This project uses sourcefiles provided by ST-Micro (found here: https://www.st.com/en/embedded-software/i-cube-lrwan.html) The compiled binary are ought to be used with a STM32L0 LoRa and Sigfox Discovery kit.
The project is used to perform several tests using LoRa to analyze how digital watermarks can be packed into the inter-packet delay of node which is periodically sending telemetry data.
Be sure to have the stm32-cross-build container provided here: https://github.com/erebks/stm32-cross-build
To compile and build use bash build.sh.
To flash use bash flash.sh. I saw that it might be necessary to hold the RESET button placed on the discovery board for it to work.
For completeness here is a shortend version of the readme that ST provides:
- LoRaWAN_AT_Slave/Core/Inc/adc.h This file contains all the function prototypes for
the adc.c file
- LoRaWAN_AT_Slave/Core/Inc/adc_if.h Header for ADC interface configuration
- LoRaWAN_AT_Slave/Core/Inc/dma.h This file contains all the function prototypes for
the dma.c file
- LoRaWAN_AT_Slave/Core/Inc/main.h Header for main.c file.
This file contains the common defines of the application.
- LoRaWAN_AT_Slave/Core/Inc/platform.h Header for General HW instances configuration
- LoRaWAN_AT_Slave/Core/Inc/rtc.h This file contains all the function prototypes for
the rtc.c file
- LoRaWAN_AT_Slave/Core/Inc/rtc_if.h configuration of the rtc_if.c instances
- LoRaWAN_AT_Slave/Core/Inc/stm32l0xx_hal_conf.h HAL configuration file.
- LoRaWAN_AT_Slave/Core/Inc/stm32l0xx_it.h This file contains the headers of the interrupt handlers.
- LoRaWAN_AT_Slave/Core/Inc/stm32_lpm_if.h Header for Low Power Manager interface configuration
- LoRaWAN_AT_Slave/Core/Inc/sys_app.h Function prototypes for sys_app.c file
- LoRaWAN_AT_Slave/Core/Inc/sys_conf.h Applicative configuration, e.g. : debug, trace, low power, sensors
- LoRaWAN_AT_Slave/Core/Inc/sys_debug.h Configuration of the debug.c instances
- LoRaWAN_AT_Slave/Core/Inc/usart.h This file contains all the function prototypes for
the usart.c file
- LoRaWAN_AT_Slave/Core/Inc/usart_if.h Header for USART interface configuration
- LoRaWAN_AT_Slave/Core/Inc/utilities_conf.h Header for configuration file to utilities
- LoRaWAN_AT_Slave/Core/Inc/utilities_def.h Definitions for modules requiring utilities
- LoRaWAN_AT_Slave/LoRaWAN/App/app_lorawan.h Header of application of the LRWAN Middleware
- LoRaWAN_AT_Slave/LoRaWAN/App/Commissioning.h End-device commissioning parameters
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_app.h Header of application of the LRWAN Middleware
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_app_version.h Definition the version of the application
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_at.h Header for driver at.c module
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_command.h Header for driver command.c module
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_info.h To give info to the application about LoRaWAN configuration
- LoRaWAN_AT_Slave/LoRaWAN/App/se-identity.h Secure Element identity and keys
- LoRaWAN_AT_Slave/LoRaWAN/App/test_rf.h Header for test_rf.c
- LoRaWAN_AT_Slave/LoRaWAN/Target/b_l072z_lrwan1_bus.h header file for the BSP BUS IO driver
- LoRaWAN_AT_Slave/LoRaWAN/Target/b_l072z_lrwan1_errno.h Error Code
- LoRaWAN_AT_Slave/LoRaWAN/Target/cmwx1zzabz_0xx_conf.h This file provides code for the configuration
of the shield instances (pin mapping).
