on 16 Dec 2009 at 6:23
I am in China. The GFW also bans the DNS request. Thank you.
Original issue reported on code.google.com by Gary.Hai
on 21 Dec 2009 at 5:45
What steps will reproduce the problem?
1. Created 2 proxy profiles.
2. Restarted the browser.
What is the expected output?
Proxy selected properly and used properly for new connections.
What do you see instead?
- Proxy tick in Switchy's proxy list is set properly, however
proxy is not actually being used (Chrome's own proxy setting
was set to 'Direct connection' and thats what the browser tried
to use)
- See the error in the Switchy log
Switchy version: 1.0.0
Browser version: Chrome amd64 4.0.249.30
Operating system: Ubuntu 9.10 amd64
Error Log (copy it from Options page):
[15:52:20] [error] - Plugin Error @ProfileManager.applyProfile(Profile:
{"proxy":"proxy.mycompany.com:8080","useSameProxy":true,"proxyHttps":"","pr
oxyFtp":"","proxySocks":"","name":"Proxy2","bypassProxy":"<local>"}) >
TypeError: Object #<an HTMLEmbedElement> has no method 'notifyIE'
Original issue reported on code.google.com by [email protected]
on 9 Dec 2009 at 10:31
What steps will reproduce the problem?
1.when click the switchy icon
What is the expected output?
There should be a menu pop out so I can modify the option, which is like
the screenshot
https://chrome.google.com/extensions/img/caehdcpeofiiigpdhbabniblemipncjj/1
261099613.48/screenshot/2001
What do you see instead?
No menu. It just change the proxy profile
Switchy version: 1.2.0
Browser version: 4.0.266.0
Operating system: Windows XP
Error Log (copy it from Options page):
No Options page comes out, so I can't find log, or modify some settings.
I think the problem is due to the "Quick Switch mode". I might have enabled
that function, but I can't disable it now.
Original issue reported on code.google.com by [email protected]
on 19 Dec 2009 at 8:53
What steps will reproduce the problem?
1.dialup to internet by my cellphone.
2.click switchy button to switch proxy profile.
3.proxy settings of lan connection is changed correctly. but dialup
connection setings is no change. Chrome still access by direct connection.
What is the expected output?
switchy should change any active connection proxy settings include dialup
settings. (Windows Vista, IE8)
What do you see instead?
Switchy version:
Browser version:
Operating system:
Error Log (copy it from Options page):
Original issue reported on code.google.com by Gary.Hai
on 21 Dec 2009 at 5:42
Localize Switchy to other languages and choose the language automatically
according to currently Chrome user selected language.
Note:
If you're interested in translating Switchy to your language plz let me know
that.
Original issue reported on code.google.com by Mohammadhi
on 12 Jan 2010 at 11:50
Give a detailed description of the feature request.
chrome is a multi-OS
chrome is compliant with Windows, OS-X, Linux
it would be consistant that all extensions are also compliant with all 3 OS
thanks
Original issue reported on code.google.com by [email protected]
on 10 Dec 2009 at 9:52
What steps will reproduce the problem?
1. Add proxy to list
2. Acivate proxy
3.
What is the expected output?
Proxy should work
What do you see instead?
proxy not activated
Switchy version: 1.1.0
Browser version: 4.0.267.0 (Ubuntu build 34059)
Operating system: UBUNTU Jaunty
Error Log (copy it from Options page):
[08:58:31] [info] - Browser Info: 5.0 (X11; U; Linux i686; en-US)
AppleWebKit/532.6 (KHTML, like Gecko) Chrome/4.0.267.0 Safari/532.6
[08:58:31] [success] - Plugin loaded successfully..
[08:58:31] [error] - Plugin not working properly!
[08:58:31] [success] - 'localStorage' supported..
[08:58:31] [success] - Wrote to local storage successfully..
[09:00:24] [info] - Browser Info: 5.0 (X11; U; Linux i686; en-US)
AppleWebKit/532.6 (KHTML, like Gecko) Chrome/4.0.267.0 Safari/532.6
[09:00:24] [success] - Plugin loaded successfully..
[09:00:24] [error] - Plugin not working properly!
[09:00:24] [success] - 'localStorage' supported..
[09:00:24] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 10 Dec 2009 at 9:06
What steps will reproduce the problem?
1.Push the Proxy switchy icon
What is the expected output?
Icon becomes grey
What do you see instead?
Icon remains in blusih colors
Switchy version: 1.3.0
Browser version:4.0.249.43
Operating system:Windows XP
Error Log (Options page > press 'Show Log' button):
Original issue reported on code.google.com by [email protected]
on 29 Dec 2009 at 1:25
If users need to input login and password everytime, it is not convenient
enough as "one click".
Original issue reported on code.google.com by [email protected]
on 17 Dec 2009 at 4:25
What steps will reproduce the problem?
1. My proxy is set up with an automatic script - there is no manual
definition.
2. When defining a topology with only automatic script the manual
configuration is automatically checked
3.
What is the expected output?
After defining only an automatic script in switchy - I expect to see only
the checkbox beside automatic configuration inside the proxy properties
window.
What do you see instead?
The checkbox beside the automatic script is marked but also the checkbox
beside the manual configuration is marked with no proxy address in the
input.
Switchy version:1.3.5
Browser version:4.0.249.43
Operating system:WinXP Pro
Error Log (Options page > press 'Show Log' button):
[13:07:21] [info] - Extension Info: v1.3.5.1
[13:07:21] [info] - Browser Info: 5.0 (Windows; U; Windows NT 5.1; en-US)
AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.0.249.43 Safari/532.5
[13:07:21] [success] - Plugin loaded successfully..
[13:07:21] [success] - Plugin working properly..
[13:07:21] [success] - 'localStorage' supported..
[13:07:21] [success] - Wrote to local storage successfully..
Original issue reported on code.google.com by [email protected]
on 4 Jan 2010 at 11:25
Is it possible to have different proxy for different tab?
Original issue reported on code.google.com by [email protected]
on 10 Dec 2009 at 7:23
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.