broy98 / pandroid Goto Github PK

What steps will reproduce the problem?
1. Launch browser app
2. Navigate to Google mobile home (http://www.google.com/m)

What is the expected output? What do you see instead?
The browser loads the page and some of the contents are shown. Right before the 
progress bar goes to 100% the browser crashes and returns to launcher.

What version of the product are you using? On what operating system?
pandroid L27.12.1-P2

Please provide any additional information below.
logcat:
W/dalvikvm( 1727): JNI WARNING: JNI method called with exception raised
W/dalvikvm( 1727):              in 
Landroid/webkit/JWebCoreJavaBridge;.sharedTimerFired ()V (NewLocalRef)
W/dalvikvm( 1727): Pending exception is:
I/dalvikvm( 1727): Ljava/lang/IllegalArgumentException;: provider=gps
I/dalvikvm( 1727):  at android.os.Parcel.readException(Parcel.java:1326)
I/dalvikvm( 1727):  at android.os.Parcel.readException(Parcel.java:1276)
I/dalvikvm( 1727):  at 
android.location.ILocationManager$Stub$Proxy.requestLocationUpdates(ILocationMan
ager.java:646)
I/dalvikvm( 1727):  at 
android.location.LocationManager._requestLocationUpdates(LocationManager.java:58
2)
I/dalvikvm( 1727):  at 
android.location.LocationManager.requestLocationUpdates(LocationManager.java:446
)
I/dalvikvm( 1727):  at 
android.webkit.GeolocationService.registerForLocationUpdates(GeolocationService.
java:162)
I/dalvikvm( 1727):  at 
android.webkit.GeolocationService.start(GeolocationService.java:66)
I/dalvikvm( 1727):  at 
android.webkit.JWebCoreJavaBridge.sharedTimerFired(Native Method)
I/dalvikvm( 1727):  at 
android.webkit.JWebCoreJavaBridge.fireSharedTimer(JWebCoreJavaBridge.java:91)
I/dalvikvm( 1727):  at 
android.webkit.JWebCoreJavaBridge.handleMessage(JWebCoreJavaBridge.java:108)
I/dalvikvm( 1727):  at android.os.Handler.dispatchMessage(Handler.java:99)
I/dalvikvm( 1727):  at android.os.Looper.loop(Looper.java:123)
I/dalvikvm( 1727):  at 
android.webkit.WebViewCore$WebCoreThread.run(WebViewCore.java:629)
I/dalvikvm( 1727):  at java.lang.Thread.run(Thread.java:1019)
I/dalvikvm( 1727): "WebViewCoreThread" prio=5 tid=12 NATIVE
I/dalvikvm( 1727):   | group="main" sCount=0 dsCount=0 obj=0x405b21d0 
self=0x316658
I/dalvikvm( 1727):   | sysTid=1740 nice=0 sched=0/0 cgrp=default handle=3237776
I/dalvikvm( 1727):   at 
android.webkit.JWebCoreJavaBridge.sharedTimerFired(Native Method)
I/dalvikvm( 1727):   at 
android.webkit.JWebCoreJavaBridge.fireSharedTimer(JWebCoreJavaBridge.java:91)
I/dalvikvm( 1727):   at 
android.webkit.JWebCoreJavaBridge.handleMessage(JWebCoreJavaBridge.java:108)
I/dalvikvm( 1727):   at android.os.Handler.dispatchMessage(Handler.java:99)
I/dalvikvm( 1727):   at android.os.Looper.loop(Looper.java:123)
I/dalvikvm( 1727):   at 
android.webkit.WebViewCore$WebCoreThread.run(WebViewCore.java:629)
I/dalvikvm( 1727):   at java.lang.Thread.run(Thread.java:1019)
