Giter Club home page Giter Club logo

v2ray_ws-tls_website_onekey's Introduction

严重声明:

此项目仅限于技术交流和探讨,在您测试完毕后必须在1秒钟内彻底删除项目副本。

此项目为bash一键脚本,其中涉及到的任何软件版权和责任归原作者所有。

友情提示:

在**境内使用、传播、售卖、免费分享等任何翻墙服务,都是违法的。

如果你在**境内使用、测试此项目脚本,或者使用此脚本搭建服务器发生以上违法行为,都有违作者意愿!

你必须立刻停止此行为!并删除脚本!

V2RAY 基于 NGINX 的 VMESS+WS+TLS+Website(Use Host)

HTTP Header 分流 随机生成 Header,自带 Website 伪装站点 http 强制跳转 https,支持ssl非443端口,自带Rinetd BBR加速 支持OpenVZ,自动生成客户端config.json配置文件 web在线下载,重装自动清除残余的Http服务,每天自动升级最新的V2ray内核,支持 cdn 嵌套,自动续签ssl证书,自动生成Windows客户端和便捷启动脚本 一键添加开机自启动服务 一键开启系统ie代理。

使用:1.解析好域名; 2.运行一键安装脚本;

wget -N --no-check-certificate git.io/v.sh && chmod +x v.sh && bash v.sh

[新手请使用 Debian8 纯净系统安装]

备用1:一键更换新的 UUID,同时升级 Windows 客户端 (new)

bash v.sh -n

备用2:一键删除服务器中储存的客户端 config.json 配置文件,防止 Website 被抓取 (rm)

bash v.sh -r

共享你的 V2ray 账号 (share)

bash v.sh -s

开启共享模式后,每周一自动更换 UUID 并推送至 Website 伪装站点首页。
为防止被恶意抓取,该模式下不提供客户端 config.json 文件下载。

赞助 V2ray 项目(xmr)

bash v.sh -x

注意:开启赞助功能后,会在 website 首页植入 xmr 挖矿脚本。
      任何电脑只要浏览器访问 website 点击允许,即可开始挖矿赞助 v2ray 项目,关闭网页停止挖矿。
声明:脚本不会在你的 vps 内植入任何挖矿脚本,不会利用你的 vps 进行挖矿,同时也不建议你自己使用 vps 挖矿(得不偿失)。

注册免费域名

http://www.freenom.com
需更换ns服务器,默认ns服务器在国内很不稳定。

嵌套 cloudflare (fullSSL+CDN) 节省资源 人人有责 如果你的ip没有墙 请勿开启

# 提前准备
购买域名、VPS;
注册cloudflare,提前24小时配置NS并解析域名。
确保所解析的域名Status位置关闭默认的cdn加速,变为灰色云朵状态。

# 开启 cloudflare (fullssl+cdn)
安装完毕一键脚本,并测试V2ray可以正常使用之后。
注意:在此步骤之前,勿必保持所解析的域名Status处为灰色云朵(及关闭cdn)。重做系统或重新安装时也勿必关闭此处设置。

1.开启全程ssl加密
在 Cloudflare 的 Crypto 那里设置 SSL 为 Full

2.开启cdn隐藏ip地址
返回 Status 点击灰色云朵图标 将其变成 橙色云朵状态 开启cdn,即是 DNS and HTTP proxy(CDN)

其它配置项尽量保持默认,这样有助于你排错。

提示:重装系统(Debian 8)能解决 100% 的安装错误,HTTP header 分流客户端配置容易出错认真检查配置信息。

申明:

