davebaol / d2x-cios Goto Github PK
View Code? Open in Web Editor NEWA custom IOS for the Wii and Wii-U console, i.e. an IOS modified to add some new features not available in the official IOS.
License: Other
A custom IOS for the Wii and Wii-U console, i.e. an IOS modified to add some new features not available in the official IOS.
License: Other
What steps will reproduce the problem?
1. Launch "Kirby Return To Dremland"
What is the expected output? What do you see instead?
Expected: Game starts
Instead: Black screen, remote loses sync
What version of the product are you using? On what operating system?
German PAL version, d2x v7 base 56
Please provide any additional information below.
Works fine with d2x v6 base 56, issue tested twice
Original issue reported on code.google.com by [email protected]
on 8 Dec 2011 at 7:14
What steps will reproduce the problem?
1. Uninstall IOS55
2. Play Wii Sports Resort from usb with NeoGamma with IOS Reload block enabled
3. Try to watch the WM+ from inside the game
What is the expected output? What do you see instead?
Expected is that it plays the video, instead it resets to the system menu. And
if the game would just reset to the system menu, it should return to HBC
instead, like it does when selecting Wii Menu from the home menu.
What version of the product are you using? On what operating system?
d2x v7 final base IOS56
Please provide any additional information below.
After reinstalling IOS55 everything works correctly again.
Original issue reported on code.google.com by [email protected]
on 5 Dec 2011 at 7:15
What steps will reproduce the problem?
1. Run any loader (USB Loader GX, WiiFlow, CFG).
2. Try to load my HDD.
3. Timer runs out, HDD not loaded.
4. Got to plug and unplug the HDD, to make it work properly, everytime a loader
is trying to mount it.
What is the expected output? What do you see instead?
Mount external HDD automatically, instead I have to plug it and unplug it again.
What version of the product are you using? On what operating system?
cIOS d2x v9 rev49, on Modded Wii,HBC and loaders.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Nov 2012 at 5:52
The game Disney Universe is unable to save to the partial emu nand its just
telling that the save data is corrupt.
Original issue reported on code.google.com by [email protected]
on 7 Jan 2012 at 12:15
using D2X v8 beta + r1141 ULGX
Tested Metroid Prime 3 on the trilogy disk, slot 249/r56 (game settings block
ios reload on, anti 002 fix on, sneak video and disc patch enabled)
This worked with D2X v7 and ULGX 1133 last i checked.
Workaround
set block ios reload to auto/global in game settings and IOS to slot 250/base
57 and all 3 games boot fine
Original issue reported on code.google.com by [email protected]
on 30 Dec 2011 at 9:31
What steps will reproduce the problem?
Usbloader gx r1154MOD + d2x8 beta r42
Game will block after a few minutes.
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 3:55
I opened an issue with usbloader_gx and they seem to think it is not possible
with the existing d2x...
I thought I would open an issue over here to see if it is possible to get it
implemented.
Right now usbloader_gx supports the following situations:
Partial NandEmulation (for Wii Games) SaveData is redirected to EmuNand
Full NandEmulation (for Wii Games) Save data, Mii's and Config are redirected
to EmuNand
Partial NandChannelEmulation (for Wiiware/VC): Channels are launched from
EmuNand and save data is on the same emuNand
Full NandChannelEmulation (for Wiiware/VC): Channels are launched from EmuNand
and SaveData, Mii and Config are accessed from same EmuNand.
usbloader_gx also supports launching wiiware/VC installed on the real nand, but
there are no options for partial or full nand emulation.
I would like to make these options more flexible. For example, I would like to
be able to keep all my saves, mii's and config in my real nand and have all of
that utilized by Wii Games, Wiiware on RealNand and WiiWare on EmuNand.
Right now this is possible with the Mii's and the Config but not with the Saves
since Wiiware launched from Emunand always use save data on that same emunand.
Please see usbloader_gx issue here:
http://code.google.com/p/usbloader-gui/issues/detail?can=1&start=0&num=100&q=rep
orter%3Ageogolem&colspec=ID%20Type%20Status%20Priority%20Owner%20Summary&groupby
=&sort=&id=2126
Would this be possible?
Original issue reported on code.google.com by [email protected]
on 30 Jun 2012 at 3:35
I try run MotoHeroez from USBLoaderGX NANDChannel emulation, but every version
hang on startup when game create save position.
Using cIOS249[56]-d2x-v8-beta(r41)-[v65535], UsbLoaderGX r1148
Original issue reported on code.google.com by [email protected]
on 11 Jan 2012 at 7:48
What steps will reproduce the problem?
1. Run USBLoader GX or WiiFlow with IOS 249
2. Attempt to "install" a game from Wii DVD to USB Flash Drive
3.
What is the expected output? What do you see instead?
Expected result: a successful 100% "installation" of the game
Actual result: system locks up requiring a forced shutdown by holding the power
button until the led turns red, or unplugging the Wii
What version of the product are you using? On what operating system?
USBLoader GX 2.3 & 3.0 (official and beta builds)
WiiFlow Mod official release of r590 and betas up to r594 as released by Fix
for testing of Devolution support.
SM 4.3U and cIOS249 (tested with v6, v7 final, v8 final and v9 beta r47 & beta
r49
Please provide any additional information below.
The only way I can successfully "install" games is to use cIOS 250 instead of
249. I am using retail discs, and make certain there are no scuffs, scratches,
fingerprints, etc anywhere on the discs. I have tried NSMB Wii, Skyward Sword,
Super Mario All-Star Collection, Twilight Princess, and Metal Slug Collection.
Original issue reported on code.google.com by [email protected]
on 19 Jul 2012 at 12:49
What steps will reproduce the problem?
1. Set nand emulation to partial
2. Play "Kirby and the epic yarn"
What is the expected output? What do you see instead?
Expected: Game loads fine, savegames can be loaded
Instead: Game says "savegame file is corrupt"
What version of the product are you using? On what operating system?
German PAL version, d2x v7 base 56
Please provide any additional information below.
Works fine with same settings on d2x v6 base 56
Original issue reported on code.google.com by [email protected]
on 8 Dec 2011 at 7:12
What steps will reproduce the problem?
1. Start Skyward Sword
2. Get to the boss Tentalus
3. After the first attack the Wii input locks
What is the expected output? What do you see instead?
You should be able to give input (Wiimote, Wii power, reset, eject buttons).
The game continues to run, but you cannot reset or control it in any way other
than a hard reset.
What version of the product are you using? On what operating system?
D2X v9 r 49
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 26 Aug 2012 at 9:00
What steps will reproduce the problem?
1. Tested Wiiflow rev175, 205,221,222 and d2x v9beta
2. Emulated game saves = ON
3. Call of Duty : Black Ops (Zombies)
What is the expected output? What do you see instead?
The game starts and can get to the game lobby, where I see and 'ready up' with
other players. However, when the game starts to load (cartoon screen - Zzzzzt!)
it just stays like that with with circular loading icon spinning.
Normally if there was a network error at that point it would kick you back to
game lobby, but it just stays on that screen.
What version of the product are you using? On what operating system?
d2x v9 beta - Wiiflow - 4.3E (The game is NTSC)
Please provide any additional information below.
Going back to d2x v7/v8 and it works fine (can play the game online)
Can't try with Emulated save = OFF because real save is buggered, the game asks
for update (wrong region, would need to change shop channel?)
Didn't try other loaders, but couldn't get Club Penguin to go online either
with v9
Original issue reported on code.google.com by [email protected]
on 22 Mar 2012 at 4:35
What steps will reproduce the problem?
1. Install d2x9 beta
2. Install latest GX beta R1166
3. Run GX in channel mode
4. Route banner cache files to usb drive.
5. View Wii DVD games only
6. View Emunand channels only
What is the expected output? What do you see instead?
I expect to see all of the game banners. I do see most of the banners but there
are certain pages that stay completely blank. The banners will flash for a few
seconds but eventually go blank. I've tried different versions of of d2x and
different GX mods. I gave enough time for the cache files to be created
What version of the product are you using? On what operating system?
Currently using d2x9 beta but have also tried d2x8 final.Current GX version is
R1166 but I've also tried older versions that contain the channel mode.
Please provide any additional information below.
I notice the same problem if I'm viewing Emunand channels only. Some pages just
stay blank
Original issue reported on code.google.com by [email protected]
on 9 May 2012 at 1:48
What steps will reproduce the problem?
1. Start HBC
2. Load any d2x-cios based usb loader
What is the expected output? What do you see instead?
Usb loader starts and loads games. Usb loader stays at start screen.
What version of the product are you using? On what operating system?
d2x-cios v8 beta 41, cfg usb loader-070 (cios 249 based), WII 4.3U.
Please provide any additional information below.
if you try to start the usb loader based on hermes cios (222,223,224) it starts
and loads games just fine but cant use d2x cios once the usb loader is running.
Original issue reported on code.google.com by [email protected]
on 15 Jan 2012 at 3:28
If you try to start a disc game with enabled partial nandemu the very first
time (the game was never launched from original disc and not launched with
disabled nandemu from usbloader gx) it is resulting in a black screen.
So I have to start the game at least once with disabled nandemu (then the
discid is written to uid.sys?) and then I can enable the partial nandemu again
and the game is also working with the nand emulation.
I think that happens since daveboal disabled the uid.sys support for the
emunand.
Original issue reported on code.google.com by [email protected]
on 4 Jan 2012 at 5:26
What steps will reproduce the problem?
1. CFG_Loader USB (mod) v70r27
2. D2X v8 Final
3. Use Auto CIOS in cfg-loader
Okami hangs on initial loading screen. Have tried enabling various patches in
cfg-loader (country fix, force video mode etc), but none seem to work.
Original issue reported on code.google.com by [email protected]
on 8 Apr 2012 at 7:24
Singing games like "U-Sing 2" and "We Sing Deutsche Hits" (German PAL) have
serious sync problems through USB.
However those games works great through DVD and SD card. Hermes cIOS 224[57]
works great too.
The issue is systematical and easy to reproduce.
From my tests with U-Sing 2 the lag appears:
- with rev19, rev20, rev21 and all d2x (can't test lower revs since base 57 is required)
- through USB only
- with any USB device
- even if the watchdog is didabled
I suspect the lag appears in U-Sing 2 because the HDD is continuously accessed
while singing (the led never stops blinking).
Pretty sure it's a EHCI module issue.
In fact with the new experimental EHCI module the lag has almost disapperared,
but unfortunately that module is not stable yet.
Original issue reported on code.google.com by [email protected]
on 5 Dec 2011 at 6:40
What steps will reproduce the problem?
1. Using USB Loader GX or Configurable loader, load MKW.
2. Wii shows warning screen.
3. Black screen and Wii hangs.
What version of the product are you using? On what operating system?
* Using d2x-cios v7. Tried USB Loader GX latest version and an older one
(~1024). Also tried configurable loader v65 and v70).
Please provide any additional information below.
* MKW from disc works just fine. Disc was loaded to WBFS HDD with USB Loader
GX. Also, Wii has a mod chip. This used to work for me, but after updating
cIOS's and loaders, it no longer works. Other games work just fine.
Original issue reported on code.google.com by [email protected]
on 17 Jan 2012 at 5:44
WiiMod: works except for ATD function randomly gives DSI error but installing
wads, SM, dumping, all seem to work fine; you will get a Cannot get TMD ticket
error but it'll only show up 3 times before you get to the app itself. The TMD
ticket error will also appear when the app checks for IOS but will only show a
limited number of times before it goes back to app.
I'm using d2x7final IOS249[56] under neek2o on USB from bootmii nand dump.
Homebrew is loaded via Postloader3 on neek2o.
Original issue reported on code.google.com by [email protected]
on 5 Dec 2011 at 8:35
What steps will reproduce the problem?
1. Boot game from USB 1
2. Play for a bit
3. Game will freeze at any point, could be right after boot or awhile in.
What is the expected output? What do you see instead?
Game to work fine :P
What version of the product are you using? On what operating system?
v9 r49
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 14 Oct 2012 at 9:08
What steps will reproduce the problem?
1. Use d2x cIOS v8+ (base56)
2. Use Mighty Channel (or PostLoader) (USB NAND)
3. Run Cave Story
4. Game freezes when creating first savegame (works with s2x cIOS v7 base56)
What is the expected output? What do you see instead?
That the game creates the game data file and not freezes.
Please provide any additional information below.
There were some more games with the same issue.
Original issue reported on code.google.com by [email protected]
on 11 Jan 2012 at 4:37
What steps will reproduce the problem?
1. Start USB Loader GX or USB Loader
2. Select Rise of the Guardians
3. Screen will turn black and the wiimote will blink upon pressing any button
What is the expected output? What do you see instead?
The game will start - instead, I get a black screen and wiimote will no longer
works
What version of the product are you using? On what operating system?
USB Loader 3
Please provide any additional information below.
I have tried to update the cios from guides below:
http://www.se7ensins.com/forums/threads/updating-wii-cios-to-play-newer-wii-game
s.599458/
http://www.wiihacks.com/other-faq-guides-tutorials/88654-d2x-cios-installation-g
uide.html
http://www.wiihacks.com/other-faq-guides-tutorials/88654-d2x-cios-installation-g
uide.html
Issue persists.
Original issue reported on code.google.com by [email protected]
on 31 Dec 2012 at 3:25
What steps will reproduce the problem?
1. Install d2x-v8final on modded Wii.
2. Launch Castlevania Rebirth (or other rebirth game) from emulated NAND using
Mighty Channels, USB Loader GX, Postloader, etc.
3. Wait for Konami logo screen to fade out.
What is the expected output?
- Game proceeds to title screen.
What do you see instead?
- Wii freezes on a black screen. In order to recover, the Wii must go through a
hard power-cycle (hold power button for 5 seconds, or pull the plug).
What version of the product are you using?
- d2x-v8final installed via ModMii.
On what operating system?
- 4.3U.
Please provide any additional information below.
- This is apparently a well-known issue, but I thought it was worth documenting
in case anyone has anything else to say, or in case something is discovered in
the future.
Original issue reported on code.google.com by [email protected]
on 25 Apr 2012 at 3:21
What steps will reproduce the problem?
1. Loading USB Loader GX from HBC
2. Loading USB Loader GX from latest forwarder channel on SysMenu
What is the expected output? What do you see instead?
When mounting USB Port 1 on startup it takes roughly 2mins. When using v8final
this is a very quick process.
What version of the product are you using? On what operating system?
d2x v9 beta49 IOS249
Please provide any additional information below.
I have not tested any of the other IOS slots but this is a very noticeable
difference & the d2x v9 b49 was made using modmii.
Original issue reported on code.google.com by [email protected]
on 17 Jun 2012 at 1:23
this has nothing to do with the software but I almost made a huge mistake
trying to install a Vwii version on my Wii and i feel that the disclaimer under
"project home" "summary" should state the difference between the original and
Vwii versions.
I was confused for a while until i found a statement saying Vwii is for the
Wii-U and i assume that people less observant may not figure out this fact
since it is not obvious.
this is not a rant or complaint, I was just concerned.
Original issue reported on code.google.com by [email protected]
on 30 Dec 2012 at 10:53
Sorry for my English. It not my native language.
Problem this. I have last soft moded wii. I am using d2x cios v10 52 or d2x v8
and all game run normally. If I am use d2x v10 alt 53 or d2x v9 fix 49 I am see
in few games low fps(drop fps) in something areas. Example Resident Evil:
Darkside Chronicles, Call of Duty MW3 and other. It happen in GX Usb Loader and
Mod Usb Loader all version. I don't understand why.
