Hi all,

Do you plan to support the new JetPack 4.2 for TX2? This new L4T 32.1 release comes with new linux kernel tegra version: 4.9 (the previous one was 4.4).

JetPack 4.2
NVIDIA L4T 32.1
Linux kernel version: 4.9

Thanks,

Hello, could this project carry out on TX1 platform?

I am attempting to get the century arks CA378 working with a recent release of jetpack (prefer 4.0, but 3.3 would be great) using the directions from this repository. The TX2 freezes during the boot phase (nvidia logo shown but nothing else) at the end of step 2.

I can see some recent activity on the nvidia developer forums regarding jetpack 3.2.1. Were you able to resolve this for more recent versions of jetpack? I am not an expert at linux drivers or kernel, but willing to help test if that is helpful.

Any chance the driver can have support for a Jetson Xavier (SOC type t194)?

Hey all, I have everything up and running, but I'm wondering if there is a way to set the OIS mode for this camera within a bash script?

Thanks.

Hi guys!
I'm testing this driver in the Jetson TX2 NVIDIA platform and it works
with the demo binaries you provide. But also, I'm interested in v4l2 stack so,
I'm testing it directly with latest qv4l2 version but I cannot achieve any
good image. Actually, here is what I got from the camera:

• 640x480@240fps: black image.
• 1920x1080@120fps: black image. Notice here I cannot reduce the framerate since
  driver is not providing other modes for this resolution.
• 3840x2156@30: partially black. Here, I can see some part of the image but not
  the entire of it.
• 4056x3040: partially striped and partially black image.

Note: Bypass mode is disabled to allow qv4l2 capture the images.

Please, can you help me with this?

I have attached some pictures of qv4l2 setup with their output pictures.

• 4056x3040 snapshot:
  
• 4056x3040 setup:
  
• 3840x2156 snapshot:
  
• 3840x2156 setup:
  

Thanks