dijji / repairtasks Goto Github PK

I have one thing for you to add. Several cleanup utilities (even ccleaner at one time) remove the windows\system32\logfiles\scm folder. This results in selected task "{0}" no longer exists errors within Task Scheduler. The fix is to recreate the missing folder and reboot. If you could add a check for this, that would be wonderful.

Here are some URL's for reference:
http://forum.piriform.com/?showtopic=22226
http://forum.piriform.com/?showtopic=21852
https://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-messege-the-selected-task-0-no-longer-exists/01e60fa1-8004-40b4-9cf0-247fb80edb56?page=10&auth=1

This work item was migrated from CodePlex

CodePlex work item ID: '1'
Assigned to: 'Dijji'
Vote count: '2'

So, when I try to build this in VS 2013 or 2015, I get an error along the lines of:

C:\Program Files (x86)\MSBuild\12.0\bin\Microsoft.Common.CurrentVersion.targets(2584,5): error MSB3552: Resource file "Properties\Resources.resx" cannot be found.

There's also some sort of complaint about System.Xaml not being found (apparently it doesn't actually exist until .NET 4.0), but that seems to just be a warning.

Same multitude of problems with with Task Scheduler occur after upgrade from Windows 10 to Windows 10 Anniversary edition. Machine was originally upgraded to Windows 10 from Windows 7 Pro, and seemed to run well for six months or so - until upgrade to Win10 Anniversary edition. Any chance that the Repair Tasks utility will be extended for Windows 10? As with the Win7 and Win8 situation, large number of errors begs for an automated solution. Judging from the growing number of complaints throughout the Internet - seems that just as many users have been blindsided by the issue as was the situation with regression to earlier Windows versions.

Attachments

Windows 10 Tasks.zip

This work item was migrated from CodePlex

CodePlex work item ID: '8'
Vote count: '1'

Hi
When I download and unzip the current release there does not seem to have an executable included, and when I hover on each item within extracted files there are none that I can run,(images below).
Thanks for your help.

Hello -
I have completed your most welcome and helpful procedure but have 16 tasks remaining. Of these only 5 are 'image corrupt' the remaining are 'not installed' and so to be ignored according to your previous comments.

Despite reruns using unzipped files I cannot correct the 5 remaining. Any suggestions as to why this happens?

Much appreciation for your initiative with this program

Attachments

Error and not installed.txt

This work item was migrated from CodePlex

CodePlex work item ID: '4'
Vote count: '1'

Hey not sure if i am just using Github wrong or what, but I download the zip but it is named RepairTasks-master (master node for the code) but inside there are no exe's if you could help me that would be great. Also your walkthrough discusses another file needed for windows 7 but links back to the other repo that no longer has the files. Thanks again.

I mistakenly downloaded Windows 10, then reverted back to 8.1
Yesterday, I used Tweaking Utility; some issues were not resolved.
The Task Scheduler doesn't work.

I ran Repair Tasks as directed, no errors were resolved.
I ran Repair Tasks again, no errors were resolved.

I've included a screen capture to help diagnose the issue.

The most likely scenario is to perform a complete System Restore from the laptop CD.

I hope to hear from you.

Thank you.

Attachments

ScreenCapture.JPG

This work item was migrated from CodePlex

CodePlex work item ID: '6'
Vote count: '1'

I had the same problem as everyone else after reverting from Win 10 pro 64 bit back to win 7 ultimate 64 bit. The utility seemed to restore all my tasks, but when I attempted to run a backup I got an error as follows "Windows backup failed while determining libraries location of one of the users included in backup.
Details: The filename, directory name, or volume label syntax is incorrect. error code 0x81000031"
Any ideas to fix this. Thanks!

Attachments

2016-04-04_1843.png

This work item was migrated from CodePlex

CodePlex work item ID: '2'
Vote count: '1'

Win 10 - 1607-14393.969 - Having problems with Task Scheduler. Receiving 43 "Task not installed" errors.
Ran 'Repair Tasks' it scanned and identified all errors.
Saved results and ran 'Repair'
Each of the 43 tasks failed due to:
"Recovery of task "%" failed with 'ERROR: No mapping between account names and security IDs was done.(41,8):UserId:'
Some listed (13,8), (40,8), (8,22), (22,8), (18,8), (15,8), .....
(results txt file attached.)
Any ideas? ? ?

Attachments

Results-032917.txt

This work item was migrated from CodePlex

CodePlex work item ID: '10'
Vote count: '1'

I couldn't make the unzip and remove function work. Still orig 5 errors. After scan, comment was not formatted.
I am a klutx, so maybe its me.
thankks

This work item was migrated from CodePlex

CodePlex work item ID: '3'
Vote count: '1'

I had a problem with my Task Scheduler, and, at first, your program didn't seem to help. But I wound up getting it to work by finding the tasks in the registry (at HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tasks. and .\Tree) and deleting them (after backing them up) and then using the Scan and Repair options in your program. To my surprise, this finally fixed the issue.

So I thought it might be nice if you could offer a way to automatically perform this feature. It would probably be prudent to backup the registry entries in a .reg file, just in case. But a "wipe tasks from registry and rebuild" might be useful for some users.

Or, at the very least, maybe a button that would open regedit at the correct location so people could mess with the tasks themselves if your program doesn't work at first.

When I click on scan in your repair tasks software I get the following message. scan terminated by unexpected error access to path c:\windows\system32\tasks is denied. How can this be corrected so I can complete a scan. yes all the task scheduling errors must have occurred when I switched back from upgrading to windows 10 back to windows 7. Thanks for your help!

This work item was migrated from CodePlex

CodePlex work item ID: '9'
Vote count: '1'

Hello, once I run the programm tasks are OK but some of the tasks appears to be deleted or not in sync within the task scheduler and the registry ... then i get the error "task {0} is unavaliable or has been deleted" : i tried many things, i cant get any of the windows folder tasks to work properly, i tried to export the problematic tasks from a fres W7 install then import to the broken windows computer, then import is OK but once i reboot the tasks are gone .... any ideas ?

Life saver! I can finally backup my computer after reverting from Windows 10! However, it shows that I still have 31 issues. I know that one of these 31 issues is defrag. I can't defrag. Help!

This work item was migrated from CodePlex

CodePlex work item ID: '7'
Vote count: '1'

Just joined the club and used the task repair utility from your site. It fixed all but 5, and I am unable to get them repaired. Here are the 5 I am left with:
Task: BackgroundConfigSureyor: The task image is corrupt or has been tampered with
Task: Rac Tack:
Task: WindowsParentalControls:
Task: IpAddressConflict2:
Task: IpAddressConflict2:
Hope someone can help. So tired of this mess on my brand new computer

This work item was migrated from CodePlex

CodePlex work item ID: '5'
Vote count: '1'