This is a Python-like language compiler that can be used to program the Ozobot bit robot. None of this would have been possible without this

Below is a description of the given Python-like language which due to using the Python parser is a subset of Python with some added builtin methods to control the Ozobot bit with.

8 color constants marking the 8 different colors Ozobot can undestand: BLACK, WHITE, GREEN, RED, BLUE, YELLOW, CYAN and MAGENTA

4 direction constants used with the there_is_way(direction) and pick_direction(direction) functions described under line navigation: STRAIGHT, LEFT, RIGHT and BACK

3 termination constants used by the terminate(mode) function: OFF, FOLLOW and IDLE

Only integer value in the range -127 to 127 and boolean values True and False are supported

Assigning variables is standard e.g x = 5. Multiple variable assignment is also possible e.g x = y = 5 sets x and y to 5.

5 arithmetic operations are supprted: +, -, *, / and %

There are also 2 mathematical functions: random(low, high) - generate a random value wihtin the given range abs(value) - absolute value of the given parameter

There are 3 built in functions to control the movement of the robot outside of line navigation:

move(distance, speed) - move forward by given distance (mm) and speed (mm/s). rotate(angle, speed) - rotate by given angle (degrees) and speed y (mm/s). wheels(left, right) - set the left and right wheel speeds (mm/s).

Stopping the robot is just wheels(0, 0)

Reading the surface color below the robot is get_surface_color()

There are 4 built in functions to control the robot on line navigation:

follow_line_to_intersect_or_end() - follows a line to intersectsion or line end move_straight_until_line(speed) - move forward at a given speed (mm/s) until a line is found there_is_way(direction) - checks if there is a way(line) in the given direction. pick_direction(direction) - picks a given direction at an intersection.

It is also possible to set and read the line following speed: set_line_speed(speed) - sets the line following speed to the given value get_line_speed() - gets the current line following speed

There is also get_intersect_or_line_end_color() which is similar to get_surface_color(), but is specifically meant for reading the color of the line the robot is navigating.

color(red, green, blue) - sets the top led color by the given red, green and blue values.

Turning the LED off is simply color(0, 0, 0)

wait(seconds, centiseconds) - waits for the given time terminate(mode) - end program excecution on leave leave the robot in one of three modes: off, line following or idle. If this function is not called at the end of the programm a terminate(OFF) is implicitly added by the compiler at the end of the program.

Standard Python if and else blocks are supported but the elif keyword is not. Also the standard Python boolean operations and, or and not and comparison operators <, >, ==, <=, >= and != are supported.

Only the standard while block is supported.

It is possible to create functions wihtout parameters and return values with the standard def keyword. Functions do not have their own scope and have to be declared before being called.

See compilerTest.py or use the Thonny plugin

I also created a thonny plugin which can be found here