I/dalvikvm( 1727): 
E/dalvikvm( 1727): VM aborting
I/ActivityManager( 1367): Process com.android.browser (pid 1727) has died.
E/InputDispatcher( 1367): channel '406f05f0 
com.android.browser/com.android.browser.BrowserActivity (server)' ~ Consumer 
closed input channel or an error occurred.  events=0x8
E/InputDispatcher( 1367): channel '406f05f0 
com.android.browser/com.android.browser.BrowserActivity (server)' ~ Channel is 
unrecoverably broken and will be disposed!
D/Zygote  ( 1309): Process 1727 terminated by signal (11)
E/InputDispatcher( 1367): channel '407807c0 
com.android.browser/com.android.browser.BrowserActivity (server)' ~ Consumer 
closed input channel or an error occurred.  events=0x8
E/InputDispatcher( 1367): channel '407807c0 
com.android.browser/com.android.browser.BrowserActivity (server)' ~ Channel is 
unrecoverably broken and will be disposed!
I/WindowManager( 1367): WINDOW DIED Window{406f05f0 
com.android.browser/com.android.browser.BrowserActivity paused=false}
I/WindowManager( 1367): WINDOW DIED Window{407807c0 
com.android.browser/com.android.browser.BrowserActivity paused=false}
W/WindowManager( 1367): Failed looking up window
W/WindowManager( 1367): java.lang.IllegalArgumentException: Requested window 
android.os.BinderProxy@406e85f0 does not exist
W/WindowManager( 1367):     at 
com.android.server.WindowManagerService.windowForClientLocked(WindowManagerServi
ce.java:8206)
W/WindowManager( 1367):     at 
com.android.server.WindowManagerService.windowForClientLocked(WindowManagerServi
ce.java:8197)
W/WindowManager( 1367):     at 
com.android.server.WindowManagerService$WindowState$DeathRecipient.binderDied(Wi
ndowManagerService.java:7056)
W/WindowManager( 1367):     at 
android.os.BinderProxy.sendDeathNotice(Binder.java:381)
W/WindowManager( 1367):     at dalvik.system.NativeStart.run(Native Method)
I/WindowManager( 1367): WIN DEATH: null
W/WindowManager( 1367): Failed looking up window
W/WindowManager( 1367): java.lang.IllegalArgumentException: Requested window 
android.os.BinderProxy@406d5520 does not exist
W/WindowManager( 1367):     at 
com.android.server.WindowManagerService.windowForClientLocked(WindowManagerServi
ce.java:8206)
W/WindowManager( 1367):     at 
com.android.server.WindowManagerService.windowForClientLocked(WindowManagerServi
ce.java:8197)
W/WindowManager( 1367):     at 
com.android.server.WindowManagerService$WindowState$DeathRecipient.binderDied(Wi
ndowManagerService.java:7056)
W/WindowManager( 1367):     at 
android.os.BinderProxy.sendDeathNotice(Binder.java:381)
W/WindowManager( 1367):     at dalvik.system.NativeStart.run(Native Method)
I/WindowManager( 1367): WIN DEATH: null
W/InputManagerService( 1367): Got RemoteException sending setActive(false) 
notification to pid 1727 uid 10036
I/ActivityManager( 1367): Displayed 
com.android.launcher/com.android.launcher2.Launcher: +100ms

