This is simple server to supply images to a matching WLED usermod to display on matrices of different sizes.

The hardware consists of 3 parts:

• an LED matrix, either off-the-shelf or handmade using LED strips joined together to form a grid (WS2812, WS2815 etc)
• a wifi enabled microcontroller to run WLED (an ESP32 is recommended)
• a server, either on your LAN or accessible over the internet. This does not have to be powerful- a Raspberry Pi Zero W will do.

Other optional components include a push button wired to the microcontroller to trigger a configuration portal, and a buck transformer to run the microcontroller if the strip runs at 12V (the ESP8266 runs at 5V).

To generate a clean matrix with square pixels, you need a diffuser screen. This design can be used to 3D print arbitrary sized diffusers.

This is a node.js / express server that responds to requests for images from WLED clients, decoding images (jpg, gif, png) to raw pixel values and sending them to the client as JSON. It includes an admin interface that allows for uploading images and curating playlists of images, including setting background colours for transparent images. It keeps track of each clients' progress through assigned playlists. It understands multi-frame gif images, but the clients' ability to decode multiframe gifs is limited by the memory of the device - an ESP32 is recommended for the extra memory provided.

Images are stored in the img directory under the server. A given image's unique ID is its path relative to the img dir. You do not have to use the provided upload mechanism to add images, you can instead just place images in the directory in question an restart the server, to trigger a rescan of the contents.

Clients make only 2 calls to the server:

• On boot, they attempt a connection to /checkin, passing the id stored in their firmware. This registers a new client allowing it to be configured in the administration interface.
  example: http://192.168.0.xx/checkin?id=my-grid-id

• after this, the client repeatedly calls the /image endpoint to request images for display, including its id to identify which playlist to load the next image from. It also supplies a width and height, to indicate to the server the data required.

The timing of these calls (ie the display time per image) is determined by the metadata returned from the server (an attribute of the playlist).
example: http://192.168.0.xx/image?id=my-grid-id&width=16&height=16

• install node.js
• install yarn with npm install -g yarn
• with nodejs installed, run yarn from within the server directory to install all dependencies
• from within the same dir run node ./server.js to start the server. Use the --port xxxx switch to choose a port to run it on. The admin interface should be available at this url.
• if you wish to run the server at system startup, I recommend installing pm2, the node process manager. You can then add the server process to pm2 with the command pm2 start server.js -- --port xxxx" and pm2 save to save the config. YOu then just need pm2 to run on startup