dots-tb / lolicon Goto Github PK

Hello, i know you shared a fix for Adrenaline and it's perfectly working. The only problem is that your last official version is fixing some issues i had, so it would be cool if you could put the Adrenaline fix in the last version, thanks.

Killzone often freeze while set to holy shit cpu- 500mhz to play on botzone

.

if you stay in adrenaline,with this plugin on,and put vita to stand by,sometimes,vita crash when press power button

Great work on this so far, but I'd love if there was a config for the buttons that bring up the menu.

I have not tested on my PSVita (testing with my VitaTV), but when I try to save (either as Default of for the particular app), There was a problem saving : 1 flashes at the top of the screen. Using SD2Vita as ux0:, tai is in ur0: if that makes a difference. There is a LOLIcon folder in uma0: also.

Retroarch emulators get little to no improvement when increasing GPU Clock up to 333mhz from the base 166mhz but setting it to 500mhz CPU clock will make games like Secret of Mana, Super Metroid (snes9x-2005 plus) and FBA and GBA titles run at a stable 60fps. It would probably help conserve battery if the GPU remained at stock speed while only beefing up the CPU.

When i restarted my vita after installing it will freeze on the eplipsey warning and shut down

hi i write here because nobody can help me in another forum,so if sombedy have few time for read my problem any help is welcoming :)

i have 2 ps vita in same software configuration 3.60 and enso just one thing is different one have original sony memory card and other sd2vita.
i installed lolicon plugin with autoplugin on two consoles
-with the first (with sony memory card) and plugin isntalled in ur0: no problem it s working perfectly!
-with second (sd2vita) and plugin installed in ur0(like first) i have no vsh menu in all game,i think plugin doesn t load!

so here is what i alread did:
-verify config.txt and it s ok i have
*kernel
ur0:tai/gamesd.skprx
ur0:tai/nondrm.skprx
ur0:tai/lolicon.skprx
-verify lolicon.skprx is présent in tai folder
-change oder in config.txt like
*kernel
ur0:tai/lolicon.skprx
ur0:tai/gamesd.skprx
ur0:tai/nondrm.skprx
-check everythink are same like other psvita...
-i spécify other plugin gamesd.skprx(for sd2vita) and nondrm.pskprx working well !!!

so i was wondering if lolicon is compatible with sd2vita config and if you have any idéas or solutions for me i take it!

congratulations for dev work ! i test with shantae hgh without plugin i see lag and fall framerate but with it it s run perfectly with constant fps !

When you are in an app whos Title ID starts with "NXPS", the Vita crashes if you try and use the "Exit Game" option in the plugin menu.

I've successfully got the plugin working on the Vita, but on my PSTV I can open the menu but then not move in it at all. It's the exact same version of the plugin (the most recent one) and I've made the same modifications to config.txt in ur0/tai - the only difference I can think of is the Vita is on Enso 3.65 while the PSTV is Enso 3.60, though I believe both are supported so this shouldn't be an issue. Anything you can do?

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididLorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.unt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.

Every-time I launch adrenaline it goes straight to black screen and the ps vita is completely unusable. Even if you press the ps button, it's completely frozen. The only way to make it work again,it's having a soft reset by pressing the on/off button for 15 seconds and access the boot menu.
No matter if you start adrenaline from its bubble or if you start the game from a bubble made with bubble manager, same thing happens.

Does anyone have the same problem?

@dots-tb

my vita keeps turning off right before the epilepsy warning. i have the latest version of your plugin but this keeps happening whenever i turn my vita on/off, its random but today its happened 5 times and am getting fed up of the "vita did not shutdown properly" message when in the live area after i successfully boot back into the vita.

i did save both config files default and main for the live area. unsure as to why this is affecting even after the hotfix update.

yes my plugin text is on the first line on config.txt under kernel.

still no luck though as this happens and needs to be addressed.

OMG I CANT BELEIVE YOU WOULD GO OUT OF YOUR WAY TO SUPPORT PEOPLE DRAWING HARMLESS PICTURES OF ANIME CHARACTERS THAT HURT NO ONE BESIDES THE EASILY-OFFENDED
OBVIOUSLY WE SHOULD CENSOR THIS BECAUSE ITS DISGUSTING AND FREAKIN CHILD PORN UWU
WE NEED TO BAN THIS TERRIBLE ART CALLED "DRAWING". BECAUSE IT MAKES PEOPLE INTO PEDOPHILES

CHILD PORN YA KNOW THERE FICTONAL AGE MEANS EVERYTHING RIGHHTHTTT?

#THINK OF THE CHILDREN THATLL BE EXPLOITED BECAUSE OF THIS RELEASEEEE OMG YOUR A PEDOPHILE!!! YOUR A PEDOOOOOOOOOOOOPHIIILEEEEEEEEEEEEEEEEEEEEEEE

REMEMBER DRAWINGS ARE EVIL! AND THE WORK OF THE DEVIL

UNSUBSCRIBED & REPORTED
ALSO I CALLED THE POLICE

-Silica

I've got an OLED vita with 3.68 hencore installed. When I run an ISO PSP game, put it on standby/sleep mode and turn it back on there's either no sound on the PSP game it or it crashes. I used the test build you posted a month ago when a user had a problem loading adrenaline with the lolicon plugin installed. Thanks for what you do.

completely crash the system when taking screenshots on adrenaline, forcing to do a hard reset.

