dfleury2 / boss-rc500-editor Goto Github PK

The tool does not allow to set Memory Play Level above 100, while there is no problem with setting Track Level to 200.

First Id like to thank you for this awesome application.
Would be possible to allow us to import WAV files (like we can in Boss Tone Studio), so I can use the app to setup my backtracks?

Thanks

Bonsoir.
Lorsque je connecte mon RC500 à mon PC Windows, il n'est pas reconnu en tant que périphérique USB.
Il n'apparait pas dans ma liste des PERIFERIQUES ET LECTEURS.
Pour qu'il soit reconnu j'ai deux solutions :

1. soit je lance BOSS TONE STUDIO for RC
2. soit je vais dans les paramètres du RC500 MENU>STORAGE>ON

Est il possible que BOSS RC EDITOR permette au RC500 d'être reconnu comme périphérique directement sans avoir a utiliser les solution 1 ou 2 ?

Cordialement.

Bonjour.
Pensez vous qu'il soit possible d'ajouter une fonction ANNULER / REFAIRE ?

Ca obligerai surement à avoir une gestion de fichiers temporaires en cache.
Cordialement.

J'ai renommé toutes mes MEMORY avec la fonction EDIT.
J'ai ensuite utilisé la fonction COPY pour modifier certain paramètres.
Malheureusement le nom de la MEMORY utilisée pour la copie à également été copié.

Bonsoir.
La fonction COPY est géniale. C'est surement la plus utile.
Elle pourrais peut être faire l'objet d'ajout d'options à cocher.
Exemple :
Je veux copier toute ma configuration sauf ce qui concerne la partie des options de RHYTHM.
Ou bien copier uniquement ma configuration des options de PLAY.

En gros il faudrait pourvoir sélectionner ou désélectionner TRACK1, TRACK2, RHYTHM, RECORD, LOOP FX, CONTROLE lorsque on souhaite utiliser la fonction COPY.

Merci.

Do you happen to know if through a configuration it would be possible to change the factory colors of PLAY (green), OVERDUB (yellow) and RECORD (red)? For colorblind people, the distinction between green and yellow is just impossible. Unfortunately, BOSS doesn't seem to offer it in the settings, so hopefully you might know a solution?

Hello,

First when i open the assign window , the target min and max values do not correspond to what i have in the looper. Second if i modify the values click apply and close the assign window, if i reopen it later the values are back to the default ones (so my modification was not taken into account).
I tried with both tempo and cur level1.

It is really paintaking to do that directly in the looper because the default value is very far (in particular for the tempo) from the targetted one, so one has to turn the button many times until reaching the wanted value.
Even in your software it would be much quicker to be able to change these values by entering digits with the keyboard.

if the assignment worked completely on one memory i could copy it to many other memories which seems to work well with your tool.
regards,
Fred

I tried running the app on my new RC 500 with firmware version v1.10 (released dec 2023). But no matter what I do in the app, nothing is updated on the device itself. Any thoughts?

Hi there,

I am migrating to a new Mac OS X computer with an M1 processor.

When starting the programme I receive the following error.

zsh: bad CPU type in executable: /Applications/Boss/RC/BossRc500

Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.

Regards,
Allen

Hi there,

How is the copy memory button supposed to behave?

For example, if I select '1' and '10' in the copy dropdown lists, when I press the button it says 'Do you want to copy memory slot 1 into slots from 1 to 10?'

This seems to copy everything from memory to slot 1 into EVERY memory from 1 to 10 (2,3,4,5,6,7,8,9,10 now have the settings from slot 1).

This is very good, because it allows assigns to be set up once and then put into all of the slots.

BUT how would I take settings from memory1 and just put them into one slot e.g. from memory1 to memory23?

Is that possible?

2nd question:

The detailed copy dialog box that allows selection of categories to copy between memories: is this only active when it is shown? or does it persist?

Thank you

Target MAX is not working correctly...
Need to check basic values.

Hi,
First off, Awesome job on the RC500 Editor!!
I have a few questions:
1)What Parameters are saved when saving a preset?
2) Is a preset the same as a full memory location?
3) I'm thinking that I can build a memory location in the RC500, load it into the editor and save it as a preset under presets. Is this correct?
4) This is actually an RC500 question:
I'm trying to build a midi controlled ALL STOP button. I'm using 3 assigns, using T1 STOP, T2 STOP and Rhythm STOP and connecting them all to Midi CC#24. Some respond when I hit the button, some don't.
Do you know how many assigns I can connect to 1 Midi CC#?
Thank you so much!