Original issue reported on code.google.com by [email protected]
on 30 Dec 2012 at 4:09
SaveGameManagerGX: partial works; boots up the 1st time but Wii Motes become
unsynced; it will boot up to where you can see the saves and everything but
sometimes it will only boot up to the loading ios249.
I'm using d2x7final IOS249[56] under neek2o on USB from bootmii nand dump.
Homebrew is loaded via Postloader3 on neek2o.
Original issue reported on code.google.com by [email protected]
on 5 Dec 2011 at 8:32
What steps will reproduce the problem?
Launch wiiware under NAND emulation via the loaders: USB Loader GX 2.3 r1155,
postloader3 3.69.x
What is the expected output? What do you see instead?
Under d2x v8 (most) games start successfully. Under d2x v9 r47 none start (at
least none of the dozen or so I've tried). Failures differ based on launcher,
dsi exception under pl3, for example.
What version of the product are you using? On what operating system?
d2x v9 beta r47. Games launched under cIOS249[56].
Please provide any additional information below.
N/A.
Original issue reported on code.google.com by [email protected]
on 27 Mar 2012 at 10:06
What steps will reproduce the problem?
1. Load Paper Mario, Majora's Mask or Super Smash Bros., from emulated nand
(either full or partial emulation)
2. The game gets stuck at the "you will need the classic controller" screen
3. The Wii's power button has to be held down to force a shutdown
What is the expected output? What do you see instead?
Game expected to load completely like other VC N64 games
What version of the product are you using? On what operating system?
d2x v7 with bases 37, 38, 53, 55, 56, 57, 58, on Wii System Menu 4.3U
I tried loading the games with all the bases noted above and none worked.
I tested this with both WiiFlow and Mighty Channels.
I also tested a d3x v7 version compiled with the "rev17-like" feature enabled,
but the result was the same.
Please provide any additional information below.
Other N64 games load properly.
I've tested:
Super Mario 64: works
Mario Kart 64: works
Yoshi's Story: works
F-Zero X: works
Legend of Zelda - Ocarina of Time: works
Legend of Zelda - Majora's Mask: doesn't work
Paper Mario: doesn't work
Super Smash Bros.: doesn't work
The three games that don't load for me, work fine when installed on the Wii's
real nand.
I know this has been mentioned before, but wanted to make it an official entry.
Regards.
Original issue reported on code.google.com by [email protected]
on 9 Dec 2011 at 2:39
What steps will reproduce the problem?
1. USB loader gx 2.3 with cios d2x v7 base on ios56 v5661 installed
2. Load game on hdd formatted in wfbs with default setting
3.
What is the expected output? What do you see instead?
Game should start as any other one. But Sonic Colors show black screen
with Error 001.
What version of the product are you using? On what operating system?
Wii 4.2 NTSC softmod
Please provide any additional information below.
Restart the game with older cios (I used cios38rev17) and the game start
without problem (same loader version)
Original issue reported on code.google.com by [email protected]
on 11 Feb 2012 at 6:55
What steps will reproduce the problem?
- The game SIMS 3 fails to load after updating to D2X v7 FINAL
- SIMS 3 UK(PAL) version on a UK(PAL) console
I tried to load SIM 3 using 249 (56) on USB LOADERGX (4 different versions)
- Reverting back to D2X v7 Beta 1D get's it working on all versions of USB
LOADER again,
Has something in v7 FINAL broke it, or could it be something in USBLOADERGX not
like loading from the v7 FINAL ?
Original issue reported on code.google.com by [email protected]
on 27 Dec 2011 at 10:06
E aggiorna per bene sta pagina sfaticato!!! =P
Mettici almeno i download.
Cribbio.
Actar =P
Original issue reported on code.google.com by [email protected]
on 23 Sep 2011 at 1:49
I'm unable to connect to multiplayer with enabled emu nand (both full and
partial emu nand) with USB Loader GX R1148 and d2x cIOS v8.
If I start multiplayer it just tries to connect and disconnects immediatelly.