When i am building Android Fs,my compilation stops with following error 
....
target thumb C++: libomxcameraadapter <= 
hardware/ti/omap3/camera-omap4/src/OMXCameraAdapter/OMXCameraAdapter.cpp
hardware/ti/omap3/camera-omap4/src/OMXCameraAdapter/OMXCameraAdapter.cpp: In 
member function 'virtual android::status_t 
android::OMXCameraAdapter::stopPreview()':
hardware/ti/omap3/camera-omap4/src/OMXCameraAdapter/OMXCameraAdapter.cpp:3614: 
error: 'DCC_PATH' was not declared in this scope
target thumb C: libpagemap <= system/extras/libpagemap/pm_kernel.c
target thumb C: libpagemap <= system/extras/libpagemap/pm_process.c
make: *** 
[out/target/product/pandaboard/obj/SHARED_LIBRARIES/libomxcameraadapter_intermed
iates/OMXCameraAdapter/OMXCameraAdapter.o] Error 1
make: *** Waiting for unfinished jobs....
...

I am using 
L27.12.1-P2 release
Host PC: 11.04 32 bit
I gave make TARGET_PRODUCT=pandaboard -j4 command building Android FS.

Please let me know how to resolve this.

BR,
J

What steps will reproduce the problem?
1. Boot the Pre-build Image 2.3 on PandaBoard A2.
2. In Serial port command, Input: netcfg
3. It shows: 
       ------------------------------------
       Cannot perform requested operation: Permission denied
       ------------------------------------

What is the expected output? What do you see instead?
    The following output is expected:
---------------------------------------
# netcfg
# lo       UP    127.0.0.1       255.0.0.0       0x00000049
  usb0     UP    0.0.0.0         0.0.0.0         0x00001043
  sit0     DOWN  0.0.0.0         0.0.0.0         0x00000080
  ip6tnl0  DOWN  0.0.0.0         0.0.0.0         0x00000080
  usb1     UP    10.127.109.146  255.255.255.0   0x00001043
---------------------------------------

  but I see
---------------------------------------
Cannot perform requested operation: Permission denied
---------------------------------------



What version of the product are you using? On what operating system?
PandaBoard A2, with L27.12.1-P2-pandroid_v2.tar.bz2 pre-build image in 
http://code.google.com/p/pandroid/downloads/list

Please provide any additional information below.

Not yet

What steps will reproduce the problem?
1. Connect a HDMI TO DVI cable to EIZO/NEO monitor , display goes blank. 
2. Board boots up
3. Also ADB is fine. 

What is the expected output? What do you see instead?
 Board successfully connected to the monitor and the Display is not blank.

What version of the product are you using? On what operating system?
Pandaboard Rev A3 . software -- L27.10.2-P1 .Ginger Bread

Please provide any additional information below.
I am never able to connect to the monitors with HDMI-DVI converter , I have 
tried with NEC and EIZO monitors. EDID data of EIZO attached here with, please 
help .

steps will reproduce the problem?
1.I have inserted usb camera from console through lsusb device is detected.
2.videodev.ko and uvcvideo.ko modules are present.
3. In /dev/ vide0 found.
4.swichted from console to GUI then open default camera application.

Expected output:
1./proc/bus/usb nothing is there.
2.camera application crashed.

I am using android-x86-2.2-generic.iso 


find logcat as attachment.

From the download page @ http://code.google.com/p/pandroid/downloads/list

uImage_DVI   2.7 MB
bf7c4242a6d6bd0e8ee58c256eb77adab421cb93
http://code.google.com/p/pandroid/downloads/detail?name=uImage_DVI&can=2&q=

uImage   2.7 MB
bf7c4242a6d6bd0e8ee58c256eb77adab421cb93
http://code.google.com/p/pandroid/downloads/detail?name=uImage&can=2&q=

I have tried over and over to get the fixed resolution of 1280x800
advertised to work with the uImage_DVI kernel, to no avail.  Both
kernels have the same checksum and file size according to the download
page, which suggests an uploading mixup.

What steps will reproduce the problem?
1. Load the file system
2. Home, Arrow keys etc. are not working at UI level
3. The key events are detected at kernel level

What is the expected output? What do you see instead?
Arrow keys can't be used to browse the apps. Tab, Enter and Alpha-numeric keys 
work.

Please use labels and text to provide additional information.

What steps will reproduce the problem?
1. Follow the link to build L27.10.2 Release, MLO, u-boot.bin, Image and Afs :: 
http://www.omapedia.org/wiki/PandaBoard_L27.10.2-P1_Release_Notes
2. OR, use prebuilt-in images and AFS released for L27.10.2  still the same 
problem exits 


What is the expected output? What do you see instead?
should work for Android basic apps, and should not crash


What version of the product are you using? On what operating system?
L27.10.2-P1 version latest updated and released by pandagroup


Please provide any additional information below.
http://omappedia.org/wiki/Android:_Working_with_pre-built_binaries
before working on latest label(L27.10.2) I have taken prebuilt fr L27.8.2 which 
works fine for Pandaboard 4430

Notes:
find the attachment for 
1. "EDID_info"
2. Prebuilt Crash info for "Crash of PreBuiltL27.10"
3. My built (MLO, u-boot.bin, Image and Afs) "MyBuilt_Crash_LogL27.10.2"

regards,
Naveen

What steps will reproduce the problem?
1. Enabling Ducati binaries, for hardware accelaration
2. Running my sample video application to play a video in a small window
3. video file is available on my SD card. Size of VideoView window is 100dp in 
height and width.