- LoRaWAN_AT_Slave/LoRaWAN/Target/lorawan_conf.h Header for LoRaWAN middleware instances
- LoRaWAN_AT_Slave/LoRaWAN/Target/mw_log_conf.h Configure (enable/disable) traces
- LoRaWAN_AT_Slave/LoRaWAN/Target/radio_board_if.h Header for Radio interface configuration
- LoRaWAN_AT_Slave/LoRaWAN/Target/radio_conf.h Header of Radio configuration
- LoRaWAN_AT_Slave/LoRaWAN/Target/systime.h Map middleware systime
- LoRaWAN_AT_Slave/LoRaWAN/Target/timer.h Wrapper to timer server
- LoRaWAN_AT_Slave/Core/Src/adc.c This file provides code for the configuration
of the ADC instances.
- LoRaWAN_AT_Slave/Core/Src/adc_if.c Read status related to the chip (battery level, VREF, chip temperature)
- LoRaWAN_AT_Slave/Core/Src/dma.c This file provides code for the configuration
of all the requested memory to memory DMA transfers.
- LoRaWAN_AT_Slave/Core/Src/main.c Main program body
- LoRaWAN_AT_Slave/Core/Src/rtc.c This file provides code for the configuration
of the RTC instances.
- LoRaWAN_AT_Slave/Core/Src/rtc_if.c Configure RTC Alarm, Tick and Calendar manager
- LoRaWAN_AT_Slave/Core/Src/stm32l0xx_hal_msp.c This file provides code for the MSP Initialization
and de-Initialization codes.
- LoRaWAN_AT_Slave/Core/Src/stm32l0xx_it.c Interrupt Service Routines.
- LoRaWAN_AT_Slave/Core/Src/stm32_lpm_if.c Low layer function to enter/exit low power modes (stop, sleep)
- LoRaWAN_AT_Slave/Core/Src/system_stm32l0xx.c CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File.
- LoRaWAN_AT_Slave/Core/Src/sys_app.c Initializes HW and SW system entities (not related to the radio)
- LoRaWAN_AT_Slave/Core/Src/sys_debug.c Enables 4 debug pins for internal signals RealTime debugging
- LoRaWAN_AT_Slave/Core/Src/usart.c This file provides code for the configuration
of the USART instances.
- LoRaWAN_AT_Slave/Core/Src/usart_if.c Configuration of UART MX driver interface for hyperterminal communication
- LoRaWAN_AT_Slave/LoRaWAN/App/app_lorawan.c Application of the LRWAN Middleware
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_app.c Application of the LRWAN Middleware
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_at.c AT command API
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_command.c Main command driver dedicated to command AT
- LoRaWAN_AT_Slave/LoRaWAN/App/lora_info.c To give info to the application about LoRaWAN configuration
- LoRaWAN_AT_Slave/LoRaWAN/App/test_rf.c manages tx tests
- LoRaWAN_AT_Slave/LoRaWAN/Target/b_l072z_lrwan1_bus.c source file for the BSP BUS IO driver
@par Hardware and Software environment
- This example runs on the B-L072Z-LRWAN1 Discovery board embedding the
CMWX1ZZABZ-091 LoRa module, and has been tested with STMicroelectronics
B-L072Z-LRWAN1 RevC board.
- B-L072Z-LRWAN1 Discovery board Set-up
- Connect the Nucleo board to your PC with a USB cable type A to micro-B
to ST-LINK connector (CN7).
- Please ensure that the ST-LINK connector CN8 jumpers are fitted.
- Configure the software via the configuration files:
- sys_conf.h, radio_conf.h, lorawan_conf.h, lora_app.h, se-identity.h, mw_log_conf.h, radio_board_if.h, main.h, etc
- Careful:
- the region and class chosen on LoRaWAN/App/lora_app.h shall be compatible with LoRaWAN/Target/lorawan_conf.h list
-Set Up:
-------------------------- V V --------------------------
| LoRa Object | | | | LoRa Network |
| | | | | |
ComPort<--| |--| |--| |-->Web Server
| | | |
-------------------------- --------------------------
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
- Open a Terminal, connected the LoRa Object
- UART Config = 9600, 8b, 1 stopbit, no parity, no flow control
- Terminal Config: Select 'CR+LF' for Transmit New-Line and switch 'Local echo' on
- Reset the board
- type AT? to get all available commands
- Send your AT commands by typing them in the terminal
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent