NOTE - This software was previously licensed under GPLv3 and has since been updated to BSD.
ipv666
is a set of tools that enables the discovery of IPv6 addresses both in the global IPv6 address space and in more narrow IPv6 network ranges. These tools are designed to work out of the box with minimal knowledge of their workings.
As of v0.4
we have provided functionality into the tool set wherein you can choose to share any addresses you discover with us. All results uploaded by all parties can be queried on our website. The web site is bare bones right now but we have lots of plans for improvements!
The tools included in this codebase are as follows:
scan discover
- Locates live hosts over IPv6 using statistical modeling and ICMP ping scansscan alias
- Tests a single IPv6 network range to see if the network range is aliasedgenerate addresses
- Generate IPv6 addresses based on the content of a probabilistic clustering modelgenerate model
- Generate a probabilistic clustering model based off an input set of IPv6 addressesgenerate blacklist
- Adds the contents of a file containing IPv6 network ranges to the aliased network blacklistclean
- Cleans the contents of a file containing IPv6 addresses based on an aliased network blacklistconvert
- Converts the contents of a file containing IPv6 addresses to another IP address representation
Unless you're doing more complicated IPv6 research it is likely that the scan discover
tool is what you're looking for.
To get started check out the Installation section first and then head to whichever section details the tool you're looking to use.
This software is brought to you free of charge by @_lavalamp and @marcnewlin, and we hope that you find it useful. If you do find it useful and you'd like to support our continued contributions to the codebase, please consider donating via any of the following:
- PayPal - paypal.me/thelavalamp
- BTC - 371FzLrE7dzd3cZNjDytSyV5hDhDpLj1Mr
- ETH - 0x2A35C6987a7E2515EEdB8fB43a7FA86a9Ea917f4
- LTC - MGkiBazpfs17ek7DuVJKwzwcFjVcmwrXur
As of v0.2
ipv666
should be much easier to install!
First you'll need to have the Golang environment installed. As ipv666
makes use of Go modules we recommend using Golang v1.11
and above to ensure a working installation.
Once you have Golang v1.11
or above installed, do the following:
go get github.com/ekaley/ipv666/ipv666
Once this command completes you should have the ipv666
binary on your path. If you don't, double check to make sure that $GOPATH/bin
is in your PATH
.
NOTE - This software is only intended to be run on Linux-based operating systems. Support for other operating systems is not presently planned.
NOTE - As of v0.4
we have built in the ability for users of ipv666
to upload the addresses they discover to our central service. You will be prompted on first use as to whether or not you would like to provide data to us. The addresses that are uploaded in this manner are made queryable on our IPv666 web site. If you choose not to upload your discovered addresses, no worries! We will ask for your approval again once every seven days, just in case you change your mind.
The scan discover
tool is the main workhorse of this toolset. It uses some fairly complicated statistical modeling, analysis, and blacklisting to predict legitimate IPv6 addresses and scan for their presence. More details on how exactly this tool works can be found in this blog post.
Please note that any networks that you scan with this tool will receive a considerable amount of traffic for a significant variety of IPv6 addresses. In some cases the networking infrastructure that is carrying your traffic will be unhappy and may either fall over and/or block you. We recommend exercising caution when using this tool (especially for targeted network scans) and choosing a bandwidth
value with care (default is currently 20 Mbps).
This utility scans for live hosts over IPv6 based on the network range you specify. If no range is
specified, then this utility scans the global IPv6 address space (e.g. 2000::/4). The scanning process
generates candidate addresses, scans for them, tests the network ranges where live addresses are found
for aliased conditions, and adds legitimate discovered IPv6 addresses to an output list.
Usage:
ipv666 scan discover [flags]
Flags:
-h, --help help for discover
-o, --output string The path to the file where discovered addresses should be written.
-t, --output-type string The type of output to write to the output file (txt or bin).
Global Flags:
-b, --bandwidth string The maximum bandwidth to use for ping scanning
-f, --force Whether or not to force accept all prompts (useful for daemonized scanning).
-l, --log string The log level to emit logs at (one of debug, info, success, warn, error).
-n, --network string The IPv6 CIDR range to scan.