What is the expected output? What do you see instead?
I expected the video to be scaled to fit the window size I defined in my 
application.

What version of the product are you using? On what operating system?
PandaBoard_L27.12.1-P2_Release_Notes

Please provide any additional information below.

D/TIOverlay( 1424): mZorderUsage[0] = 0 needs to be assigned the
highest zOrder

I/TIOverlay( 1424): Nothing to do!

D/TIOverlay( 1424): overlay_setParameter(): OVERLAY_SET_SCREEN_ID :
stage->panel=0

I/TIOverlay( 1424): Nothing to do!

How
can I resolve this issue, will there be any modifications to be done
in Overlay object.
Thanks
GVK51

What steps will reproduce the problem?
1. build L27.12.1-P2_Gingerbread_pandroid_rls_v2 with tpm and tpm_tis kernel 
module
2. load the tpm kernel module insmod ./tpm.ko
3. load the tpm_tis kernel module insmod ./tmp_tis.ko

What is the expected output? What do you see instead?
When I try to load the tpm_tis kernel module sometimes the whole system freezes 
or I get the following output from dmesg:

<4>tpm_tis: Unknown symbol tpm_show_owned (err 0)
<4>tpm_tis: Unknown symbol tpm_show_pcrs (err 0)
<4>tpm_tis: Unknown symbol tpm_gen_interrupt (err 0)
<4>tpm_tis: Unknown symbol tpm_store_cancel (err 0)
<4>tpm_tis: Unknown symbol tpm_continue_selftest (err 0)
<4>tpm_tis: Unknown symbol tpm_calc_ordinal_duration (err 0)
<4>tpm_tis: Unknown symbol tpm_register_hardware (err 0)
<4>tpm_tis: Unknown symbol tpm_write (err 0)
<4>tpm_tis: Unknown symbol tpm_pm_suspend (err 0)
<4>tpm_tis: Unknown symbol tpm_show_enabled (err 0)
<4>tpm_tis: Unknown symbol tpm_get_timeouts (err 0)
<4>tpm_tis: Unknown symbol tpm_show_caps_1_2 (err 0)
<4>tpm_tis: Unknown symbol tpm_show_pubek (err 0)
<4>tpm_tis: Unknown symbol tpm_release (err 0)
<4>tpm_tis: Unknown symbol tpm_show_temp_deactivated (err 0)
<4>tpm_tis: Unknown symbol tpm_remove_hardware (err 0)
<4>tpm_tis: Unknown symbol tpm_read (err 0)
<4>tpm_tis: Unknown symbol tpm_open (err 0)
<4>tpm_tis: Unknown symbol tpm_pm_resume (err 0)
<4>tpm_tis: Unknown symbol tpm_show_active (err 0)
<6>tpm_tis tpm_tis: 1.2 TPM (device-id 0x8100, rev-id 147)
<6>tpm_tis tpm_tis: Unable to request irq: 19 for use
<3>tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
<3>tpm_tis tpm_tis: tpm_transmit: tpm_send: error 4294967291
<3>tpm_tis tpm_tis: tpm_transmit: tpm_recv: error 4294967291

What version of the product are you using? On what operating system?
L27.12.1-P2_Gingerbread_pandroid_rls_v2 build on Ubuntu 10.04 LTS
Pandaboard Rev A2

Please provide any additional information below.

What steps will reproduce the problem?
1. Boot up Android UI and move the mouse along
2. Cursor moves around, but the response is very slow
3.

What is the expected output? What do you see instead?
Mouse movements should be normal

Please use labels and text to provide additional information.

What steps will reproduce the problem?
1. Copy a helloworld.axf file to android fs via sd-card reader, for example 
"/data" folder.
2. Navigate to the folder.
3. Run "./helloworld.axf" in ADB shell or serial port shell.

