dhtech / fboss Goto Github PK

dhtech@wedge1:~$ sudo wedge_qsfp_util 15
Port 15
  ID: 0x0d
  Status: 0x00 0x00
  Interrupt Flags:
    LOS: 0x00
    Fault: 0x00
    Temp: 0x00
    Vcc: 0x00
    Rx Power: 0x00 0x00
    Tx Power: 0x00 0x00
    Tx Bias: 0x00 0x00
    Reserved Set 4: 0x00 0x00
    Reserved Set 5: 0x00 0x00
    Vendor Defined: 0x00 0x00 0x07
  Temperature: 0.000000 C
  Supply Voltage: 0.000000 V
  Channel Data:      RX Power        TX Power         TX Bias
    Channel 1:       0.000000mW      0.000000mW      0.000000mA
    Channel 2:       0.000000mW      0.000000mW      0.000000mA
    Channel 3:       0.000000mW      0.000000mW      0.000000mA
    Channel 4:       0.000000mW      0.000000mW      0.000000mA
    Power measurement is unsupported
    Reported RX Power is OMA
  Power set:  0x00      Extended ID:  0x9b      Ethernet Compliance:  0x00
  TX disable bits: 0x00
  Rate select is unsupported
  RX rate select bits: 0x00
  TX rate select bits: 0x00
  CDR support:  TX: supported   RX: unsupported
  CDR bits: 0x00
  Connector: 0x80
  Spec compliance: 0x00 0x00 0x00 0x000x00 0x00 0x00 0x00
  Encoding: 0x00
  Nominal Bit Rate: 0 MBps
  Ext rate select compliance: 0x00
  Length (SMF): 0 km
  Length (OM3): 0 m
  Length (OM2): 0 m
  Length (OM1): 0 m
  Length (Copper): 0 m
  Length (Copper dM): 12.7 m
  Length (Copper effective): 12.7 m
  Device Tech: 0x00
  Ext Module: 0x00
  Wavelength tolerance: 0x00 0x00
  Max case temp: 70C
  CC_BASE: 0x42
  Options: 0x00 0x00 0x00 0x00
  DOM Type: 0x00
  Enhanced Options: 0x00
  Reserved: 0xf2
  CC_EXT: 0xdd
  Vendor Specific:
    f2 00 07 e1 ca 3b 89 96  ce 6d 0a 26 7f ce 76 8b
    9f 31 aa 00 00 00 00 00  00 00 00 00 a7 68 73 1d
  Vendor: CISCO-DNI
  Vendor OUI: 00:00:00
  Vendor PN: CAZADERO-R
  Vendor Rev: 03
  Vendor SN: DTY212502JP
  Date Code: 20170703

E1006 18:25:53.389362 28705 WedgeProductInfo.cpp:136] json parse error on line 0: expected json value
E1006 18:25:53.389615 28705 WedgeProductInfo.cpp:67] json parse error on line 0: expected json value
E1006 18:26:39.302598 28708 FunctionScheduler.cpp:508] Error running the scheduled function <refreshTransceivers>: N8facebook5fboss10FbossErrorE: QSFP IDProm failed as QSFP is not ready

E1006 18:27:01.224939 28763 WedgeProductInfo.cpp:67] json parse error on line 0: expected json value
terminate called after throwing an instance of 'facebook::fboss::FbossError'
  what():  QSFP IDProm failed as QSFP is not ready
*** Aborted at 1538850421 (unix time) try "date -d @1538850421" if you are using GNU date ***
PC: @     0x7f5e3ac46fff gsignal
*** SIGABRT (@0x705b) received by PID 28763 (TID 0x7f5e439c8a80) from PID 28763; stack trace: ***
    @     0x7f5e416860c0 (unknown)
    @     0x7f5e3ac46fff gsignal
    @     0x7f5e3ac4842a abort
    @     0x7f5e3b55f0ad __gnu_cxx::__verbose_terminate_handler()
    @     0x7f5e3b55d066 (unknown)
    @     0x7f5e3b55d0b1 std::terminate()
    @     0x7f5e3b55d2c9 __cxa_throw
    @     0x562fdc2f9fa0 facebook::fboss::QsfpModule::setQsfpIdprom()
    @     0x562fdc2fc7e1 facebook::fboss::QsfpModule::updateQsfpData()
    @     0x562fdc2fbc34 facebook::fboss::QsfpModule::refreshLocked()
    @     0x562fdc2fba87 facebook::fboss::QsfpModule::refresh()
    @     0x562fdc30d81a facebook::fboss::WedgeManager::initTransceiverMap()
    @     0x562fdc2f5d77 facebook::fboss::QsfpServiceHandler::init()
    @     0x562fdc2f2ea4 main
    @     0x7f5e3ac342e1 __libc_start_main
    @     0x562fdc2f221a _start
    @                0x0 (unknown)