eva-3d / easy-mod Goto Github PK

Hi,
I just wanted leave the links for a working mgn12 version somewhere people can find them.

This XY joiner version allow for usage of mgn12 on the X axis, all you need if you just want to reduce the axis weight ( https://cad.onshape.com/documents/8559b0e7f5d3b30427c227c5/w/d70f098c5b327e06a1ae23f4/e/12a2436a47701eb37945bb45?configuration=List_ByYG67Ay22XcMs%3DMGN12 )
If you also have mgn12 C or H in the Y axis you need this adapters, as a replacement for the original RR metal parts ( https://cad.onshape.com/documents/8559b0e7f5d3b30427c227c5/w/d70f098c5b327e06a1ae23f4/e/67166bbf807ca01f4a1ac8b3?configuration=List_V5TmcWwH5u18OA%3DDefault )

This should be related to the old issue #3.

I tried forking the repo and making a pull request but I was unable to work the page generation script, @pkucmus if you teach me how to I can do that if you want.

Once again thank you for the awesome job.

Hi,
could you make alternative version od left/right idlers for MGN12 rails? In EVA project doc you have good point about using MGN12 rails, but Easy-mod is designed for MGN15 rails only.

readme.md links to version 1.1.0
should be 1.2.1 https://cad.onshape.com/documents/d1cf51356ca66e6a45738c30/v/f17725bc7d9da347304bc9e4/e/61f36bd0b771bfe27606c238

Is actual Easy-Mod valid on current model of Rat Rig V-core Pro printer?
I built latest Rat Rig V-Core Pro and I would like adapt EVA platform, but XY joiners from Easy-Mod are fitted to rail under frame (current V-Core Pro has rails (+XY motors) on frame) nad also you need shorter Z rail.
Do you plan to adjust Easy-mod to current mount of X rail to Y rail (mount on top of XY joiner)?

When upgrading the V-Core 2.0 to the Easy Mod with Pro upgrade kit, I needed to make both the stepper motors run in reverse to get it to work properly. You may also have to swap the cables between the X/Y motors, as I may have accidentally swapped them when reconnected the wires.
After reconnecting everything, before making changes, X was working in reverse/mirror and the printer was working as if X Max was actually X Home. Y was homing properly...
I don't consider this to be an issue. Just something to be aware of if someone runs into the same problem.