What is the expected output? What do you see instead?
I expected that the "helloworld" printed on shell.
But, I get "./helloworld.axf: not found"


What version of the product are you using? On what operating system?
android 2.2


Please provide any additional information below.
The helloworld.axf build by amr-none-linux-gnueabi tool chain, and it works 
well in ubuntu running on Pandaboard.

What steps will reproduce the problem?
1. Install and run L27.12.1-P2 on a Pandaboard following the wiki
2. Click on Music or Contacts app in the Launcher

What is the expected output? What do you see instead?
Apps should start normally.
Instead, they crash, logcat reporting a complain about a 
ResourceNotFoundException (which does not make sense to me)

What steps will reproduce the problem?
1. Downloaded and compiled ASOP ICS branch on Ubuntu-10.04
2. While tried to booting with SD card, it is trying to read the following 
files and failed.
         a). preEnv.txt
         b). uEnv.txt
         c). boot.scr
3. After this got failed, it is reading uImage after that it is keep rebooting.

What is the expected output? What do you see instead?
Booting Android ICS on Pandaboard ES with HDMI.

What version of the product are you using? On what operating system?
Pandaboard ES, with Android ICS package (Linux-3.0.8) on ubuntu-10.0 Host PC

Please provide any additional information below.
I have attached the hyperterminal capture along with environment variable.

Pandroid_Froyo_L27.5.2.tar.gz is working for pandaboard rev # EA1 with DELL lcd 
panel. It seems that android is booting but there will be nothing on the screen.

The smsc95xx driver used on the Pandaboard generates a new random MAC address 
every time the interface is brought up.

The beagle xM community addressed this by basing the HWaddr on the hash of a 
board component's die ID.
http://patchwork.openembedded.org/patch/3441/

Ubuntu has provided a kernel arg to hard code the mac address and override the 
random creation.
https://bugs.launchpad.net/ubuntu/+source/linux-ti-omap4/+bug/673504

Please offer a similar workaround for the Pandroid kernel.

Hi

Did anyone used PandaBoard ES(MIPI-DSI) interface successfully light LCD panel ?

Thanks

What steps will reproduce the problem?

1.- We start downloading the kernel and file system, and proceed to Compile and 
load the kernel and file system to our panda board following the next page 
steps:

http://www.omappedia.com/wiki/4AI.1.4_OMAP4_Icecream_Sandwich_Panda_Notes

2.- We create a new driver that loads I2C and DSI drivers.

3.- with the I2C driver we configure our device to receive DSI video.

In the file "board-omap4panda.c" we modifiy in the next struct to switch the 
video output to DSI

static struct omap_dss_device *omap4_panda_dss_devices[] = {
    &omap4_panda_dvi_device,
    &omap4_panda_hdmi_device,
/*we add this line for the DSI video output.*/
    &omap4_panda_lcd_device, 
};

static struct omap_dss_board_info omap4_panda_dss_data = {
    .num_devices    = ARRAY_SIZE(omap4_panda_dss_devices),
    .devices    = omap4_panda_dss_devices,
/*we add this line for enable the DSI video output.*/
    .default_device = &omap4_panda_lcd_device,
/*we comment this line to disable the dvi video output.*/
    //.default_device = &omap4_panda_dvi_device,
/*we comment this line to disable hdmi video output.*/
    //.default_device = &omap4_panda_hdmi_device, 
};

When we change the code to use the DSI video output we successfully configure 
the DSI device but when the system tries to send video, the system shows the 
next error:

[    4.866668] Unable to handle kernel NULL pointer dereference at virtual 
address 00000000

And the panda reboots.

We are using IceCream sandwich 4AI.1.4 kernel 3.0.

Attached you can find the complete boot log.

Thanks and regards,
Luis Gallegos.

What steps will reproduce the problem?
1. Use lmbench suite - lat_mem_rd binary.
2. look at stride 128, array size 8M. latency is 300 ns.

What is the expected output? What do you see instead?
Since DDR2 is supposed to run at 400 MHz, latency should be ~150ns

What version of the product are you using? On what operating system?
Pandaboard with OMAP4430 ES2.1 chip. Android latest prebuild binaries.

