Two Tree Marlin Bugfix build that can be compiled for multiple types of Two Trees printers by just editing a single setup file.

License: GNU General Public License v3.0

C++ 75.17% C 19.52% Makefile 0.32% Objective-C 2.37% Python 0.86% Shell 0.74% PHP 0.08% GDB 0.01% OpenSCAD 0.06% JavaScript 0.46% G-code 0.02% HTML 0.33% CSS 0.07% Dockerfile 0.01%

marlin-firmware marlin bugfix bltouch two trees

two-trees-multi-printer-marlin-bugfix-compiler's Introduction

<<<<<<<< PLEASE READ THIS CAREFULLY! >>>>>>>>

This firmware has a couple of changes from standard to make it less hassle to maintain and customise. So please bare these notes in mind!

Edit one file only located in "\Marlin\setup.h". Only have one option active at a time, unless its a field, eg. custom drivers or probe offset.
The BLTouch/3D Touch 2pin trigger cable is plugged into the PW_DET header on the main board. NOT THE Z MIN/MAX ENDSTOP! << IMPORTANT
Junction Deviation is on and set to J0.13 by default. You may change this in the LCD in Setting > Configuration > Advanced > Junction Deviation
Linear Advance is on but is set to K0.00 by default. Setting > Configuration > Advanced > Fillament > Linear Advance 3a) Please note that Linear Advance is not compatible with the TMC2208 and is set to K0 on purpurse. If you change to a custom driver for the extruder. This will be set to K0.25 by default.
Thing to do on you first run: 5a) Do a PID Autotune. Go to Setting > Configuration > Advanced > Temperature Select PID Autotune E1 and choose 10C above the nominal highest temperature you are planning on printing on the hotend. Then, once finished; Select PID Autotune BED and choose 10C above the nominal highest temperature you will be using on the bed. Store the settings! (M500) 5b) Generate a bed mesh. Go to Settings > Motion > Bed Levelling (menu name is different depending on the type chosen below) Best practice is the put :M420 S1" after "G28" in you start gcode if you're not planing to run G29 in your start gcode. 5c) If you haven't calibrated your printer, please follow this link and do the step by step guide: https://teachingtechyt.github.io/calibration.html
Store settings after any changes you make in the LCD menus. Setting > Configuration > Store Settings (or run M500 in terminal).

Enjoy!

DJScope (Igor Rebenko) you can find me on the Two Trees Facebook Group if you need any queries answered.

PS. If you run into any weird behaviour by the printer, like weird homing and such. First restart the printer.
If still happening, initialise EEPROM, restore defaults, and store settings.
Last resort is to reflash the firmware file.
Usually a simple restart fixes all issues

Marlin 3D Printer Firmware

Additional documentation can be found at the Marlin Home Page. Please test this firmware and let us know if it misbehaves in any way. Volunteers are standing by!

Marlin 2.0 Bugfix Branch

Not for production use. Use with caution!

Marlin 2.0 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below.

This branch is for patches to the latest 2.0.x release version. Periodically this branch will form the basis for the next minor 2.0.x release.

Download earlier versions of Marlin on the Releases page.

Building Marlin 2.0

To build Marlin 2.0 you'll need Arduino IDE 1.8.8 or newer or PlatformIO. We've posted detailed instructions on Building Marlin with Arduino and Building Marlin with PlatformIO for ReArm (which applies well to other 32-bit boards).

Credits

The current Marlin dev team consists of:

Scott Lahteine [@thinkyhead] - USA Donate / Flattr:
Roxanne Neufeld [@Roxy-3D] - USA
Chris Pepper [@p3p] - UK
Bob Kuhn [@Bob-the-Kuhn] - USA
João Brazio [@jbrazio] - Portugal
Erik van der Zalm [@ErikZalm] - Netherlands

License

Marlin is published under the GPL license because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork.

While we can't prevent the use of this code in products (3D printers, CNC, etc.) that are closed source or crippled by a patent, we would prefer that you choose another firmware or, better yet, make your own.

two-trees-multi-printer-marlin-bugfix-compiler's People

Contributors

Stargazers

Watchers

Forkers

extreme2k rolandng84 thierryzoller fcvmv etaardvark itisnot-me

two-trees-multi-printer-marlin-bugfix-compiler's Issues

UBL moves Z in wrong direction

The UBL cold mesh probe moves the Z in the wrong direction, its moving away from the probe.