此为 wulabing/V2Ray_ws-tls_bash_onekey 的另一个分歧版本

源作者网址:https://github.com/wulabing/V2Ray_ws-tls_bash_onekey

修改内容如下:
1.修改路径分流为 HTTP Header 分流(随机生成 Header);
2.增加 Website 伪装站点。https://你的域名,(http 强制跳转 https 支持非443端口);
3.增加 Rinetd BBR 端口加速(支持 OpenVZ);
4.自动清除残余的 Http 服务(某些系统自带的 Apache2 以及重装脚本时需要清除的 Nginx );
5.每天凌晨自动升级 V2ray 最新内核,每天自动重启vps(减少小内存主机kill进程的几率);
6.增加 自动生成客户端 config.json 配置文件(Website 随机路径 在线下载,支持 v2rayNG 从 url 导入);
7.增加 一键删除客户端 config.json 配置文件,防止 Website 被抓取;
8.增加 一键更换新的 UUID;
9.增加 客户端 Kitsunebi ShadowRay v2rayNG BifrostV 的 http header 分流配置提示。
10.增加 V2ray 账号共享功能。
11.增加 脚本重装判断 自动跳过 ssl 重复申请。
12.解决部分设备上偶尔的断流问题(客户端导入 config.json文件)
13.增加 自动生成 v2ray-core-windows 客户端和便捷启动脚本,一键添加开机自启动服务,一键开启系统ie代理。
14.增加 赞助功能

其它与原版一致,详细说明请步移 https://github.com/wulabing/V2Ray_ws-tls_bash_onekey

v2ray_ws-tls_website_onekey's People

Contributors

dylanbai8 avatar

Stargazers

 avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar

Watchers

 avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar

v2ray_ws-tls_website_onekey's Issues

PC客户端V2ray闪退

用的host的哪个一键脚本,安装成功,手机端配置也成功,但PC端v2ray闪退,用v2rayN 导入配置文件转换失败,手动配置信息,运行显示连接v2ray内核失败,v2ray版本4.5,请教能不能帮分析下什么问题?感谢!

刚装完没过多久就不行了

截取了一段日志:
2018/04/09 12:06:19 [Info] [1217872578] App|Proxyman|Mux: dispatching request to tcp:assets-cdn.github.com:443
2018/04/09 12:06:19 [Info] App|Router: failed to get IP address > App|DNS: returning nil for domain avatars0.githubusercontent.com.
2018/04/09 12:06:19 [Info] App|Router: failed to get IP address > App|DNS: returning nil for domain assets-cdn.github.com.
2018/04/09 12:06:19 [Info] [3484079463] App|Dispatcher: default route for tcp:assets-cdn.github.com:443
2018/04/09 12:06:19 [Info] [3484079463] App|Proxyman|Mux: dispatching request to tcp:assets-cdn.github.com:443
2018/04/09 12:06:19 [Info] App|Router: failed to get IP address > App|DNS: returning nil for domain avatars0.githubusercontent.com.
2018/04/09 12:06:19 [Info] [197919199] App|Dispatcher: default route for tcp:avatars0.githubusercontent.com:443
2018/04/09 12:06:19 [Info] [197919199] App|Proxyman|Mux: dispatching request to tcp:avatars0.githubusercontent.com:443
2018/04/09 12:06:19 [Info] App|Router: failed to get IP address > App|DNS: returning nil for domain assets-cdn.github.com.
2018/04/09 12:06:19 [Info] [1033206606] App|Dispatcher: default route for tcp:assets-cdn.github.com:443
2018/04/09 12:06:19 [Info] App|Router: failed to get IP address > App|DNS: returning nil for domain github.com.
2018/04/09 12:06:24 [Info] Transport|Internet|WebSocket: creating connection to tcp:asdfwx.tk:443
2018/04/09 12:06:25 [Info] [1060882405] Proxy|Socks: TCP Connect request to tcp:www.googleapis.com:443

是Freenom的DNS问题?

麻烦大佬解答下,感谢!

无网络……

安装完成后,配置好了,伪装网站能打开,开始vpn,无网络,是怎么回事儿啊?