Original issue reported on code.google.com by [email protected]
on 9 Jan 2012 at 9:08
WiiXplorer: runs but gives extended black screen when 1st loading.
I'm using d2x7final IOS249[56] under neek2o on USB from bootmii nand dump.
Homebrew is loaded via Postloader3 on neek2o.
Original issue reported on code.google.com by [email protected]
on 5 Dec 2011 at 8:36
1. Load The Beatles : Rock Band with partial NAND emulation or full NAND
emulation (I tried with USB Loader GX 2.3 r1123)
2. The game tries to create a new savegame (if a game save already exists, goto
the in-game menu Options > Manage Data > Save Data)
3. The game is unable to save on emulated NAND, and there is an error message :
"Saving has failed for an unknown reason. Selected storage device is no longer
available"
Original issue reported on code.google.com by [email protected]
on 11 Dec 2011 at 9:30
What steps will reproduce the problem?
1. Try to start Midnight Pool WB7P from emulated NAND via Wiiflow or USB Loader
GX
What is the expected output? What do you see instead?
Game should load but freezes at the point were (I suppose)
the savegame is being loaded. Happens on the same spot regardless whether
Wiiflow or usb loader.
What version of the product are you using? On what operating system?
d2x r42 on a FW4.1 PAL System, open wiiflow mod v3.1 alpha r116, usb loader gx
r1154
Please provide any additional information below.
Tried different Nand backups (with and without savegame included), tried
different cios's, works best with cIOS249 base56. The game works in real NAND
or when started with uniiloader within sorg's emulated nand
Original issue reported on code.google.com by [email protected]
on 26 Feb 2012 at 8:32
Call of Duty Black Ops doesn't work when the cIOs that runs it is installed
under the following conditions:
Working IOS: 36
Version: d2x v8 (r42)
Install Slot: 249
IOS Base: 56
The two conditions that are questionable would be the Working IOS and the Base.
I'm also not sure If Black Ops os the only game affected by these conditions.
Original issue reported on code.google.com by [email protected]
on 2 Mar 2012 at 5:59
What steps will reproduce the problem?
1. Run GH5 with Full or Partial Emulated NAND
2. Download DLC (works fine)
3. In any of the song selection menus, scroll through songs
What is the expected output? What do you see instead?
Instead of consistently playing song previews, the system sometimes freezes
instead. All animation stops and the Wii remote gets stuck on. Must power down
by holding the power button on the Wii.
What version of the product are you using? On what operating system?
Happens with D2X V7 final, V8R41 and V8R42
Please provide any additional information below.
EmuNAND is on USB hard drive with significant amount of DLC.
Behavior is the same under CFG and WiiFlow.
Original issue reported on code.google.com by [email protected]
on 5 Mar 2012 at 9:20
What steps will reproduce the problem?
1. Plug in two devices into the Wii
2. Load USB Loader with support for two devices
What is the expected output? What do you see instead?
All games, however I only see the ones on the first drive
What version of the product are you using? On what operating system?
d2x v8-57
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 6 Oct 2012 at 11:35
What steps will reproduce the problem?
1. Try and start Excite Truck with no save on wii or EMU Nand
2. Black screen
3.
What is the expected output? What do you see instead?
Game start, but the wii goes black screen and needs a hard reset
What version of the product are you using? On what operating system?
d2x r41 Base 56, gx loader 1150
Please provide any additional information below.
Even extracting the game save to EMU nand and trying again resulted in a black
screen, turn off emu nand and the game works correctly. On d2x v7 final
extracting the save results in the game working correctly
Original issue reported on code.google.com by [email protected]
on 8 Feb 2012 at 7:35
What steps will reproduce the problem?
1. start loading
2.
3.
What is the expected output? What do you see instead?
black screen (CFG usb loader v70 mod r20)
green screen freeze (neogamma r9b56)
What version of the product are you using? On what operating system?