I have tmc 2209 on x, y and e0, tmc 2208 on z and e1

I have it set like this:

  #define INVERT_X_DIR true
  #define INVERT_Y_DIR true
  #define INVERT_Z_DIR true

  #define INVERT_E0_DIR true
  #define INVERT_E1_DIR true

TMC UART setup

hey, I was trying to get UART working for my 2209 drivers (BTT 2209 1.2) and im getting TMC Connection Error on the screen.

what is your wiring setup for UART?

I was following this guide on youtube https://www.youtube.com/watch?v=7ShcFKXrVHo
soldered both UART pins together and a jumper wire going to the pin as set in your pins_MKS_ROBIN_NANO.h

some places they mention a 1kohm resistor, not sure what is required.

Probe Wizard crashes with TFT-COLOR-UI

Fix here :
MarlinFirmware/Marlin#19738

modern_touch_mks_interface -fails to build on latest

1.Ensured all libraries are uptodate
2.Upon build I get thefollowing errors:

Compiling .pio\build\mks_robin_nano35\src\src\lcd\extui\lib\mks_ui\draw_step_settings.cpp.o
Marlin\src\lcd\extui\lib\mks_ui\draw_print_file.cpp: In function 'uint32_t lv_open_gcode_file(char*)':
Marlin\src\lcd\extui\lib\mks_ui\draw_print_file.cpp:376:1: warning: no return statement in function returning non-void [-Wreturn-type]
}
^
Marlin\src\lcd\extui\lib\mks_ui\draw_print_file.cpp: In function 'void lv_gcode_file_seek(uint32_t)':
Marlin\src\lcd\extui\lib\mks_ui\draw_print_file.cpp:451:3: error: 'card' was not declared
in this scope
card.setIndex(pos);
^~~~
Marlin\src\lcd\extui\lib\mks_ui\draw_print_file.cpp:451:3: note: suggested alternative: 'word'
card.setIndex(pos);
^~~~
word
*** [.pio\build\mks_robin_nano35\src\src\lcd\extui\lib\mks_ui\draw_print_file.cpp.o] Error 1
Marlin\src\lcd\extui\lib\mks_ui\draw_printing.cpp: In function 'void setProBarRate()':
Marlin\src\lcd\extui\lib\mks_ui\draw_printing.cpp:285:23: warning: 'rate_tmp_r' may be used uninitialized in this function [-Wmaybe-uninitialized]
rate = rate_tmp_r / gCfgItems.curFilesize;
~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
Marlin\src\lcd\extui\lib\mks_ui\draw_printing.cpp:291:24: warning: 'rate_tmp_r' may be used uninitialized in this function [-Wmaybe-uninitialized]
rate = (rate_tmp_r - (PREVIEW_SIZE + To_pre_view)) * 100 / (gCfgItems.curFilesize - (PREVIEW_SIZE + To_pre_view));
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2020-12-8 (GMT+8) firmware: Some issues encountered.

Just downloaded your firmware 1 hour back,

Stock Sapphire Plus

1- compiled successfuly
2 - flash successfully

Noticed the following issues

1 - screen calibration is on at every startup
1a - if screen calibration fails, unable to proceed, must restart printer

2 - restore defaults settings caused printer to be unresponsive
2a - must restart printer

3 - setup.h
3a - i noticed mks interfaceis on by default; are you planning to use that as the main interface?
3b - mks interface does not have align z axis :(

Enabling classic_stock_marlin leads to white screen on bootup

Now that it compiles enabling "classic_stock_marlin" results into booting into a white screen that doesn't react.

Compilling error

I have a issue with Compiling this Firmware for a org. Sapphire Plus.
Only i have change is the Board, to a MKS robin nano V1.X and Bltouch is pluged on Zmin_pin.

This is the Error for Compiling:

Terminal will be reused by tasks, press any key to close it.

Executing task in folder Two-Trees-Multi-Printer-Marlin-Bugfix-Compiler-main: C:\Users\Andy.platformio\penv\Scripts\pio.exe run <

Processing LPC1769 (platform: https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip; board: nxp_lpc1769; framework: arduino)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/nxplpc-arduino-lpc176x/nxp_lpc1769.html
PLATFORM: NXP Arduino LPC176x (0.1.3) > NXP LPC1769
HARDWARE: LPC1769 120MHz, 31.97KB RAM, 464KB Flash
DEBUG: Current (cmsis-dap) On-board (cmsis-dap) External (blackmagic, jlink)
PACKAGES:

framework-arduino-lpc176x 0.2.5
toolchain-gccarmnoneeabi 1.90301.200702 (9.3.1)
Converting Marlin.ino
LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ off, Compatibility ~ strict
Found 1 compatible libraries
Scanning dependencies...
Dependency Graph
|-- 1.0.0
Building in release mode
error:Command 'cmd /C dir I:' returned non-zero exit status 1.

