This repository contains configuration to generate certificates that can be used by ChirpStack for securing gateway connections and the per-application MQTT integration connections:

• Generating a "common authority" for
  • Signing (client-)certificates
  • Validating (client-)certificates
• Server-certificate for the ChirpStack Gateway Bridge to use mTLS if configured with the Basics Station backend
• Server-certificate for the MQTT broker to allow mTLS based authentication and authorization for
  • Gateways connecting over MQTT (certificate per Gateway ID)
  • Per-application MQTT integrations (certificate per Application ID)

For generating the certificates, cfssl is used. Make sure you have this tool installed.

To modify the hosts using the set-hosts command you will need jq installed.

You can modify all certificate.json files at once with specific hosts with the make set-hosts command:

MQTT_BROKER_HOSTS=127.0.0.1,localhost,mqtt.example.com \
CHIRPSTACK_GATEWAY_BRIDGE_HOSTS=127.0.0.1,localhost,cgwb.example.com \
make set-hosts

The make set-hosts accepts the following environment variables:

• MQTT_BROKER_HOSTS: comma-separated list of hostnames for the MQTT broker
• CHIRPSTACK_GATEWAY_BRIDGE_HOSTS: comma-separated list of hostnames for the ChirpStack Gateway Bridge (Basics Station backend)

In case the environment variable is not specified, then it will fallback to 127.0.0.1,localhost.

Using Docker Compose, you can use the following command:

docker-compose run --rm \
    -e MQTT_BROKER_HOSTS="localhost,mqtt.example.com" \
    -e CHIRPSTACK_GATEWAY_BRIDGE_HOSTS="localhost,cgwb.example.com" \
    chirpstack-certificates make set-hosts

Simply run make to generate all certificates. All certificates will be written to the certs folder. See also the Makefile for all commands being executed.

You probably want to make changes to the certificate.json files under config. Please see https://cfssl.org for documentation about the cfssl usage.

An alternate way to generate the certificates that does not require to have the different dependencies installed is by using docker (you will need docker, of course).

docker-compose run --rm chirpstack-certificates make

This directory contains the CA certificate and private key that you must configure in the chirpstack.toml configuration, such that it can generate client-certificates for gateways and application integrations.

The CA certificate must also be configured in the MQTT broker and by the ChirpStack Gateway Bridge Basics Station backend (if used) to validate the client-certificate of connecting clients.

This directory contains the server-certificate and private key used by the ChirpStack Gateway Bridge Basics Station backend (if used).

This directory contains the server-certificate and private key used by the MQTT broker.

Note that the filenames in the example refer to the filenames as being used in the certs/ directory (not including the names of the directories).

The examples assume that you will copy the generated certificates to the appropriate directories, and that you will set the correct file-permissions.

To enable creating client-certificates for gateways through the web-interface, you must configure the [gateway] section in the chirpstack.toml configuration:

[gateway]
client_cert_lifetime="12months"
ca_cert="/etc/chirpstack/certs/ca.pem"
ca_key="/etc/chirpstack/certs/ca-key.pem"

To enable creating client-certificates for (per application) MQTT integrations, you must configure the [integration.mqtt.client] section in the chirpstack.toml configuration:

[integration.mqtt.client]
client_cert_lifetime="12months"
ca_cert="/etc/chirpstack/certs/ca.pem"
ca_key="/etc/chirpstack/certs/ca-key.pem"

To enable TLS and validating gateway client-certificates of incoming Basics Station connections, you must configure the [backend.basicstation] section in the chirpstack-gateway-bridge.toml configuration:

[backend.basic_station]
tls_cert="/etc/chirpstack-gateway-bridge/certs/basicstation.pem"
tls_key="/etc/chirpstack-gateway-bridge/certs/basicstation-key.pem"
ca_cert="/etc/chirpstack-gateway-bridge/certs/ca.pem"

To enable TLS and validating client-certificates of incoming MQTT connections (gateways and per-application MQTT integrations), you must configure a TLS listener. Example:

/etc/mosquitto/acl:

pattern readwrite +/gateway/%u/#
pattern readwrite application/%u/#

/etc/mosquitto/conf.d/listeners.conf:

per_listener_settings true

listener 1883 127.0.0.1
allow_anonymous true

listener 8883 0.0.0.0
cafile /etc/mosquitto/certs/ca.pem
certfile /etc/mosquitto/certs/mqtt-broker.pem
keyfile /etc/mosquitto/certs/mqtt-broker-key.pem
allow_anonymous false
require_certificate true
use_identity_as_username true
acl_file /etc/mosquitto/acl

For more information, please refer to the Mosquitto TLS configuration guide.