Arduino:

• Click "File" in the upper left corner -> Preferences -> Additional Development >Board Manager URL -> Enter the URL in the input box. (ESP32S3 is a new chip, and the SDK version needs to be version 2.0.3 or above) https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
• Click OK and the software will be installed by itself. After installation, restart the Arduino IDE software.
• Search for ESP32 in Tools->Board Manager and install ESP32-Arduino SDK
• Copy all files in the lib folder to \Arduino\libraries
• Select the settings as shown. Note that the FLASH size partition and size may be modified depending on the board.

PlatfromIO:

• PlatformIO plug-in installation: Click on the extension on the left column -> search platformIO -> install the first plug-in
• Click Platforms -> Embedded -> search Espressif 32 in the input box -> select the corresponding firmware installation

ESP-IDF:

• The installation method is also inconsistent depending on the system, it is recommended to refer to the official manual for installation

Micropython:

• tft_config.py is already built into the firmware. The examples in the examples directory can be used directly.
• For detailed function query, please refer to the following link.
• [Micropython doc]

• The program can be written normally, but there is still no display after writing
  1. There are factory test files in the firmware folder, which can be flashed into the board to check whether the board is normal. If there is still no display, then it can be judged that there is a problem with the board or the screen
  2. Delete the <TFT_eSPI> in the libraries, and replace the <TFT_eSPI> in the folder of the main page to the libraries directory
  3. When opening the Arduino IDE, it prompts whether to upgrade the library, please choose not to upgrade, otherwise it will overwrite the configuration of the <TFT_eSPI> display