Unable to find destination disk (Autodetect Error)
Please select it in platformio.ini using the upload_port keyword (https://docs.platformio.org/en/latest/projectconf/section_env_upload.html) or copy the firmware (.pio/build/LPC1769/firmware.bin) manually to the appropriate disk

Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\DebugMonitor.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\HAL.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\HAL_SPI.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\MarlinSerial.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_flash.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_sdcard.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_wired.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\fast_pwm.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\include\digipot_mcp4451_I2C_routines.c.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\include\i2c_util.c.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\main.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\tft\tft_spi.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\tft\xpt2046.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\timers.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\LCD_I2C_routines.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\LCD_pin_routines.c.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\u8g_com_HAL_LPC1768_hw_spi.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp.o
In file included from Marlin\src\HAL\LPC1768../../core/../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768../../core/../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768../../core/serial.h:24,
from Marlin\src\HAL\LPC1768\DebugMonitor.cpp:25:
Marlin\src\HAL\LPC1768../../core/../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\HAL.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\u8g_com_HAL_LPC1768_st7920_hw_spi.cpp.o
In file included from Marlin\src\HAL\LPC1768../../core/../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768../../core/serial.h:24,
from Marlin\src\HAL\LPC1768\DebugMonitor.cpp:25:
Marlin\src\HAL\LPC1768../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\u8g_com_HAL_LPC1768_st7920_sw_spi.cpp.o
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\u8g_com_HAL_LPC1768_sw_spi.cpp.o
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\HAL.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\eeprom_flash.cpp:39:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\HAL_SPI.cpp:51:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\eeprom_wired.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\usb_serial.cpp.o
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:527,
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\watchdog.cpp.o
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\eeprom_sdcard.cpp:25:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\HAL_SPI.cpp:51:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
Compiling .pio\build\LPC1769\src\src\HAL\shared\HAL_spi_L6470.cpp.o
| ^~~~~
Compiling .pio\build\LPC1769\src\src\HAL\shared\backtrace\backtrace.cpp.o
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\eeprom_flash.cpp:39:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
Compiling .pio\build\LPC1769\src\src\HAL\shared\backtrace\unwarm.cpp.o
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\eeprom_wired.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\eeprom_sdcard.cpp:25:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\main.cpp:34:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Compiling .pio\build\LPC1769\src\src\HAL\shared\backtrace\unwarm_arm.cpp.o
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\timers.cpp:31:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:34,
Compiling .pio\build\LPC1769\src\src\HAL\shared\backtrace\unwarm_thumb.cpp.o
from Marlin\src\HAL\LPC1768\tft\tft_spi.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\tft\xpt2046.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\main.cpp:34:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\timers.cpp:31:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\tft\tft_spi.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\tft\xpt2046.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\DebugMonitor.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\HAL.cpp.o] Error 1
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:527,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\watchdog.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\watchdog.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
In file included from Marlin\src\HAL\shared\backtrace../../../core/../inc/../pins/pins.h:527,
from Marlin\src\HAL\shared\backtrace../../../core/../inc/MarlinConfig.h:34,
from Marlin\src\HAL\shared\backtrace../../../core/serial.h:24,
from Marlin\src\HAL\shared\backtrace\backtrace.cpp:28:
Marlin\src\HAL\shared\backtrace../../../core/../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\HAL_SPI.cpp.o] Error 1
In file included from Marlin\src\HAL\shared../../inc/../pins/pins.h:527,
from Marlin\src\HAL\shared../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\shared\HAL_spi_L6470.cpp:28:
Marlin\src\HAL\shared../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_wired.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_sdcard.cpp.o] Error 1
In file included from Marlin\src\HAL\shared\backtrace../../../core/../inc/MarlinConfig.h:50,
from Marlin\src\HAL\shared\backtrace../../../core/serial.h:24,
from Marlin\src\HAL\shared\backtrace\backtrace.cpp:28:
Marlin\src\HAL\shared\backtrace../../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_flash.cpp.o] Error 1
In file included from Marlin\src\HAL\shared../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\shared\HAL_spi_L6470.cpp:28:
Marlin\src\HAL\shared../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\shared\backtrace../../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\shared../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\shared../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\shared\backtrace../../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\shared../../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
Marlin\src\HAL\shared\backtrace../../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:219:8: error: #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
219 | #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
| ^~~~~
compilation terminated due to -fmax-errors=5.
compilation terminated due to -fmax-errors=5.
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\tft\tft_spi.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\main.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\timers.cpp.o] Error 1
compilation terminated due to -fmax-errors=5.
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\tft\xpt2046.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\watchdog.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\shared\backtrace\backtrace.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\shared\HAL_spi_L6470.cpp.o] Error 1
================================================================================== [FAILED] Took 3.42 seconds ==================================================================================
Environment Status Duration