Operating System+version: Mac Monterey 12.1
Compiler+version: Clang 13.0.0
Conan version: 1.44.0
Python version: 3.9.9
Command line tools/Xcode version: 13.2.1

I finally succeeded in building make under MacOs ... Thanks to the founder ! 👍

In these three files:

~/jeanjean/boss-rc500-editor/sources/BossRc500/main.cpp
~/boss-rc500-editor/sources/BossRc500-MemoryCopy/main.cpp
~/boss-rc500-editor/sources/WidgetExamples/WidgetMain.cpp

Just delete these functions:

#ifdef LINUX

Q_IMPORT_PLUGIN(QXcbIntegrationPlugin)
#else
Q_IMPORT_PLUGIN(QWindowsIntegrationPlugin)
#endif

Now, trying to open binary from the terminal :

Last login: Tue Jan 4 15:06:19 on ttys001
~/boss-rc500-editor/build/sources/BossRc500/BossRc500 ; exit;
me@Mini-de-me ~ % ~/boss-rc500-editor/build/sources/BossRc500/BossRc500 ; exit;
qt.qpa.plugin: Could not find the Qt platform plugin "cocoa" in ""
This application failed to start because no Qt platform plugin could be initialized. Reinstalling the application may fix this problem.

zsh: abort ~/boss-rc500-editor/build/sources/BossRc500/BossRc500

Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.

[Opération terminée]

I don't know anything about Qt creator, could it be enough to just install a plugin in Qt ?
I check that, and I come back ...
Any help will be welcome ! Thanks.

Salut,
Merci d'avoir mis ce soft RC500 sur github ! Je vais essayer de l'installer sous mageia, sinon j'irai sur une VM debian.

Pour le moment , j'ai juste fait pip install conan a la place de
conan install .. -pr:b default -pr default -b missing
qui n'est pas possible sous mageia

et j'ai installé aussi le cmake fourni par mageia

j'ai deja une error sur cmake .. et aucune idee de comment corriger cela. Si j'essaye sous debian quelle version me conseilles tu ? (celle avec laquelle tu as du installer et tester avec succès)

CMake Error at CMakeLists.txt:24 (find_package):
By not providing "Findinja.cmake" in CMAKE_MODULE_PATH this project has
asked CMake to find a package configuration file provided by "inja", but
CMake did not find one.

Could not find a package configuration file provided by "inja" with any of
the following names:

injaConfig.cmake
inja-config.cmake

Add the installation prefix of "inja" to CMAKE_PREFIX_PATH or set
"inja_DIR" to a directory containing one of the above files. If "inja"
provides a separate development package or SDK, be sure it has been
installed.

-- Configuring incomplete, errors occurred!
See also "/home/henry/boss-rc500-editor/build/CMakeFiles/CMakeOutput.log".

Bonjour.
Après test de la version windows du 02/01/2022 que tom1gozzi à poster sur son compte OneDrive.
https://onedrive.live.com/?authkey=%21ALlZ4OaYjiIlLzs&id=DA3414B8F6017596%21156036&cid=DA3414B8F6017596

Voici les axes d'améliorations :

1. Il manque les fonction "réduire" et "agrandir" en haut à droite à coté de "fermer".
2. L'affichage de la version serai également un plus.
3. J'ai fais une version PDF traduite en français si tu veux pour les fenêtre d'aide contextuelles. Je te dépose le PDF en pièce jointe.
   RC-500 Parametres fr.pdf
4. L'aide contextuelle TRACK 2 > Loop Sync ne s'affiche qu'une demi seconde puis disparait. Ca s'affiche bien pour TRACK 1.
5. Même problème pour tous les targets de MENU > ASSIGN... > TARGET
6. L'aide contextuelle de CONTROL > Pedal 1 à CONTROL > Control 2 à une police d'affichage floue.
7. Il manque l'aide contextuelle dans ** SYSTEM...**

Merci pour ce logiciel génial.

The available patterns depends on the beat selected.