Please provide any additional information below.
lat_mem_rd will try to read some data from buffers allocated in L1/L2/EMEM. Its 
a pretty reliable performance monitoring tool.

What steps will reproduce the problem?
1. i am using arm-2010q1 tool chain for compiling gingerbread

2. I am trying to build u-boot and type the following commands
make distclean
make ARCH=arm omap4430panda_config
make 2>&1 |tee $MYDROID/logs/u-boot_make.out

it gives the error:
arm-none-linux-gnueabi-gcc: Command not found

3.I have included the path in the global PATH variable and still get the error.

4.On typing file arm-none-linux-gnueabi-gcc
I get :
arm-none-linux-gnueabi-gcc: ELF 32-bit LSB executable, Intel 80386, version 1 
(SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.2.5, stripped

5.I am using Ubuntu 10.10 maverick.


Please help urgently because this has really gotten me stuck.

Thanks,
Sumit


What version of the product are you using? On what operating system?


Please provide any additional information below.

Iam new to pandaboard i followed the steps in the below link to build the 
binary images and the filesystem
http://www.omappedia.org/wiki/PandaBoard_L27.12.1-P2_Release_Notes

In that site i had almost done all the steps,,Expect the below step
****************Adding Mouse and Keyboard support******************

After building i booted the pandaboard with my images and filesystem,..Iam 
getting the UI of Android but it is getting turned off by showing the following 
error...

CPU1: shutdown
request_suspend_state: sleep (0->3) at 79463684009 (2000-01-01 
20:01:18.167571947 UTC)
omapdss HDMI: powerchg (a=0,v=3,s=0/0)->(a=0,v=3,s=1) = (0:S)
<dss_mgr_disable> disabling tv
omapdss HDMI: hot plug event 0
omapdss HDMI: error sending hot plug event 0 (-2)
omapdss HDMI: pwrchanged => (0,S) = 0
omapdss HDMI: Disable HDMI_PHY_48MHz clock, hdmi_power = 0

omapdss HDMI: Release L3 constraint
PM: Syncing filesystems ... done.
Freezing user space processes ... 
Freezing of user space  aborted

PLEASE FIND THE LOG FILE ATTACHED....

What steps will reproduce the problem?
1.) download and build a AOSP, flash it to pandaboard A1 or A2.
2.) create a incremental update package.
3.) adb push incremental.zip /cache 
4.) edit a file named 'command', -update_package=/cache/incremental.zip
5.) adb push command /cache/recovery 
6.) adb reboot recovery

What is the expected output? What do you see instead?
1.) We can update system successfully,but the UI is totally blank during the 
whole process of recovery.  
2.) The correct behavior is that we can see the UI,the robot and the progress 
bar.

What version of the product are you using? On what operating system?
1.） Device: pandaboard 
2.） System on device: Android ICS 4.0~4.4

Please provide any additional information below.
I reported this bug on this 
https://code.google.com/p/android/issues/detail?id=36053&q=Recovery%20UI&colspec
=ID%20Type%20Status%20Owner%20Summary%20Stars 

What steps will reproduce the problem?
1. Mouse cursor is visible at top left corner
2. But when the mouse is moved, cursor would not move

What is the expected output? What do you see instead?
Cursor should move with mouse movement

Please use labels and text to provide additional information.
Uses patch from 
http://git.android-x86.org/?p=platform/frameworks/base.git;a=commit;h=41d38532eb
9cc8a3bf6742abb344d86cd40639f1

What steps will reproduce the problem?
1. Follow these directions:
http://www.omappedia.org/wiki/PandaBoard_FAQ#How_do_I_saveenv_for_boot_args_on_a
_PandaBoard.3F

2. substitute in the appropriate args specified in the pandroid release notes

3. note that the board doesn't boot properly, boot script it not read by uboot.

http://pastebin.com/1zQcgpi3

What is the expected output? What do you see instead?
Boot args specified in boot script should be used.  You shouldn't have to 
provide the args over serial each time!