LPC1769 FAILED 00:00:03.419
============================================================================ 1 failed, 0 succeeded in 00:00:03.419 ============================================================================
The terminal process "C:\Users\Andy.platformio\penv\Scripts\pio.exe 'run'" terminated with exit code: 1.

Terminal will be reused by tasks, press any key to close it.

Executing task in folder Two-Trees-Multi-Printer-Marlin-Bugfix-Compiler-main: C:\Users\Andy.platformio\penv\Scripts\pio.exe run <

framework-arduino-lpc176x 0.2.5
toolchain-gccarmnoneeabi 1.90301.200702 (9.3.1)
Converting Marlin.ino
LDF: Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ off, Compatibility ~ strict
Found 1 compatible libraries
Scanning dependencies...
Dependency Graph
|-- 1.0.0
Building in release mode
error:Command 'cmd /C dir I:' returned non-zero exit status 1.

Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\DebugMonitor.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\HAL.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\HAL_SPI.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\MarlinSerial.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_flash.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_sdcard.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_wired.cpp.o
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\fast_pwm.cpp.o
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:28,
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\include\digipot_mcp4451_I2C_routines.c.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\include\i2c_util.c.o
from Marlin\src\HAL\LPC1768\HAL.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../core/../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768../../core/../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768../../core/serial.h:24,
from Marlin\src\HAL\LPC1768\DebugMonitor.cpp:25:
Marlin\src\HAL\LPC1768../../core/../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\main.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\tft\tft_spi.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\tft\xpt2046.cpp.o
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\timers.cpp.o
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768\HAL_SPI.cpp:51:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768\MarlinSerial.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\LCD_I2C_routines.cpp.o
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
Compiling .pio\build\LPC1769\src\src\HAL\LPC1768\u8g\u8g_com_HAL_LPC1768_hw_spi.cpp.o
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768\eeprom_sdcard.cpp:25:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768\eeprom_flash.cpp:39:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768\fast_pwm.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768\eeprom_wired.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\include../../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768\include\digipot_mcp4451_I2C_routines.c:30:
Marlin\src\HAL\LPC1768\include../../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\include../../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768\include\i2c_util.h:28,
from Marlin\src\HAL\LPC1768\include\i2c_util.c:29:
Marlin\src\HAL\LPC1768\include../../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768\tft\xpt2046.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768\tft\tft_spi.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\u8g../include/../../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768\u8g../include/i2c_util.h:28,
from Marlin\src\HAL\LPC1768\u8g\LCD_I2C_routines.cpp:28:
Marlin\src\HAL\LPC1768\u8g../include/../../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\u8g../../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768\u8g\u8g_com_HAL_LPC1768_hw_spi.cpp:58:
Marlin\src\HAL\LPC1768\u8g../../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768\timers.cpp:31:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\include\digipot_mcp4451_I2C_routines.c.o] Error 1
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfigPre.h:52,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:28,
from Marlin\src\HAL\LPC1768\main.cpp:34:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/Conditionals_LCD.h:25:4: error: #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
25 | #error "Sorry! FSMC TFT displays are not current available for HAL/LPC1768."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../core/../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768../../core/../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768../../core/serial.h:24,
from Marlin\src\HAL\LPC1768\DebugMonitor.cpp:25:
Marlin\src\HAL\LPC1768../../core/../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\fast_pwm.cpp.o] Error 1
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\HAL.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\u8g\u8g_com_HAL_LPC1768_hw_spi.cpp.o] Error 1
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\HAL.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../core/../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768../../core/serial.h:24,
from Marlin\src\HAL\LPC1768\DebugMonitor.cpp:25:
Marlin\src\HAL\LPC1768../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../core/../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\include\i2c_util.c.o] Error 1
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\eeprom_sdcard.cpp:25:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\eeprom_flash.cpp:39:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\HAL_SPI.cpp:51:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\u8g\LCD_I2C_routines.cpp.o] Error 1
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\eeprom_wired.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\eeprom_flash.cpp:39:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\eeprom_sdcard.cpp:25:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\HAL_SPI.cpp:51:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\tft\tft_spi.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\tft\xpt2046.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\main.cpp:34:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\eeprom_wired.cpp:24:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/../pins/pins.h:525,
from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:34,
from Marlin\src\HAL\LPC1768\timers.cpp:31:
Marlin\src\HAL\LPC1768../../inc/../pins/stm32f1/pins_MKS_ROBIN_NANO.h:29:4: error: #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
29 | #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\tft\tft_spi.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\timers.cpp:31:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768\tft../../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\tft\xpt2046.cpp:23:
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
In file included from Marlin\src\HAL\LPC1768../../inc/MarlinConfig.h:50,
from Marlin\src\HAL\LPC1768\main.cpp:34:
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:36:4: error: #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
36 | #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
| ^~~~~
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\MarlinSerial.cpp.o] Error 1
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:121:8: error: #error "Serial port pins (1) conflict with LCD pins!"
121 | #error "Serial port pins (1) conflict with LCD pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
Marlin\src\HAL\LPC1768\tft../../../inc/../HAL/LPC1768/inc/SanityCheck.h:168:6: error: #error "Serial port pins (3) conflict with X endstop pins!"
168 | #error "Serial port pins (3) conflict with X endstop pins!"
| ^~~~~
compilation terminated due to -fmax-errors=5.
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\HAL.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_flash.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\DebugMonitor.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_sdcard.cpp.o] Error 1
compilation terminated due to -fmax-errors=5.
compilation terminated due to -fmax-errors=5.
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\tft\xpt2046.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\HAL_SPI.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\main.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\eeprom_wired.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\tft\tft_spi.cpp.o] Error 1
*** [.pio\build\LPC1769\src\src\HAL\LPC1768\timers.cpp.o] Error 1
================================================================================== [FAILED] Took 2.77 seconds ==================================================================================
Environment Status Duration