The index depends on how many pattern are presents
Ex: Shuffle1 is Pattern 19 for 4/4 beat but Pattern 5 for 15/8 beat

Hello! I can't seem to connect with the pedal; am I doing something wrong or does not work with my OS?
Running Mac, 10.14.6 Mojave

Looper is connected with USB to computer, looper in: Storage/connecting - mode
I open the software, press: file/open and choose mounted device: BOSS RC 500/ROLAND/DATA
As soon as I press enter, it crashes and following error shows:

Last login: Wed Sep 6 19:33:09 on ttys000
Katharinas-MacBook-Pro:~ katharina.grubmuller$ /Volumes/Boss-Rc500-Editor-0.0.9-Darwin/BossRc500 ; exit;
Resource Path [/Volumes/Boss-Rc500-Editor-0.0.9-Darwin/resources]
Loading font file [/Volumes/Boss-Rc500-Editor-0.0.9-Darwin/resources/fonts/D-DINCondensed.ttf]
[D-DIN Condensed] font family loaded
Loading theme file [/Volumes/Boss-Rc500-Editor-0.0.9-Darwin/resources/themes/Default.css]
Loading theme file [/Volumes/Boss-Rc500-Editor-0.0.9-Darwin/resources/themes/Empty.css]
Add theme file [/Volumes/Boss-Rc500-Editor-0.0.9-Darwin/resources/themes/Empty.css]
Loading theme file [/Volumes/Boss-Rc500-Editor-0.0.9-Darwin/resources/themes/GT1000.css]
Add theme file [/Volumes/Boss-Rc500-Editor-0.0.9-Darwin/resources/themes/GT1000.css]
Loading theme file [/Volumes/Boss-Rc500-Editor-0.0.9-Darwin/resources/themes/gt1000.png]
Memory: 1, Track: 1, Measure: 1
Memory: 1, Track: 2, Measure: 1
Beat signature: 4/4
qt.qpa.fonts: Populating font family aliases took 668 ms. Replace uses of missing font family "D-DIN Condensed" with one that exists to avoid this cost.
objc[4252]: Class FIFinderSyncExtensionHost is implemented in both /System/Library/PrivateFrameworks/FinderKit.framework/Versions/A/FinderKit (0x7fffa0dc03d8) and /System/Library/PrivateFrameworks/FileProvider.framework/OverrideBundles/FinderSyncCollaborationFileProviderOverride.bundle/Contents/MacOS/FinderSyncCollaborationFileProviderOverride (0x13b1b2f50). One of the two will be used. Which one is undefined.
dyld: lazy symbol binding failed: Symbol not found: __ZNSt3__14__fs10filesystem8__statusERKNS1_4pathEPNS_10error_codeE
Referenced from: /Volumes/Boss-Rc500-Editor-0.0.9-Darwin/BossRc500 (which was built for Mac OS X 10.15)
Expected in: /usr/lib/libc++.1.dylib

dyld: Symbol not found: __ZNSt3__14__fs10filesystem8__statusERKNS1_4pathEPNS_10error_codeE
Referenced from: /Volumes/Boss-Rc500-Editor-0.0.9-Darwin/BossRc500 (which was built for Mac OS X 10.15)
Expected in: /usr/lib/libc++.1.dylib

Abort trap: 6
logout
Saving session...
...copying shared history...
...saving history...truncating history files...
...completed.

[Processen slutförd]

Thanks for reply!

Hi David,
Thanks for creating this app.

I haven't tried it yet, but really appreciate your efforts.

While attempting to understand how the RC-500 is saving state, I was having a look at the MEMORY1.RC0 (and related) files on the looper (using a Mac) and noticing that certain info that is saved on the looper doesn't seem to match what is in the MEMORY1.RC0 file...any idea why?

Wondering specifically about the "Assign" midi info.
When I update the Assign info for a specific memory in the RC-500 using the looper physical controls, then I look at the MEMORY1.RC0 file, I do not see those updates reflected in the file afterwards (but I do see them on the looper display).

Wondering if you have any insight into what you learned about this and how it saves its state.

Thanks very much!
Dan

Thank you for a fantastic project.

I am trying to save to my RC-500 and I receive the following error message:

[inja.exception.file_error] failed accessing file at './resources/templates/MEMORY.txt'

I am on Mac OS X Monterey. I have a feeling that the problem is permissions for the app to access the directory - I will try to have a look at that.

I have tried running the app both from the disk image and from the 'Applications' folder.

I cannot write anything to the device because of this.

UPDATE:
I have given the app full disk access through the control panel and I am still receiving the error so this does not appear to be a permission/security issue.

Bonjour.
Un petit message pour penser à ajouter le bouton pour désactiver, mettre en veille le RHYTHM.
Merci.