新写个脚本:满足你们的各种要求

开源地址:

https://github.com/dylanbai8/Onekey_Caddy_PHP7_Sqlite3

脚本特性:



  • 小内存VPS 一键安装 Caddy+PHP7+Sqlite3 环境 (支持VPS最小内存64M)
  • 一键绑定域名自动生成SSL证书开启https(ssl自动续期)、支持IPv6
  • 一键安装 typecho、wordpress、zblog、kodexplorer、laverna、一键整站备份
  • 一键安装 v2ray、rinetdbbr
  • 经典组合 [Website(caddy+php7+sqlite3+tls)+V2ray(vmess+websocket)]use_path+Rinetdbbr
  • 支持系统:Centos 7+ Debian 8+ (建议选择 Debian 8 mini版)


一键安装 Caddy+PHP7+Sqlite3 环境

1.解析好域名 2.执行以下命令

3.提示:支持IPv6(AAAA记录)如果本地网络不支持IPv6可以通过cloudflareCDN转换为IP4

wget -N --no-check-certificate git.io/c.sh && chmod +x c.sh && bash c.sh

一键安装 typecho 博客

bash c.sh -t

一键安装 wordpress 博客

bash c.sh -w

一键安装 zblog 博客

bash c.sh -z

一键安装 kodexplorer 可道云

bash c.sh -k

一键安装 laverna 印象笔记

bash c.sh -l

一键整站备份(一键打包/www目录 含数据库)

bash c.sh -a

一键安装 v2ray 翻墙

bash c.sh -v

一键安装 rinetd bbr 端口加速

bash c.sh -b

一键卸载命令:

卸载 caddy
bash c.sh -unc

卸载 php+sqlite
bash c.sh -unp

卸载 v2ray
bash c.sh -unv

卸载 rinetdbbr
bash c.sh -unb

关于指定端口号无效

安装过程中把默认的端口号443改指定为其他端口如8080,4430,安装结果显示为自定义的端口号,但是客户端还是只能使用443连接成功,系统是debian9和ubuntu18.04,请问是什么原因,还是我没理解对什么?谢谢!

能用于挽救已经被墙的ip吗?

照着流程配置了一下,还是没法用。是不是因为我的ip已经被墙了缘故;如果不是,是不是因为cloudflare把我的真实ip隐藏起来了?

iOS客户端上无法使用配置

作者,您好~
有个问题想请教一下您,我用阁下的一键命令配置完V2Ray,在PC上V2RayN上使用正常,而在iOS上两个客户端(ShadowRocket和Kitsunebi)都无法正常使用,有办法可以调试一下吗?

GCP安装后,mydomain.com可以访问,www.mydomain.com不能访问,也无法下载配置文件等等

我是在GCP的debian9上安装的脚本。开放所有入站端口后运行脚本,也正常输出了配置。
系统信息

Debian 4.9.168-1+deb9u2 (2019-05-13) x86_64

域名解析已经检测过没有问题。
目前的情况是:

  • 访问mydomain.com跳转到nginx默认页面,说明80端口的http访问正常,对主机的端口探测也证实了这一点。
  • 访问www.mydomain.com时,无法访问。端口探测443也显示未开放。
    我根据这个推测是nginx服务器的问题。
    输入命令systemctl status nginx,显示如下:
● nginx.service - nginx - high performance web server
   Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
   Active: active (running) since Wed 2019-06-12 12:30:10 UTC; 30min ago
     Docs: http://nginx.org/en/docs/
  Process: 687 ExecStart=/usr/sbin/nginx -c /etc/nginx/nginx.conf (code=exited, status=0/SUCCESS)
 Main PID: 709 (nginx)
    Tasks: 2 (limit: 4915)
   CGroup: /system.slice/nginx.service
           ├─709 nginx: master process /usr/sbin/nginx -c /etc/nginx/nginx.conf
           └─710 nginx: worker process

Jun 12 12:30:10 chengzhang systemd[1]: Starting nginx - high performance web server...
Jun 12 12:30:10 chengzhang systemd[1]: nginx.service: PID file /var/run/nginx.pid not readable (yet?) after start: No s
uch file or directory
Jun 12 12:30:10 chengzhang systemd[1]: Started nginx - high performance web server.