LPC1769 FAILED 00:00:02.773

Does not store calibration/touch on Classic UI

Classic UI now builds however it seems to loose it's TFT touc/calibration capabilities after reboot:
1.Flash
2.Calibrate screen
3. Save
4. reboot - screen does no longer accept touch

2208 stealth chop and linear advance

Just to let you know that with the 1.2 board and the stock 2208 driver with your current firmware us buggy. Its not you but marlin itself.
MarlinFirmware/Marlin#16076
I was chasing an issue where the extruder would just stop with no reason it needed to. I tried disabling stealth chop and linear advance but it didn't make a difference. The only thing that made a difference is when I added a 2209 and changed the firmware to 2209 standalone.

Enabling Classic Marlin leads to failed compilation.

Enabling classic_stock_marlin leads to failed compilation.

#define classic_stock_marlin // This is like the old interface with monotone screens and turn nob controls but with touch buttons

Compile fails with :
Linking .pio\build\mks_robin_nano35\firmware.elf
.pio/build/mks_robin_nano35/src/src/lcd/dogm/ultralcd_DOGM.cpp.o:(.bss.u8g+0x0): multiple definition of `u8g'

\firmware\Two-Trees-Sapphire-Plus-Marlin-Bugfix-TFT-Color-UI-Port/Marlin\src\lcd\dogm/ultralcd_DOGM.cpp:222: multiple definition of `MarlinUI::show_marlin_bootscreen()'

Recommend Projects

React

A declarative, efficient, and flexible JavaScript library for building user interfaces.
Vue.js

🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript

TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
TensorFlow

An Open Source Machine Learning Framework for Everyone
Django

The Web framework for perfectionists with deadlines.
Laravel

A PHP framework for web artisans
D3

Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

javascript

JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
web

Some thing interesting about web. New door for the world.
server

A server is a program made to process requests and deliver data to clients.
Machine learning

Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Visualization

Some thing interesting about visualization, use data art
Game

Some thing interesting about game, make everyone happy.

Recommend Org

Facebook

We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft

Open source projects and samples from Microsoft.
Google

Google ❤️ Open Source for everyone.
Alibaba

Alibaba Open Source for everyone
D3

Data-Driven Documents codes.
Tencent

China tencent open source team.

djscopesofm / two-trees-multi-printer-marlin-bugfix-compiler Goto Github PK