Scan the global address space for live hosts over IPv6 with a maximum speed of 20 Mbps and write the results to a file entitled discovered_addrs.txt
:
ipv666 scan discover
Scan the network 2600:6000::/32
for live hosts over IPv6 with a maximum speed of 10 Mbps and write the results to a file entitled addresses.txt
:
ipv666 scan discover -b 10M -o addresses.txt -n 2600:6000::/32
The scan alias
tool will test a target network to see if it exhibits traits of being an aliased network (ie: all addresses in the range respond to ICMP pings). If the target network is aliased it will perform a binary search to find the exact network length for how large the aliased network is.
A utility for testing whether or not a network range exhibits traits of an aliased network range.
Aliased network ranges are ranges in which every host responds to a ping request, thereby making it
look like the range is full of IPv6 hosts. Pointing this utility at a network range will let tell you
whether or not that network range is aliased and, if it is, the boundary of the network range that is
aliased.
Usage:
ipv666 scan alias [flags]
Flags:
-h, --help help for alias
Global Flags:
-b, --bandwidth string The maximum bandwidth to use for ping scanning
-f, --force Whether or not to force accept all prompts (useful for daemonized scanning).
-l, --log string The log level to emit logs at (one of debug, info, success, warn, error).
-n, --network string The IPv6 CIDR range to scan.
Test the network range 2600:9000:2173:6d50:5dca:2d48::/96
to see if it's aliased with a maximum speed of 20 Mbps:
ipv666 scan alias -n 2600:9000:2173:6d50:5dca:2d48::/96
Test the network range 2600:9000:2173:6d50:5dca:2d48::/96
to see ifit's aliased with maximum speed of 10 Mbps and show debug logging:
ipv666 scan alias -n 2600:9000:2173:6d50:5dca:2d48::/96 -b 10M -l debug
The generate addresses
tool uses a predictive clustering model to generate a set number of IPv6 addresses. The addresses are subsequently written to a specified file.
This utility will generate IPv6 addresses in target network range (or in the global address
space) based on the default included cluster model or a cluster model that you specify.
Usage:
ipv666 generate addresses [flags]
Flags:
-c, --count int The number of IP addresses to generate. (default 1000000)
-h, --help help for addresses
-m, --model string Local file path to the model to generate addresses from (if empty,
uses the default model packaged with ipv666).
-n, --network string The address range to generate addresses within (if empty, generates
addresses in the global address space of ::/0).
-o, --out string File path to where the generated IP addresses should be written.
Global Flags:
-f, --force Whether or not to force accept all prompts (useful for daemonized scanning).
-l, --log string The log level to emit logs at (one of debug, info, success, warn, error).
Generate 1,000,000 addresses in the global address space based on the default clustering model packaged with ipv666
and write the results to a file at /tmp/output
:
ipv666 generate addresses -o /tmp/output
Generate 500,000 addresses in the network 2600::/4
based on the model contained in the file at /tmp/model
and write the results to a file at /tmp/output
:
ipv666 generate addresses -c 500000 -n 2600::/4 -m /tmp/model -o /tmp/output
The generate model
tool creates a new predictive clustering model based on a list of known IPv6 addresses.
This utility will generate a predictive clustering model based on the contents of
an IPv6 address file.
Usage:
ipv666 generate model [flags]
Flags:
-h, --help help for model
-i, --input string An input file containing IPv6 addresses to use for the model.
-o, --out string The file path to write the resulting model to.
Global Flags:
-f, --force Whether or not to force accept all prompts (useful for daemonized scanning).
-l, --log string The log level to emit logs at (one of debug, info, success, warn, error).
Generate a new clustering model based on the IP addresses in the file /tmp/addresses
and write the resulting model to the file /tmp/model
:
ipv666 generate model -i /tmp/addresses -o /tmp/model
The generate blacklist
tool processes the content of a file containing IPv6 CIDR ranges (new-line delimited) and adds all of the network ranges to either (1) a new blacklist or (2) your existing blacklist. These blacklists are automatically located and loaded from specific file paths during the operation of discover
, alias
, and clean
.
You will be prompted after invocation asking whether you'd like to create a new blacklist or add these new networks to your existing blacklist.
This utility takes a list of IPv6 CIDR ranges from a text file (new-line delimited),
adds them to the current network blacklist, and sets the new blacklist as the one to use
for the 'scan' command.
Usage:
ipv666 generate blacklist [flags]
Flags:
-h, --help help for blacklist
-i, --input string An input file containing IPv6 network ranges to build a blacklist from.
Global Flags:
-f, --force Whether or not to force accept all prompts (useful for daemonized scanning).
