• Supports almost all ESP IDF services: timers, event loop, Wifi, Ethernet, HTTP client & server, MQTT, WS, NVS, OTA, etc.
• Implements the traits of embedded-svc
• Blocking and async mode for each service (async support where feasible)
• Re-exports esp-idf-hal and esp-idf-sys as esp_idf_svc::hal and esp_idf_svc::sys. You only need to depend on esp_idf_svc to get everything you need

You might want to also check out the ESP IDF Drivers wrappers, and the raw bindings to ESP IDF in the esp-idf-sys crate!

Follow the Prerequisites section in the esp-idf-template crate.

The examples could be built and flashed conveniently with cargo-espflash. To run e.g. wifi on an e.g. ESP32-C3: (Swap the Rust target and example name with the target corresponding for your ESP32 MCU and with the example you would like to build)

with cargo-espflash:

$ MCU=esp32c3 cargo espflash flash --target riscv32imc-esp-espidf --example wifi --monitor

Use the esp-idf-template project. Everything would be arranged and built for you automatically - no need to manually clone the ESP IDF repository.

For more information, check out:

• The Rust on ESP Book
• The ESP Embedded Training
• The esp-idf-template project
• The embedded-svc project
• The esp-idf-hal project
• The embedded-hal project
• The esp-idf-sys project
• The Rust for Xtensa toolchain
• The Rust-with-STD demo project