说是pid文件找不到,我确认过该目录下是存在该文件的。网上找了半天,出现该问题的连nginx都没法启动,我这个居然启动后还报这个错。
再看v2ray的状态,似乎没什么问题。各位也帮忙参考一下。

● v2ray.service - V2Ray Service
   Loaded: loaded (/etc/systemd/system/v2ray.service; enabled; vendor preset: enabled)
   Active: active (running) since Wed 2019-06-12 12:30:10 UTC; 30min ago
 Main PID: 688 (v2ray)
    Tasks: 7 (limit: 4915)
   CGroup: /system.slice/v2ray.service
           └─688 /usr/bin/v2ray/v2ray -config /etc/v2ray/config.json

Jun 12 12:30:10 chengzhang systemd[1]: Started V2Ray Service.
Jun 12 12:30:10 chengzhang v2ray[688]: V2Ray 4.19.1 (Let's Fly) Custom
Jun 12 12:30:10 chengzhang v2ray[688]: A unified platform for anti-censorship.
Jun 12 12:30:11 chengzhang v2ray[688]: 2019/06/12 12:30:11 [Warning] v2ray.com/core: V2Ray 4.19.1 started

搞了半天,不知道该往何处排查问题了。@dylanbai8

10分钟后出现网络无法连接,网站失效

安装好后可以用10分钟左右,伪装网站正常,nginx正常,v2ray在运行,dns正常,
过了一会却无法使用vpn,伪装网站也无法访问 但是v2ray和nginx都在正常运行(default.conf中的nginx欢迎页可以通过ip正常访问)

这是客户端的提示
2018/12/07 15:35:18 [Warning] failed to handler mux client connection > v2ray.com/core/proxy/vmess/outbound: failed to find an available destination > v2ray.com/core/common/retry: [v2ray.com/core/transport/internet/websocket: failed to dial WebSocket > v2ray.com/core/transport/internet/websocket: failed to dial to (wss://www.twilighthome.fun/): > dial tcp 45.77.127.132:443: connectex: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.] > v2ray.com/core/common/retry: all retry attempts failed

用的新网的域名和dns nginx中查不到访问日志,防火墙已关闭

centos7 x64 用80端口安装脚本失败,nginx配置有点问题需纠正!

centos7 x64下安装脚本用80端口安装脚本失败默认443倒是可以,但是nginx配置得改,否则会直接打开nginx默认站点而不是音乐站,脚本有些小错误还需作者您小小修正,caddy版除了80端口也是不行之外暂时没发现这样的错误,想做免流所以v2ray必须80端口,同时又想ssl伪装,希望大侠针对这方面完善一下下,谢谢您的脚本,实在是很方便,对了,方便的话提供一下卸载功能吧。

希望加入二维码链接

比如这个一键代码 https://github.com/233boy/v2ray

---------- V2Ray 二维码链接 -------------

适用于 V2RayNG / Kitsunebi = https://transfer.sh/BTVXj/ODQxOS0xNzE0NS0yODc2NAo=_233blog_v2ray.png

适用于 Pepi / ShadowRay = https://transfer.sh/ooysG/OTY1Mi0zMTQzMy05NDg3Cg==_233blog_v2ray.png

请在 Pepi / ShadowRay 配置界面将 Alter Id 设置为 233 (如果你使用 Pepi / ShadowRay)

请在 Pepi / ShadowRay 配置界面打开 TLS (Enable TLS) (如果你使用 Pepi / ShadowRay)

证书过期了,如何手动更新证书呢?

如题,输入crontab -e也看到了:
50 0 * * * "/root/.acme.sh"/acme.sh --cron --home "/root/.acme.sh" > /dev/null
但是,证书还是过期了。请问一下,如何手动更新证书呢?

