This repository contains bootloader for stm32f1xx microcontrollers. It works for stm32f103ret6, but you can simply adopt it to any MCU supporting STM32 HAL library with USB and SD-card
License: BSD 2-Clause "Simplified" License
seems don't like any SDs, like a SD 128MiB or 8GiB
[417887.507276] usb 2-5: new full-speed USB device number 122 using xhci_hcd
[417887.648330] usb 2-5: New USB device found, idVendor=0483, idProduct=572a, bcdDevice= 2.00
[417887.648333] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[417887.648335] usb 2-5: Product: Caustic bootloader
[417887.648336] usb 2-5: Manufacturer: Caustic LTS
[417887.648338] usb 2-5: SerialNumber: 00000000001A
[417887.649087] usb-storage 2-5:1.0: USB Mass Storage device detected
[417887.649209] scsi host14: usb-storage 2-5:1.0
[417888.674385] scsi 14:0:0:0: Direct-Access STM Product 0.01 PQ: 0 ANSI: 2
[417888.674740] sd 14:0:0:0: Attached scsi generic sg8 type 0
[417888.674952] sd 14:0:0:0: [sdf] Very big device. Trying to use READ CAPACITY(16).
[417888.675347] sd 14:0:0:0: [sdf] Using 0xffffffff as device size
[417888.675353] sd 14:0:0:0: [sdf] 4294967296 512-byte logical blocks: (2.20 TB/2.00 TiB)
[417888.675497] sd 14:0:0:0: [sdf] Write Protect is off
[417888.675500] sd 14:0:0:0: [sdf] Mode Sense: 00 00 00 00
[417888.675660] sd 14:0:0:0: [sdf] Asking for cache data failed
[417888.675664] sd 14:0:0:0: [sdf] Assuming drive cache: write through
[417888.676271] sd 14:0:0:0: [sdf] Very big device. Trying to use READ CAPACITY(16).
[417888.676704] sd 14:0:0:0: [sdf] Using 0xffffffff as device size
[417888.677477] sd 14:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[417888.677480] sd 14:0:0:0: [sdf] tag#0 Sense Key : Illegal Request [current]
[417888.677483] sd 14:0:0:0: [sdf] tag#0 Add. Sense: Invalid command operation code
[417888.677485] sd 14:0:0:0: [sdf] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[417888.677489] blk_update_request: critical target error, dev sdf, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[417888.677494] Buffer I/O error on dev sdf, logical block 0, async page read
[417888.677870] sd 14:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[417888.677873] sd 14:0:0:0: [sdf] tag#0 Sense Key : Illegal Request [current]
[417888.677875] sd 14:0:0:0: [sdf] tag#0 Add. Sense: Invalid command operation code
[417888.677877] sd 14:0:0:0: [sdf] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[417888.677879] blk_update_request: critical target error, dev sdf, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[417888.677883] Buffer I/O error on dev sdf, logical block 0, async page read
[417888.677893] ldm_validate_partition_table(): Disk read failed.
[417888.678269] sd 14:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[417888.678271] sd 14:0:0:0: [sdf] tag#0 Sense Key : Illegal Request [current]
[417888.678274] sd 14:0:0:0: [sdf] tag#0 Add. Sense: Invalid command operation code
[417888.678276] sd 14:0:0:0: [sdf] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[417888.678279] blk_update_request: critical target error, dev sdf, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[417888.678281] Buffer I/O error on dev sdf, logical block 0, async page read
[417888.678675] sd 14:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[417888.678677] sd 14:0:0:0: [sdf] tag#0 Sense Key : Illegal Request [current]
[417888.678680] sd 14:0:0:0: [sdf] tag#0 Add. Sense: Invalid command operation code
[417888.678681] sd 14:0:0:0: [sdf] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[417888.678684] blk_update_request: critical target error, dev sdf, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[417888.678686] Buffer I/O error on dev sdf, logical block 0, async page read
[417888.679048] sd 14:0:0:0: [sdf] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[417888.679053] sd 14:0:0:0: [sdf] tag#0 Sense Key : Illegal Request [current]
[417888.679056] sd 14:0:0:0: [sdf] tag#0 Add. Sense: Invalid command operation code
[417888.679060] sd 14:0:0:0: [sdf] tag#0 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[417888.679067] blk_update_request: critical target error, dev sdf, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
[417888.679072] Buffer I/O error on dev sdf, logical block 0, async page read
[417888.679080] sdf: unable to read partition table
Hi
Archlinux
arm-none-eabi 9.2.0
cmake 3.15.5
when build the project (with little fix for build with folders with contains spaces) get a .bin file with 510KiB of size
and the generated CMakeCache.txt show a strange findings
uses the normal (PC) GCC/foo
how to fix it?
greetings
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
Django
The Web framework for perfectionists with deadlines.
Laravel
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft
Open source projects and samples from Microsoft.
Google
Google ❤️ Open Source for everyone.
Alibaba
Alibaba Open Source for everyone
D3
Data-Driven Documents codes.
Tencent
China tencent open source team.