Zones Unstable about eagle2kicad HOT 6 CLOSED

I did a little bit of work in regard to this. The zones do appear to be stable. Also all contacts are sound. However it does not seem to support overlapping zones on same layer. Might be a KiCad Issue since syntax seems proper. If you give me your mail, i'll send it over.

from eagle2kicad.

You can send it to trump 211 dev (at) Gmail (dot) com... no spaces.

Also if I might ask, how are you running this? I can run it with eclipse
but I have been unable to find a way to run it by just calling it from the
command line
On Jul 8, 2012 6:47 PM, "magtux" <
[email protected]>
wrote:

I did a little bit of work in regard to this. The zones do appear to be
stable. Also all contacts are sound. However it does not seem to support
overlapping zones on same layer. Might be a KiCad Issue since syntax seems
proper. If you give me your mail, i'll send it over.

---

Reply to this email directly or view it on GitHub:
#1 (comment)

from eagle2kicad.

Yeah I will send it over now. I am using the python IDLE GUI. The barebones one. I also changed the path so that you dont need to put it in the same directory

from eagle2kicad.

You changed the system path or the python path? Do you by any chance know
if there is a way that this can be done programatically from within the
script?

By the way thanks for the help! I haven't had much time to put towards this
project in the past few months.
On Jul 8, 2012 7:09 PM, "magtux" <
[email protected]>
wrote:

Yeah I will send it over now. I am using the python IDLE GUI. The
barebones one. I also changed the path so that you dont need to put it in
the same directory

---

Reply to this email directly or view it on GitHub:
#1 (comment)

from eagle2kicad.

system.os.path. I changed it in the script. using sys.os.path

from eagle2kicad.

fixed by magtux in d2dbd57

from eagle2kicad.