copro / yi-hack-allwinner Goto Github PK

yi-hack-Allwinner is a modification of the firmware for the Allwinner-based Yi Camera platform.

• Table of Contents
• Installation
• Update Procedure
• Online Update Procedure
• Contributing
• Features
• Performance
• Supported cameras
• Is my cam supported?
• Build your own firmware
• License
• Disclaimer
• Donation

1. Check if your cam is supported in the "Supported cameras" section and note the file prefix.
2. Format an SD Card as FAT32. It's recommended to format the card in the camera using the camera's native format function. If the card is already formatted, remove all the files.
3. Download the latest release from the Releases page based on the file prefix.
4. Extract the contents of the archive to the root of your SD card.
5. Insert the SD Card and reboot the camera.
6. Wait for the camera to update. It will reboot a couple of times as the camera is rooted and the new firmware is applied. It can take up to an hour to update. Once the light is solid blue for at least a minute it is complete.

1. Go to the "Motion Events" web page
2. Remove all unnecessary video files
3. Go to the "Maintenance" web page
4. Check if a new release is available
5. Click "Upgrade Firmware"
6. Wait for cam reboot

If you don't delete mp4 files, the upgrade procedure will take a long time.

See CONTRIBUTING

This custom firmware contains features replicated from the yi-hack-MStar project and similar to the yi-hack-v4 project.

• FEATURES
  • RTSP server - allows a RTSP stream of the video (high and/or low resolution) and audio (thanks to @PieVo for the work on MStar platform).
    • rtsp://IP-CAM/ch0_0.h264 (high res)
    • rtsp://IP-CAM/ch0_1.h264 (low res)
    • rtsp://IP-CAM/ch0_2.h264 (only audio)
  • ONVIF server (with support for h264 stream, snapshot, ptz, presets and WS-Discovery) - standardized interfaces for IP cameras.
  • Snapshot service - allows to get a jpg with a web request.
    • http://IP-CAM:8080/cgi-bin/snapshot.sh?res=low&watermark=yes (select resolution: low or high, and watermark: yes or no)
    • http://IP-CAM:8080/cgi-bin/snapshot.sh (default high without watermark)
  • MQTT - Motion detection and baby crying detection through mqtt protocol.
  • Web server - web configutation interface (port 8080).
  • SSH server - dropbear.
  • Telnet server - busybox.
  • FTP server.
  • FTP push: export mp4 video to an FTP server (thanks to @Catfriend1).
  • Authentication for HTTP, RTSP and ONVIF server.
  • Proxychains-ng - Disabled by default. Useful if the camera is region locked.
  • The possibility to change some camera settings (copied from official app):
    • camera on/off
    • video saving mode
    • detection sensitivity
    • AI human detection (thanks to @BenjaminFaal)
    • baby crying detection
    • status led
    • ir led
    • rotate
  • Management of motion detect events and videos through a web page.
  • View recorded video through a web page (thanks to @BenjaminFaal)
  • PTZ support through a web page (if the cam supports it).
  • The possibility to disable all the cloud features.
  • Swap File on SD
  • Online firmware upgrade
  • Load/save/reset configuration

The performance of the cam is not so good (CPU, RAM, etc...). Low ram is the bigger problem. If you enable all the services you may have some problems. For example, enabling both rtsp streams is not recommended. Disable cloud is recommended to save resources. If you notice problems and you have a SD to waste, try to enable swap file.

Currently this project supports only the following cameras:

USE AT YOUR OWN RISK.

Do not try to use a fw on an unlisted model

Do not try to force the fw loading renaming the files

If you want to know if your cam is supported, please check the serial number (first 4 letters) and the firmware version. If both numbers appear in the same row in the table above, your cam is supported. If not, check the other projects related to Yi cams:

• https://github.com/TheCrypt0/yi-hack-v4 and previous
• https://github.com/roleoroleo/yi-hack-MStar
• https://github.com/roleoroleo/yi-hack-Allwinner-v2

If you want to build your own firmware, clone this git and compile using a linux machine. Quick explanation:

1. Download and install the SDK as described here
2. clone this git: git clone https://github.com/roleoroleo/yi-hack-Allwinner
3. Init modules: git submodule update --init
4. Compile: ./scripts/compile.sh
5. Pack the firmware: ./scripts/pack_fw.all.sh

MIT

NOBODY BUT YOU IS RESPONSIBLE FOR ANY USE OR DAMAGE THIS SOFTWARE MAY CAUSE. THIS IS INTENDED FOR EDUCATIONAL PURPOSES ONLY. USE AT YOUR OWN RISK.

If you like this project, you can buy Roleo a beer :)