DEDSECIMSI is python based tool which use for capturing imsi numbers and sms and also you able to customize your capturing and it's make easy to capture sms and imsi numbers for those who not have much knowledge about gsm packets capturing.
Disclaimer :This program was made to understand how GSM network works. Not for bad hacking ! We are not responsible for any illegal activity !
Install DEDSECIMSI :
git clone https://github.com/0xbitx/dedsecimsi.git
pip3 install pyshark flask flask_socketio sqlite3
Install Gr GSM : ( For receiving GSM transmissions )
sudo add-apt-repository -y ppa:ptrkrysik/gr-gsm
sudo apt update
sudo apt install gr-gsm
If gr-gsm failled to setup. Than follow those this : https://github.com/ptrkrysik/gr-gsm/wiki/Installation
Install Kalibrate : ( For finding frequencies )
apt-get install kalibrate-rtl
OR
sudo apt install build-essential libtool automake autoconf librtlsdr-dev libfftw3-dev
git clone https://github.com/steve-m/kalibrate-rtl
cd kalibrate-rtl
./bootstrap && CXXFLAGS='-W -Wall -O3'
./configure
make
sudo make install
You need gsm frequency on which you capture sms or imsi. By using kalibrate you will get all your near gsm base stations frequencies.
kal -s GSM900
kal: Scanning for GSM-900 base stations.
GSM-900:
chan: 4 (935.8MHz + 320Hz) power: 1829406.95
chan: 11 (937.2MHz + 308Hz) power: 4540354.88
...
Now you need to capture gsm traffic using gr-gsm on frequency of your any gsm base station which you get from kalibrate.
grgsm_livemon -f <your_frequency>M
Example :
grgsm_livemon -f 935.8M
if you see output that's mean you getting gsm packets than continue other setps else change frequency.
```
2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b
...
Now every thing is ready you can start now capturing sms or imsi numbers using dedsec. You able to run imsi catcher and sms sniffer both at same time using 2 seprate terminal for capture imsi numbers and sms both at same time.
cd <your dedsecimsi folder> #Example cd dedsecimsi
python imsi.py
python imsi.py -h
Usage: imsi.py: [options]
Options:
-h, --help show this help message and exit
-i IFACE, --iface=IFACE Interface (default : lo)
-p PORT, --port=PORT Port (default : 4729)
-m IMSI, --imsi=IMSI IMSI to track (default : None, Example: 123456789101112)
-s SAVE, --save=SAVE Save all imsi numbers to sqlite file. (default : None)
For save all imsi numbers with details in sqlite file.(It's will show you output on screen and also save in file)
python imsi.py -s example.db
python imsi.py -m imsi_here (Example: python imsi.py -m 123456789101112)
python sms.py
python sms.py -h
Usage: sms.py: [options]
Options:
-h, --help show this help message and exit
-i IFACE, --iface=IFACE Interface (default : lo)
-p PORT, --port=PORT Port (default : 4729)
-n NUMBER, --number=NUMBER Phone number (default : None)
-s SAVE, --save=SAVE Save all text messages to sqlite file. (default: None)
python sms.py -s example.db
For capture only specific phone number sms. (It's will show you only your given phone number result)
python sms.py -n phone_number_here (Example: python SmsEvil.py -n 09095676722)
linux operating system (kali linux) rtl-sdr (RTL2832U) with antenna
rtl-sdr device available on lazada:
name of product: RTL-SDR Blog RTL SDR V3 R820T2 RTL2832U 1PPM TCXO SMA RTLSDR Software Receiver Defined Radio
Email :[email protected]