- ๐ Hi, Iโm @HEN3DRIK
- ๐ Iโm interested in 3DPrinting and Electroforming/Electroplating
- ๐ซ How to reach me
- Youtube https://www.youtube.com/c/v0g3l
- Twitter https://twitter.com/v0g3l
Nice to have you here. In this repository I keep the files that are necessary for the BeadSorter. Also there will be documentation about the needed electronics and software. I will update this repo continuously.
These are Projects necessary for this beadsorter to work.
To simplify the printing process you can download these project in their respective folders in this repository.
Original Project by Linus Barth: BeadSort: Machine for sorting perler beads by LinusB - Thingiverse follow the process here.
Modified to skip aligner phase by RichA777 Bead Sorter modified to skip aligner phase by RichA777 - Thingiverse follow the process here.
You'll need electronic parts for this bead sorter. This is alist of what i used in this project. I belive some components can be substituted.
- 1x Miniature-DC-Gear Motor 15RPM: https://www.amazon.de/gp/product/B08591W5N8/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
- 2x LM2596S DC-DC: https://www.amazon.de/gp/product/B07YWLCTLK/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
- 1x A4988 Stepper Driver Module: https://www.amazon.de/gp/product/B07C2V9GWC/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
- 1x Nema 17 Stepper Bipolar 1A 16Ncm 42x20mm 4-Wires: https://www.amazon.de/dp/B06XVM38YW/ref=pe_27091401_487024491_TE_item
- 1x L298N Motor Drive Controller Board Module: https://www.amazon.de/gp/product/B07MY33PC9/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
- 1x Adafruit-Sensor TCS34725 RGB: https://www.amazon.de/gp/product/B00OKCRU5M/ref=ppx_yo_dt_b_asin_title_o09_s01?ie=UTF8&psc=1
- 1x Arduino Nano V3.0 Atmega328 CH340: https://www.amazon.de/gp/product/B01MS7DUEM/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
- 1x SG90 Micro Servo Motor 9G: https://www.amazon.de/gp/product/B07CYZSVKW/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1
- 1x 100ยตF Capacitor
- 1x Resistor matching LED
- 1x White LED
- 1x Photo Resistor 5mm
- 1x Push Button
- Wires
- PTFE Spray
I know, this isn't nice looking.
Once you copied the STL files from the reference project into their respective directory launch the script ExtractParts.bat (double click on it) in the STLs folder.
The table below refers to parts in the STLs/TO_PRINT folder.
Part | Quantity |
---|---|
0-hopper-seq-plate-4_holes_modified.stl | 1 |
0-hopper-seq-stopper.stl | 1 |
1-sequentializer-ilc-bottom.stl | 1 |
1-sequentializer-ilc-corner_for_higher_motor.stl | 4 |
1-sequentializer-ilc-top.stl | 1 |
1-sequentializer-motor-holder.stl | 1 |
3-analyzer-base.stl | 1 |
3-analyzer-entry-tube_modified.stl | 1 |
3-analyzer-exit-base.stl | 1 |
3-analyzer-exit-tube.stl | 1 |
3-analyzer-ilc-bottom.stl | 1 |
3-analyzer-ilc-corner.stl | 4 |
3-analyzer-ilc-top.stl | 1 |
3-analyzer-separation-arm.stl | 1 |
3-analyzer-servo-holder.stl | 1 |
3-analyzer-top-alignment.stl | 1 |
4_Stepper_shaft.stl | 1 |
4-dispatcher-ilc-bottom.stl | 1 |
4-dispatcher-ilc-corner.stl | 4 |
4-dispatcher-ilc-top.stl | 1 |
4-dispatcher-tube-alignment.stl | 1 |
4-dispatcher-tubehalf-1.stl | 1 |
4-dispatcher-tubehalf-2.stl | 1 |
5-outputs-ilc-corner.stl | 4 |
5-outputs-ilc-top.stl | 1 |
5-outputs-slide-1.stl | 4 |
5-outputs-slide-2.stl | 4 |
5-outputs-slide-3.stl | 4 |
Box_bottom.stl | 1 |
Box_lid.stl | 1 |
Box_top.stl | 1 |
holder_typeA.stl | 1 |
holder_Typeb.stl | 1 |
Hopper_Modified_Cleaned_up.stl | 1 |
Plate.stl | 1 |
ring_container.stl | 1 |
Sequencer_base_modified.stl | 1 |
Servo_base2.stl | 1 |
Stepper_shaft_ring.stl | 1 |
UM2_Sequencer_tube_modified_tighter_Higher_Motor.stl | 1 |
TOTAL | 61 |