cosmii02 / racingdsx Goto Github PK

View Code? Open in Web Editor NEW

115.0 6.0 17.0 174.37 MB

License: GNU General Public License v3.0

C# 100.00%

dsx dualsense forza-horizon-5

racingdsx's Introduction

💛Does not work with DSX V3 as it doesn't have a udp interface (ping pali about it for cookies)💛

Setting up DiRT Rally 1 / 2 for UDP Connection:

Go to C:\Users\<USER>\Documents\My Games\DiRT Rally X.0\hardwaresettings;
Open hardware_settings_config file with your favorite text editor;

Find for udp tag and configure as shown below:

<motion_platform>
     ...
     <udp enabled="true" extradata="3" ip="127.0.0.1" port="5300" delay="1" />
     ...
</motion_platform>

enabled = true
extradata = 3
port = 5300

🔺🔺 Note for Forza Horizon 4 and Forza Motorsport 7 (THIS IS REQUIRED FOR IT TO WORK) 🔺🔺

Install Window 8 AppContainer Loopback Utility
Start the utility (if it shows a message about orphan sid, you can safely ignore it)
Make sure that Forza Horizon 4 / Motorsport 7 are checked
Save changes

Step by step instructions for Forza Horizon 5:

Download latest version of RacingDSX from releases https://github.com/cosmii02/RacingDSX/releases
extract the zip file to a folder (For example desktop)
Run RacingDSX exe
allow firewall prompts if they show up
Open DSX
Run forza horizon 5
Go to settings and enable DATA OUT and set ip to 127.0.0.1 and DATA OUT IP PORT to 5300
In DSX make sure UDP is enabled, go to settings, click controller and then click networking. UDP has to be enabled and must be listening to port 6969

Note for Forza Motorsport 7

Launch the game and head to the HUD options menu
Set Data Out to ON
Set Data Out IP Address to 127.0.0.1 (localhost)
Set Data Out IP Port to 5300
Set Data Out Packet Format to CAR DASH

Thanks and Credits

DualSenseX

Forza-Telemetry

patmagauran

racingdsx's People

Contributors

Stargazers

Watchers

Forkers

testein4 sinwon gdsawa lurn0t reformagg harrison125582 carlosatualtech tokisakii jorgvdm jmwangde3 kapustis jay-dj-lin zchenak cire-cire-cire anchit1729 patmagauran itisyecatu

racingdsx's Issues

doesn't work

I tried to do it according to the instructions, but it doesn't work.
Forza is not shown in "Window 8 AppContainer Loopback" Utility
I did everything else according to the instructions, registered the ip and port, even opened them in the firewall.
In DSX, I also checked UDP in the settings. In DSX writes the red UDP status so it should be?

Doesn't work at all

Hi! I have tried it to enable in many ways but it does not work at all. My Forza only works with Xbox emulation. I dont understand what am I doing wrong. There is no any video guidance I can use. I have checked 100 times ports numbers, all the settings to be matched the ones mentioned in the text guide. Nothing is working. Could you please help me with the issue I have? I think it comes from the fact that I am emulating Xbox controller. But when I change to dualshock it stops working at all. Using Xbox emulation, I dont have even rumble vibrations. The only way to get it is connecting solely by steam app. Could you please tell me what am I doing wrong?

Not working on FH5

I quadruple checked everything, data out is enabled, the IP is set to 127.0.0.1, port 5300, UDP is enabled in DSX, port 6969, DSX works by itself, as in enabling any trigger modes work, so no clue what the issue is, I tried the other ForzaDSX and that doesn't seem to be working either, both programs say they are fully connected to the game but the triggers are just normal, no resistance or anything

Version 0.55 Flashback

Version 0.55, I can't open it, the CMD window recedes in seconds after double-clicking

Version Windows 11 Professional
Version 22H2
Installation date 2022/11/17
OS Version 22621.1848
Experience Windows Feature Experience Pack 1000.22642.1000.0

[Question] Can i get ban in FH5 if i'll use this mod in multiplayer?

Does not work

I don't know how else to explain it, I've followed the tutorial to the letter, which isn't at all complex, and it has no effect, nothing happens, my dualsense continues to work as it did without your module...

Forza 5
Dualsense
Windows 11
DualSenseX (paid steam version)

Let me know if you need anything else...

Thanks

adaptive triggers doesn`t work

I'm trying to use adaptive triggers but it does not work.
In the bottom show "DSX connection" and "Forza connection", both green, but not show the CMD

Vibration with Adaptive triggers

Is there any way to get both vibration and active triggers while playing?

Would love to use this for more immersive experience

Cannot run application.