Wii korean, 4.2U, priiloader 0.7 mod236, cios d2x v7 final,ios updated)
Please provide any additional information below.
i can run all japan region game except this game
please help.. thanks you
Original issue reported on code.google.com by [email protected]
on 6 Mar 2012 at 2:59
Apps using cios load slower than previous versions.
apps: savegame manager gx, wii xplorer
Original issue reported on code.google.com by [email protected]
on 9 Jan 2012 at 7:14
What steps will reproduce the problem?
1. Launch "Build-A-Bear Workshop: Friendship Valley" with full emu nand. The
game boots, game save is created and you can play.
2. Quit and relaunch the game. You get a message about corrupted save file.
Original issue reported on code.google.com by [email protected]
on 27 Jan 2012 at 10:13
1. USB Loader GX with partial or full emulation, game run from USB
1.1. On first run it creates the save
1.2. On second run it says that the save is corrupted and advises me to delete
the save
2. USB Loader GX without savegame emulation, game run from USB
2.1. It works on every run
I have extracted the save from real NAND(from the first save) and compared it
to the save inside emulated NAND and they are identical
Original issue reported on code.google.com by [email protected]
on 9 Mar 2012 at 3:14
Just an inversion of content id
<content id="0x3" /> instead of <content id="0x12" />
<content id="0x12" module="EHCI" tmdmoduleid="3"/> instead of <content
id="0x3" module="EHCI" tmdmoduleid="3"/>
Original issue reported on code.google.com by [email protected]
on 17 Apr 2012 at 12:45
What steps will reproduce the problem?
A-With USB Loader GX
1-Install Mario Golf 64, SMB3 & International Karate with Wad Manager 1.8 to
RealNAND
2-Dump RealNAND to SD with ULGX <device>:\NAND
3-Try to play MG64, SMB3 & International Karate, both works excelent
4-Install SMB1, SMB2 and Family Table Tennis with ULGX to EmuNAND
5-Try to play new installed games
================================================================================
=====
6-Black Screen and return to HomebrewChannel
B-With Mighty Channel
1-Select RealNAND, all Works
2-Try with EmuNAND (SD/USB)
=============================
3-Error -101
I have the same problem with all USB (ULGX and Dumped NAND), I tried to
install with ShowmiiWads, Also I downladed a new
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
System Menu 4.3U with d2x v7 with base 37 on 249 and base 56 on 250. Also all
Hermes 5.1 cIOS and IOS 36 patched
Tested Games
Super Mario Bros 1, 2 ,2J,3
Mario Bros
Dr Mario RX
Mario Golf 64
Super Smash Bros
Sonic 4
Family Table Tennis
Excite Bike
Yoshi Story
Family Table Tennis
Karate International
Original issue reported on code.google.com by [email protected]
on 4 Jan 2012 at 9:20
In the newest dx2 installer there is only the option to install the v6.
In the readme for v9, it is mentioned as one of the two ways to install
it. Does it install v9 even though it says v6 (when having the v9 placed
in the apps folder)?
Original issue reported on code.google.com by [email protected]
on 17 Sep 2012 at 11:15
What steps will reproduce the problem?
(Unsure)
What is the expected output? What do you see instead?
1. Expected: Game loads
2. Black screen, wii mote loses sync
What version of the product are you using? On what operating system?
Ver. 4.2U
Please provide any additional information below.
These problems started when I attempted to upgrade from older IOS's to the D2X
Cios v7. I'm not quite sure how to reproduce the problem. Today I tried to
install a wad (like I would normally do), but when I start the game it goes to
a black screen and turns off my wii mote.
I'd be very grateful to those who can help me with this problem.
Original issue reported on code.google.com by [email protected]
on 10 Feb 2012 at 7:40
will it ever be possible to load and use at the same time, usb camera games
from a hdd (ios58)
like your shape / racket and etc
Original issue reported on code.google.com by [email protected]
on 9 Dec 2011 at 5:05
winzip will not open says its it doesnt appear to be a valid archive?
what do i do?
thanks
Original issue reported on code.google.com by [email protected]
on 12 May 2012 at 11:13
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.