Good work in 3.68 adrenaline.Thank you very much

@dots-tb

This wasn't happening when I was using VHS menu before, and only started after I deleted the VHS plugin and installed LOLIcon, but for example, 4 times now while playing Borderlands 2 at 444 MHz (Max Performance, one level below the HOLY **** level), the game's just froze, and it'll stay frozen until I restart my Vita. I know it's not just a borderlands issue, because the other game I tried to play for that long too froze the same way, DBZ Shin Budokai through adrenaline, which I know didn't have this problem before, either.

What about gpu overclock? Is it feasible?

Thanks for the amazing plugin!

Well, each time I start a game or exit the sleep mode, these green things: Configuration loaded always come up.
I know it's not something really serious,but, you know, I just want to figure out whether it's a glitch.
Sorry for I'm suffering OCD, anyway, thank you for your work.

Official cart version, version 1.01

Hatsume Miku f 2nd and Borderlands 2 are not affected by the button swapping.

i was wondering if it would be possible to implement dynamic clockspeeds in lolicon. personally i'd like to save battery when not needing the oc.

When using adrenaline standby, it still crashes and expects to be repaired again

Games like YS VIII asian version gets stuck on the splash screen. Might just be the game requiring too much Ram or something.

Hello, i noticed a issue with Postal on ps vita, the message for configuration loading stay in the top left corner, and wont dissapear.

If anyone have a solution, i tried to re install from scratch , remove all my document about lolicon plugin, but the message is still there and wont go away when i play Postal.

It is this port of Postal http://wololo.net/2019/01/06/postal-vita-released-going-postal-on-your-beloved-psvita-is-now-totally-possible/

hello, could you add more overclocking options for example cpu 333 gpu 222 etc, game def and max perf are too high and too similar, also could you make that all the overclocking options and not only 500mhz unlock the maximum brightness in the games? or better yet if you can create a separate plugin

I wonder if we can extract the overclock module into user mode.
And then build a console just like oclockvita.
(Just want a simpler actual overclock console, and not run in every app)

I did what the instructions told me too but when I try and open the menu on my PStv and nothing happens also my adrenaline stopped working so had to uninstall it.(I also tried autoplugin same thing)

Enable holy shit setting in the livearea and save as default and then save for main.

once you enter a game the brightness will remain at full and you can freely move it up and down.

It sometimes reverts the slider to the normal max limit if the GPU clock goes under333mhz (under the second highest and holy shit settings in lolicon) this only happens sometimes and I dont know why but the full brightness works nearly every time

I'm on an OLED vita with an sd2vita and 3.65 enso
VIDEO LINK: https://www.youtube.com/watch?v=IwsNe_pK6S4

Thanks for the great plugin

pretty self explanatory, i can open and close the lolicon menu just fine, but cannot move up or down to any options while in it

Im on 3.68 hencore, using a PSTV

If you swap O/X [in Asian games so X accepts and O returns] it will also swap controls in LOLIcon's menu (O now accepts and X returns) and same goes to OS elements like saving or loading saves.

In all modes except the 500mhz and the max baterry, all put 444mhz CPU Speed
I do not know if it's a visual bug or by default the plugin always makes the vita run at 444mhz

Hello, i have same problem #1 with 3.65 Enso CFW by TheFlow ( update365 )

run adrenaline already error please Introduce me

Playing Assassin's Creed III Liberation, 'Holy Shit' profile loaded. The green info display "Configuration loaded. : 4" displays and doesn't disappear unless I open and close the LOLIcon menu.

I know nothing is random, but I haven't figured out what triggers it.

Also, I'd love an option just to turn off the display. Won't solve the underlining issue, but for me would make it moot.

This is more of an observation than anything else but is the lolicon menu supposed to appear in adrenaline? I cant get it to come up but if I set lolicons default clock to 500mhz its still effective in adrenaline and smooths out gameplay a ton on PSP games.

I'm on enso 3.65 with adrenaline 6.1-7

thanks for the great work. I was also wondering if cpu and gpu clocks could be adjusted separately as everything on the psp seems to be strangled by the cpu and not the gpu, purely for battery life.

thanks again

When playing Iconoclasts the text doesn't disappear.

Hello gave this a try but seems if you play a game on adrenaline or even try to launch adrenaline the ps vita will just hang. I removed this plugin to make sure it wasn't something else but when I removed it, adrenaline started working again.

Also I didn't really notice and performance increase. I tested it with a few games like minecraft and borderlands 2.
I think minecraft it made a slight difference but with borderlands 2 I swear it actually made the fps worse until I put the oc back to the game default or default.

Another thing does the overclock drain the battery? I have the old 1000 phat ps vita

Hello, can you please fix this plugin to support game pcse00471 and pcse00376
For pcse00471 game stuck on loading while checking dlc...
For pcse00376 game dlc not detect after use this plugin...

I just stuck when I started 'Carton fighter W' in 500Mhz mode, I can only start it normally in 444Mhz mode or lower.