Recording.2024-01-08.104718.mp4

When i try to run the application, nothing happens. Windows 11

Linux compatibility?

Hi, does this work with linux or the steam deck?

Both this mod & DSX AudioHaptics enabled ?

Hi there, 1st & foremost thanks for a great mod, working like a charm right out the box ! 👍
Just 1 downside, seeing the "settings can't be changed while UDP is active" message in DSX, & the Audio Haptics toggle greyed out on OFF, I take it I can't have both this mod & AH enabled ?
Anyway again, gr8 work, amazing feeling on the triggers, superbly customizable with the new UI !

not vibrating in off-road anymore

If I remember correctly, in forza horizon 4 the controller used to vibrate in off-road or grass.
But suddenly it stopped.
Has anyone sensed that too?
Also, I think the controller should vibrate when you hit a car, a tree or a house, but nothing happens

DSX 3

Does this useful utility support DSX version 3? I tried it, it didn't work for me, after switching to 2 the adaptive triggers started working.

Some modification to v 0.5

cant reset to default settings in v0.5 we need this please, also we need to get the trigger for brake to be like machine gun trigger as the ABS do this in real pedal

ForzaDSX expecting "C:\temp\DualSenseX\DualSenseX_PortNumber.txt" to exist, but it doesn't

When attempting to use ForzaDSX with a fresh install of DSX via Steam (never installed previously), it fails to load due to the file C:\temp\DualSenseX\DualSenseX_PortNumber.txt missing. This results in a red status for UDP in DSX and no adaptive trigger feedback in Forza 5.

I fixed this by manually creating the C:\temp\DualSenseX\ directories and copying the DualSenseX_PortNumber.txt that exists in the DSX install folder into it. Restarting DSX, ForzaDSX, and Forza 5 afterward resulted in the mod working beautifully.

I'm not sure how to best handle this (c# is not in my repertoire atm), but I found the path hard coded here:
https://github.com/cosmii02/ForzaDSX/blob/d29ac2ec2b618d6f7336a830fd780b3bfe42de4b/ForzaDSXWorker.cs#L425 Maybe it can be set in the config file or it can find the DSX install and point there automatically?

Forza Horizon 4

I can't find Forza Horizon 4 in the lookback.
Just like in the pictures.

Forza4 dosen't work

I follow the steps but udp still shows red
And i didn't found forza4 in the loopback utility

left trigger

The left trigger key is too heavy. Adjusting any value in the settings will directly disable the plugin

why we need to change our ip in the game?

if we do not change, this mode can not use?

Version 0.57 doesn't work

Downloaded the archive did everything as in the instructions, first start ForzaDSX, then DSX and so on, assigned ports, DSX listens to UDP port, but no feedback to the kurki is not observed, only the usual vibration from FH5. Version 0.56 also does not work, I do not know what could be the problem....

ForzaDSX not recognising FM8

I did everything in the description but forzaDSX only recognizes DSX but not FM8. Im playing on steam.

Forza Motorsport Support?

Hello,

I've attempted to set this up with Forza Motorsport (8) -- by all accounts I would think it would work since the telemetry output is configured the same as FH5 and FM7, however I'm unable to get it to work. The new Motorsport doesn't show up in the Loopback util, which could be part of the problem. The connection status for Forza is always red, so it seems like there's some sort of disconnect between the game and the utility. I'll keep trying to get this to work but was wondering if there is any "official" support yet.

Thanks! Great little app.

whenever i press a button on fh5, it just switches back to my keyboard and it only shows buttons for a split second

Forza 4 doesn't work

The mod doesn't work with Forza 4.
No idea why

Changing any value does not change anything

If you change the intensity of the right trigger effect by at least 99, then it stops working altogether. The rest of the parameters have no effect. Triger finished off in the finger like crazy. Feels like it's going to fly off at the next turn

Button prompts glitch

The button prompts are glitching between Keyboard/Mouse Controls and Xbox buttons

[Question] [Suggestion] xCloud

Would it be possible to add suport to it by using xCloud on either browser or Xbox app?

Forza 5 doesn't work adaptive trigers

hello everyone, I did everything to connect adaptive triggers, opened all ports, prescribed everything, but they do not work in forza 5, UDP is always red, although everything works well in cyberpunk, can someone help me find the reason?
Forza 5
Dualsense contoler
Windows 11
DualSenseX (paid steam version) v 2.5

New function need: Add translation file support

hi, i am a Chinese player who play forza5, and i use DSX and ForzaDSX when play games. But unlucky my english is so poor, i want to know how change trigger settings, I hope you can add translate file(like tips)and i try to know what it is then help translate, thanks!