-l, --log string The log level to emit logs at (one of debug, info, success, warn, error).
Add the IPv6 CIDR ranges found in the file /tmp/addrranges
to a blacklist:
ipv666 generate blacklist -i /tmp/addrranges
Add the IPv6 CIDR ranges found in the file /tmp/addrranges
to a blacklist and force accept all prompts:
ipv666 generate blacklist -i /tmp/addrranges -f
The clean
tool processes the content of a file containing IPv6 addresses (new-line delimited), removes all the addresses that are found within blacklisted networks, and writes the results to an output file. This tool is an easy way to remove addresses in aliased network ranges from a set of IP addresses.
This utility will clean the contents of an IPv6 address file (new-line delimited, standard ASCII hex
representation) based on the contents of an IPv6 network blacklist file. If no blacklist path is
supplied then the utility will use the default blacklist. The cleaned results will then be written to
an output file.
Usage:
ipv666 clean [flags]
Flags:
-b, --blacklist string The local file path to the blacklist to use. If not specified, defaults to
the most recent blacklist in the configured blacklist directory.
-h, --help help for clean
-i, --input string An input file containing IPv6 addresses to clean via a blacklist.
-o, --out string The file path where the cleaned results should be written to.
Global Flags:
-f, --force Whether or not to force accept all prompts (useful for daemonized scanning).
-l, --log string The log level to emit logs at (one of debug, info, success, warn, error).
Process the IPv6 addresses in the file /tmp/addresses
, remove all addresses found in the most up-to-date blacklist found in the default file path, and write the results to /tmp/cleanedaddrs
):
ipv666 clean -i /tmp/addresses -o /tmp/cleanedaddrs
Process the IPv6 addresses in the file /tmp/addresses
, remove all addresses found in the blacklist at /tmp/blacklist
, and write the results to /tmp/cleanedaddrs
):
ipv666 clean -i /tmp/addresses -o /tmp/cleanedaddrs -b /tmp/blacklist
The convert
tool is useful for converting a file containing IPv6 addresses to different file formats. It currently supports the three different output types of txt
(standard ASCII hex IPv6 addresses), bin
(the raw 16 bytes of all input addresses are written sequentially to a file) and hex
(the full 32 character ASCII hex representation is written to a file delimited by new lines).
This utility will process the contents of a file as containing IPv6 addresses, convert those addresses
to another format, and then write a new file with the same addresses in the new format. This
functionality is (hopefully) intelligent enough to determine how the addresses are stored in the file
without having to specify an input type.
Usage:
ipv666 convert [flags]
Flags:
-h, --help help for convert
-i, --input string The file to process IPv6 addresses out of.
-o, --out string The file path to write the converted file to.
-t, --type string The format to write the IPv6 addresses in (one of 'txt', 'bin', 'hex').
Global Flags:
-f, --force Whether or not to force accept all prompts (useful for daemonized scanning).
-l, --log string The log level to emit logs at (one of debug, info, success, warn, error).
Convert the contents of the file at /tmp/addresses
(in standard text format) to binary format and write the results to /tmp/out
:
ipv666 convert -i /tmp/addresses -o /tmp/out -t bin
Convert the contents of the file at /tmp/addresses
(in binary format) to fat hex format and write the results to /tmp/out
:
ipv666 convert -i /tmp/addresses -o /tmp/out -t hex
We've given a few talks on ipv666
and a few folks have had kind words to say about it. Here's a running list:
- The Daily Swig - IPv6 Scanning Tool Opens Up New Cybersphere for Researchers
- Decipher - Mapping the Spectral Landscape of IPv6 Networks
- IPv666 - Address of the Beast Blog Post
- IPv666 - Address of the Beast @ ShmooCon 2019
- IPv666 - Address of the Beast @ Hack in the Box Dubai 2018
- IPv666 - Address of the Beast @ Troopers 2019
- IPv666 Web Portal
This software is licensed via the GNU General Public License v3.0.
We invite people to contribute to the codebase, fork it, do whatever you'd like! The only requirement that we have with this license is that derivative work is similarly open sourced.
Many thanks to the following people for their contributions, inspiration, and help.
- Vasyl Pihur
- Zakir Durumeric
- David Adrian
- Eric Wustrow
- J. Alex Halderman
- Paul Pearce
- Ariana Mirian
- HD Moore
- Oliver Gasser
- Quirin Scheitle
- Tobias Fiebig
- Matthew Bryant