edgardurao / domotichome Goto Github PK

--------------------------------------------------------------------
This software is distributed under creative commons license
http://creativecommons.org/licenses/by-nc-nd/2.0/it/deed.en_US
Author: Mattia Lipreri - [email protected]
--------------------------------------------------------------------

I created this project and my target is improve the comfort of my home. 

Taking a look around I noticed that home automation solution proposed by 

the big market player are too much expensive for me and, above all, I 

should create new wires connections between light, plug, etc.. and the 

control box.
My idea is use what we already have without spend lot of money to buy a 

owner solution, so I started with arduino, my android mobile phone, some 

relays and my home.
I have a nice home, 2 bad rooms, kitchen with living room and it was very 

nice tka e the control of the lights, gate and door with my mobile phone.

Let's start to play.
I used an Arduino 2009 with ethernet shield and the game is very easy, I 

send some http message to arduino, he moves some relays and give me back 

a JSON response. Not so hard, but the hard business is interfacing with 

the electrical wiring of home, with some patience I found what I need and 

I linked those wires at the relays.

Go deeper.
Let's analyze a bit what my mobile send to arduino, the actors in this 

scenario are:

AS = Arduino Station (arduino 2009/Mega + ethernet shield with relays 

linked to arduin digital out)

M = Master (android app) 


Sync Mobile - Arduino

You have to configure the ip of your arduino on the app, in this way when 

you perform a sync the mobile will send to arduino this:

http://arduinoip/?m=hello

and arduini will reply with this json message:

{"ip" : "arduinoip", "devices" : [" +  "{ "type" : "gate", "name" : 

"cancellino ingresso", "out" : "5"}, {"type" : "door", "name" : "porta 

ingresso", "out" : "4"}, {"type" : "light", "name" : "luce soggiorno", 

"out" : "6"}, {"type" : "light", "name" : "luce cucina", "out" : "7"}, 

{"type" : "temperature", "name" : "camera da letto", "out" : "0"}, 

{"type" : "temperature", "name" : "camera bimbi", "out" : "9"}, {"type" : 

"wattmeter", "name" : "consumo energetico casa", "out" : "10"}]}

so we know what sensor/realys are linked to arduino and what they are 

used for.

Take a closer look at this message:

ip is the arduino ip
out is the arduino pin where the relay/sensor is linked
name a human identifier
type object type

Right now there are the following type available:

plug 
light 
door
gate 
temperature
humidity
wattmeter

The type temperature, humidity, wattmeter can't be controlled because 

they are sensons, the app has a background job that retrieve this value 

and store into a database, in the future we could make graph or use this 

data for statistical consideration.

Now the app is in sync with arduino!

Put something on/off

We just have to call to turn something on:

http://arduinoip/?out=1&status=1

status can be 1(on) or 0(off)
out point at the arduino pin

our arduino will give back this JSON massage if the transaction succeed:

{"out": "4", "status" , "1"}

What can we do with the andriod app:
- sync the app with arduino
- turn something on/off
- create custom action (turn light on and then open the gate)

Items used:

1 Arduino 2009
1 Ethernet shield
1 Relay with driver
1 power pack
1 electrical stuff
1 Pannello di plexiglas
Total in euro: 70

What I control:
- living light
- home gate
- front door
- check living room temperature 

What I like to do in the future:
- integrate my irrigation system
- trigger an action at a specified time (need to work on android app)
- link another arduino and handle it with the app
- when the software will work fine give the code at the community

Sorry for my english, I'm not a native speaker.
--------------------------------------------------------------------
This software is distributed under creative commons license
http://creativecommons.org/licenses/by-nc-nd/2.0/it/deed.en_US
Author: Mattia Lipreri - [email protected]
--------------------------------------------------------------------