统一回答:卸载 Rinetd BBR 命令

逐行执行以下命令:

1.取消开机自启动
systemctl disable rinetd-bbr >/dev/null 2>&1

2.杀死rinetd bbr进程
systemctl stop rinetd-bbr >/dev/null 2>&1
killall -9 rinetd-bbr >/dev/null 2>&1

3.卸载程序 并删除配置文件
rm -rf /usr/bin/rinetd-bbr /etc/rinetd-bbr.conf /etc/systemd/system/rinetd-bbr.service >/dev/null 2>&1

W: GPG error: http://nginx.org/packages/mainline/ubuntu bionic InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY ABF5BD827BD9BF62

[OK]  正在更新源 请稍后 ……
Get:1 http://security.ubuntu.com/ubuntu bionic-security InRelease [88.7 kB]
Get:2 http://nginx.org/packages/mainline/ubuntu bionic InRelease [2859 B]
Err:2 http://nginx.org/packages/mainline/ubuntu bionic InRelease
  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY ABF5BD827BD9BF62
Hit:3 http://archive.ubuntu.com/ubuntu bionic InRelease
Get:4 http://archive.ubuntu.com/ubuntu bionic-updates InRelease [88.7 kB]
Hit:5 http://archive.ubuntu.com/ubuntu bionic-backports InRelease
Reading package lists... Done
W: GPG error: http://nginx.org/packages/mainline/ubuntu bionic InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY ABF5BD827BD9BF62
E: The repository 'http://nginx.org/packages/mainline/ubuntu bionic InRelease' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
[错误]  缺少必要依赖 脚本终止安装

生成config配置文件失败

[OK]  正在生成Windows客户端 v2ray-core最新版本 v4.19.1
Archive:  V2rayPro.zip
  inflating: V2rayPro/readme.txt
  inflating: V2rayPro/start.bat
   creating: V2rayPro/v2ray/
  inflating: V2rayPro/v2ray/wv2ray-service.exe
...
cp: failed to access './V2rayPro/v2ray/config.json': Not a directory

似乎是生成打包客户端压缩包时候出错,下载的zip只有3个文件
( readme.txt、start.bat、v2ray[无后缀二进制文件] )

另外怎么将所有配置信息像刚部署完那样再全部打印出来
(有些参数不记得了,json文件又生成失败了= =!)

伪装站点无法打开

403 Forbidden
nginx/1.15.6
系统是debian8,域名成功解析,配置也成功且可以上网,唯独伪装域名打不开

希望未来有H2+TLS+ Website 伪装站点的一键脚本

源作者那边已经有http2+TLS的版本了,但是还是觉得有Website 伪装站点要安全一些。我自己瞎搞了半天caddy还是不知道怎么设置反代,期待大大未来能够做个一键脚本方便大家,谢谢!

买小鸡安装发现有一半几率出错:安装文件下载失败,请检查下载地址是否可用

27 Jul 03:49:51 ntpdate[589]: Can't adjust the time of day: Operation not permitted
[OK] 时间同步成功
[OK] 当前系统时间 Fri, 27 Jul 2018 03:49:51 -0400(时区时间换算后误差应为三分钟以内)
converted 'https://install.direct/go.sh' (ANSI_X3.4-1968) -> 'https://install.direct/go.sh' (UTF-8)
--2018-07-27 03:49:52-- https://install.direct/go.sh
Resolving install.direct (install.direct)... 104.27.174.71, 104.27.175.71, 2400:cb00:2048:1::681b:af47, ...
Connecting to install.direct (install.direct)|104.27.174.71|:443... connected.
HTTP request sent, awaiting response... 403 Forbidden
2018-07-27 03:49:52 ERROR 403: Forbidden.

