1. Navigate to the Hubitat Package Manager App.

2. Click on "Install"

3. Click on "From a URL"

4. On the next screen, enter the following url: https://raw.githubusercontent.com/defunctzombie/hubitat-somfy-mylink/master/packageManifest.json

5. Click next

These steps are broken into three parts. Integration report, add the Mylink to Hubitat device, and shade configuration.

Integration Report

The integration report is generated by the Somfy MyLink mobile app. It contains information you need to later configure the MyLink within Hubitat.

1. Open the MyLink mobile app
2. Open the Integration page (found within the hamburger menu)
3. Select Control 4
4. If "Current System ID" is not set, select Change System ID and pick any word or phrase. Think of this as a sort of passphrase.
5. Select Get Integration Report
6. Keep your phone handy for the next section or click send to email yourself a copy.

Add MyLink to Hubitat

1. Navigate to the Devices page within your hub web interface.
2. Click Add Virtual Device
3. Enter a device name. Any name you wish to use for identifying this device within hubitat.
4. Under Type select "Somfy MyLink Hub"
5. Click Save.

Additional configuration fields will appear. Fill these in with the values from your configuration report.

The Device ## ID corresponds to the alphanumeric Target in the integration report. The Device ## Name can be anything to identify the device within hubitat.

Click Save Preferences. Then Click Create Child Devices

Shade Configuration

1. Navigate to your device list within the hubitat web interface.
2. Under your MyLink hub you should see all your shades.
3. Click on any shade device under the MyLink hub.
4. Adjust the Time (in seconds) for blind to open to how long it takes for your shade to go from open to closed.
5. Toggle Bottom-up if your shade opens/closes from bottom-to-top.
6. Click Save Preferences.
7. Test your shade with the Open and Close buttons.

You're all set! Enjoy!!