Park or neutral position of servos changes when Ail. D/R swith is flipped about er9x HOT 9 CLOSED

I'm not sure why this is happening to you, I can't immediately reproduce it.
Please, if you can, go to http://openrcforums.com/forum/ and post the .eepe of 
your setup so I can try it.

i really appreciate your quick response, not trying to be a pain but im not 
sure what you want? i am new to this radio and programming. if you have a link 
to instrucions of what you want, or tell me how to get what you want, i will be 
more than happy to post it.
sorry for the inconvenience.
thanks 
Troy

it may just be a bad software load, if you think it might help i could just try 
to reload the software, of if you have a link to a better one you think i 
should try?
i am just flying planes if that helps with picking a particular software.

If you are new to er9x, then definitely register on openrcforums. You will get 
plenty of help there, and it is a better place than on here.

What you need is to install eepe on your computer, if you haven't already done 
so. This will enable you to read the model memory (EEPROM) from your 
transmitter and post it on the forum.

Ok I just posted on openrcforums.com. I guess the posts have to be approved 
before they go public. not sure how long that takes. I hope I uploaded what you 
wanted.
I titled it "servo park or neutral position issue"
also I think you can just search for my posts my name on there is raqumup
thanks for your help 

Here is the link to my post
http://openrcforums.com/forum/viewtopic.php?f=5&t=5938

I think i get at least part of what you are saying. it sounds like they way i 
have it setup is it has dual rates for the trim essentially. example (not exact 
numbers) if i have moved the trim 3 clicks down, and then i flip the switch to 
dual rates then the trim moves 5-6 clicks down, and this is where i am having 
the problem correct? i followed a youtube video on mixing and setting up dual 
rates. tonight i will play with what you were telling me to try.
Thanks for the advise.
on a side note, would you rec. a different version of ER9X? or should i just 
stick with the one i have loaded?

set it up like you said, was able to figure it out. park or neutral servo 
position stays the same now. I really appreciate all your help.
thanks
I did this for future people that read this so they know it worked. maybe one 
day someone else will have the same problem and find this.