[错误] V2ray 安装文件下载失败,请检查下载地址是否可用

是不是脚本里面等待下载反应时长太短了?

mac客户端开始的时候能用,一天后就不能用了

v2rayU客户端的log显示:
A unified platform for anti-censorship.
Failed to start v2ray.com/core/app/proxyman/inbound: failed to listen TCP on 1080 > v2ray.com/core/transport/internet: failed to listen on address: 127.0.0.1:1080 > listen tcp 127.0.0.1:1080: bind: address already in use
V2Ray 4.16.0 (Po) 20190214

[error] generation of SSL certificate fails

[Wed Dec 12 17:41:50 CST 2018] Installed to /root/.acme.sh/acme.sh
[Wed Dec 12 17:41:50 CST 2018] Installing alias to '/root/.bashrc'
[Wed Dec 12 17:41:50 CST 2018] OK, Close and reopen your terminal to start using acme.sh
[Wed Dec 12 17:41:50 CST 2018] Installing cron job
[Wed Dec 12 17:41:50 CST 2018] Good, bash is found, so change the shebang to use bash as preferred.
[Wed Dec 12 17:41:51 CST 2018] OK
[Wed Dec 12 17:41:51 CST 2018] Install success!
[OK] 安装 SSL 证书生成脚本 添加证书自动续签任务 完成
[Wed Dec 12 17:41:53 CST 2018] Standalone mode.
[Wed Dec 12 17:41:53 CST 2018] Single domain='weareafamily.tk'
[Wed Dec 12 17:41:53 CST 2018] Getting domain auth token for each domain
[Wed Dec 12 17:41:53 CST 2018] Getting webroot for domain='weareafamily.tk'
[Wed Dec 12 17:41:53 CST 2018] Getting new-authz for domain='weareafamily.tk'
[Wed Dec 12 17:41:57 CST 2018] The new-authz request is ok.
[Wed Dec 12 17:41:57 CST 2018] Verifying:weareafamily.tk
[Wed Dec 12 17:41:57 CST 2018] Standalone mode server
[Wed Dec 12 17:42:03 CST 2018] Pending
[Wed Dec 12 17:42:06 CST 2018] Pending
[Wed Dec 12 17:42:12 CST 2018] Pending
[Wed Dec 12 17:42:15 CST 2018] weareafamily.tk:Verify error:Fetching http://weareafamily.tk/.well-known/acme-challenge/Hkueosi_J4WNQkB3r_2pIt2Qj5e7rO-lUbV2SCkiB8Y: Timeout during connect (likely firewall problem)
[Wed Dec 12 17:42:15 CST 2018] Please add '--debug' or '--log' to check more details.
[Wed Dec 12 17:42:15 CST 2018] See: https://github.com/Neilpang/acme.sh/wiki/How-to-debug-acme.sh
[错误] SSL 证书生成失败

关于ip限速

我搭建的v2ray账号想分享给朋友使用,但考虑到流量问题,想对连接v2ray服务器的ip进行限速,比如单个ip限速300kb/s,请问能做到吗?

安装好之后,如何判断是否正常fq?

一键安装好以后,在xshell里并没有发现任何错误。按照安装完后,给的配置文件。用任何设备都无法FQ,手机端,路由端,电脑端都不行。用的都是全局模式
1、没有开启cdn,是灰色云朵。
2、直接访问域名,网站在播放音乐,这按理说反代正常啊。
3、电脑端v2ray内核也是用的最新的。
4、IP没有被墙,用kcp 可以正常使用v2ray。
5、22 443 端口也都开着呢。
求大神给个思路,我该怎么排除到底问题出在哪了?

希望增加Rinetd BBR自动判断是否系统自带BBR.

希望增加Rinetd BBR自动判断是否系统自带BBR.像搬瓦工centos6/7都是自带BBR,我用centos7—BBR版本安装一键脚本一次成功,手动停止Rinetd BBR还让取消自启,一切正常,挺好用的脚本,实在是感谢胖爷的杰作!辛苦了!希望您持续更新该脚本,再有一点建议,可不可以把伪装的站点改成那种文件下载站,比如搭建H5AI文件服务器,一点建议谢谢,现在这个也已经很牛逼了!

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.