This project is part of the nfc-door-control-system: https://github.com/l-nn-rt/nfc-door-control-system

• PlatformIO to upload the software to the esp32 (We recommend PlatformIO extension for vscode)

• ESP32 microcontroller
• RC522 NFC-Reader module. A different module can be used (eg the pn532 module). Then the NFCReader class has to be changed.

• A relay can be connected to DC_DOOR_OPEN_PIN and GND. HIGH is given to that pin to open the door. Behavior of the pin can be modified in the Door class.
• A bell can be connected to BELL_PIN and GND. To ring the bell LOW has to be given to the pin. Behavior of the pin can be modified in the Doorbell class.
• A alarm device can be connected to ALARM_PIN and GND. The esp gives high to that pin if the Doorbell rings. Behavior can be changed in the Alarm class.
• Wiring of the NFC-Reader module according to the following diagram (in case RC522 is being used):

• Replace certificate.pem.crt and private.pem.key with your own ssl certificate and key. The files are only recognized if they are named exactly like the placeholders.
• Go to build_flags in platformio.ini and change the following macros:
  • WIFI_SSID and WIFI_PASSWORD. The esp will print it's IP address to the serial monitor if it managed to connect to WiFi.
  • DC_MDNS if you want a MDNS for the esp.
  • DC_MIDWARE_URL must be set to the base url of the midware. Including the terminating '/'!!!
  • PSKEY must be set to the same pre-shared-key as in the midware.
  • TOKEN_SEED must be set to the same token seed as in the midware.
  • Alarm and door open duration can be adjusted with DOOR_OPEN_DURATION_MILLIS and ALARM_DURATION_MILLIS respectively.
  • The remaining macros can be changed but it's not recommended. For example the capacity of the database can be increased but is bound by flash size.
• Connect the ESP32 to a USB port via Micro USB cable or USB to UART bridge.
• Use PlatformIO to upload to the esp32. To do that in vscode enter "PlatformIO: Upload" in the command palette.

The base URL of the ESP32 will be http://dc.local/ or http://$(IP)/ if DC_SERVER_SECURE=false and https://dc.local/ or https://$(IP)/ if DC_SERVER_SECURE=true.

For all requests provide the Pre-Shared-Key in the header psk.

Note that the NFC-Tokens on the ESP32 are seeded. So if you want to insert the NFC-Token 1234abcd you need to insert sha256(tokenSeed + 1234abcd) into the database.

URL: /door/

Method: POST

Authentication required: Yes

Data constraints:

No data constraints.

Condition: The Pre-Shared Key is valid.

Code: 200 OK

Content example: {}

Condition: Invalid json/missing field.

Code: 400 BAD REQUEST

Content example:

{
    "msg": "$(description)"
}

Condition: The Pre-Shared Key is invalid.

Code: 401 NOT AUTHORIZED

Content example:

{
    "msg": "$(PSK) is invalid"
}

Condition: Internal error.

Code: 500 INTERNAL SERVER ERROR

Content example:

{
    "msg": "$(description)"
}

To remove 1234abcd you need to calculate sha256(tokenSeed + 1234abcd) and put that into tokens.

URL: /token/

Method: DELETE

Authentication required: Yes

Data constraints deleteAll or tokens must be set.

Data example (deletes 3 Tokens):

{
    "deleteAll": false,
    "tokens": [
        "1234567",
        "3456789",
        "2345678"
    ]
}

Code: 200 OK

Content example: {}

Condition: Invalid json/missing field.

Code: 400 BAD REQUEST

Content example:

{
    "msg": "$(description)"
}

Condition: The Pre-Shared Key is invalid.

Code: 401 NOT AUTHORIZED

Content example:

{
    "msg": "$(PSK) is invalid"
}

Condition: Internal error.

Code: 500 INTERNAL SERVER ERROR

Content example:

{
    "msg": "$(description)"
}

Returns a hash of all seeded NFC-Tokens in lower hexadecimal represenation sorted lexicographically.

URL: /token/

Method: GET

Authentication required: Yes

Data constraints:

No data constraints.

Code: 200 OK

Content example: {}

Condition: Invalid json/missing field.

Code: 400 BAD REQUEST

Content example:

{
    "msg": "$(description)"
}

Condition: The Pre-Shared Key is invalid.

Code: 401 NOT AUTHORIZED

Content example:

{
    "msg": "$(PSK) is invalid"
}

Condition: Internal error.

Code: 500 INTERNAL SERVER ERROR

Content example:

{
    "msg": "$(description)"
}

Note that the NFC-Tokens on the ESP32 are seeded. So if you want to insert the NFC-Token 1234abcd you need to calculate sha256(tokenSeed + 1234abcd) and put that into tokens. Same goes for the token to replace.

URL: /token/

Method: PUT

Authentication required: Yes

Data constraints

Data example:

{
    "tokens": [
        {
            "toReplace": "1234567",
            "toPut": "890ABCD"
        }
    ]
}

Code: 200 OK

Content example: {}

Condition: Invalid json/missing field.

Code: 400 BAD REQUEST

Content example:

{
    "msg": "$(description)"
}

Condition: The Pre-Shared Key is invalid.

Code: 401 NOT AUTHORIZED

Content example:

{
    "msg": "$(PSK) is invalid"
}

Condition: Internal error.

Code: 500 INTERNAL SERVER ERROR

Content example:

{
    "msg": "$(description)"
}