What version of the product are you using? On what operating system?
uboot as provided in 
http://code.google.com/p/pandroid/downloads/detail?name=Pandroid_Froyo_L27.8.2_r
elease_pkg.tgz&can=2&q=

Please provide any additional information below.
prpplague on #pandaboard look at the log and suggested uboot wasn't configured 
for reading in the file and would investigate the issue.

What steps will reproduce the problem?
1. run some android apps,like: Fruit Ninja and quake3
2.
3.

What is the expected output? What do you see instead?
the apps crash.

What version of the product are you using? On what operating system?
pandaboard+L27.12.1-P2_Gingerbread_pandroid_rls_v2

Please provide any additional information below.

What steps will reproduce the problem?
1. Run GFX sample apk programs from console.

For example,
am start -a android.intent.action.MAIN -n 
com.imgtec.powervr.ddk.gles2_texture_stream/com.imgtec.powervr.ddk.gles2_texture
_stream.GLES2TextureStream


What is the expected output? What do you see instead?
The correct image will only appear for a single frame, then
the program exits.

What version of the product are you using? On what operating system?
L27.5.2_panda from gitorious.  ES2.0 8 layer board.

Please provide any additional information below.
The problem may be obviated from the Pandroid desktop instead
of launching from console.

What steps will reproduce the problem?
1. Connect RS232 to the panda board and connect to it via minicom
2. Wait until Android has booted and is idle
3. Start typing in the console.  Characters are echoed
4. Wait 5 seconds (or longer)
5. Type again in the console.  First character is lost.

What is the expected output? What do you see instead?
I expect the first character to not be lost.

What version of the product are you using? On what operating system?
PandaBoard_L27.12.1-P2

Please provide any additional information below.
It seems that the console and any application running in the console goes to 
sleep after 5 seconds.  We have connected an expansion board to GPIO140 and 
generate a rising edge IRQ at 50Hz, written a driver to handle the IRQ and then 
a user space console application to select on a file handle that coordinates 
with the IRQ.

  The behavior is suspicious.  IRQ's come out at 50Hz most of the time, but every now and then they will stop for the timeout period of the user space select, which I've set at 2.5 seconds.  Constantly entering characters into the console will keep the IRQ's being handled so that none are missed.

video 1080p encode belong to  thirty party  or  free full support in this 
source?

Affected Version:
git://git.omapzoom.org/kernel/omap.git kernel/android-2.6.35

What steps will reproduce the problem?

1. Download 
http://www.codesourcery.com/sgpp/lite/arm/portal/package8741/public/arm-none-lin
ux-gnueabi/arm-2011.03-41-arm-none-linux-gnueabi.bin
2. Install Sourcery G++ Lite 2011.03-41 for ARM GNU/Linux
3. git clone 
4. cd kernel/android-2.6.35
5. git checkout ec895072ad0b686d2c130e5d80a3076a03042033
6. make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- panda_defconfig
7. make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- uImage

What is the expected output? What do you see instead?

Expected output is to get the kernel compiled and generate uImage.

Build errors:

arch/arm/mach-omap2/omap-headsmp.S:36: Error: selected processor does not 
support ARM mode `smc #0'
arch/arm/mach-omap2/omap44xx-smc.S:30: Error: selected processor does not 
support ARM mode `smc #0'
arch/arm/mach-omap2/sleep44xx.S:114: Error: selected processor does not support 
ARM mode `smc #0'
security/smc/omap4/bridge_pub2sec.S:95: Error: selected processor does not 
support ARM mode `smc #0'

Please provide any additional information below.

These build errors are assembler related errors due to gcc-4.5.2 version. 
Please find attach a patch that helps resolving the errors. Please update this 
information in 
http://www.omappedia.com/wiki/PandaBoard_L27.12.1-P2_Release_Notes#Setting_up_bu
ild_environment  In kernel & driver source section.

Thanks,
Mayank Chopra
[email protected]

hi

   this is srikanth i'm new for porting. am working on android(2.3.x) gingerbread(v2). i flowed that wiki producer but the hdmi display is not coming.
if any one got the display ,please "send producer link and working binaries and 
bootargs ".  

http://www.omappedia.org/wiki/PandaBoard_L27.12.1-P2_Release_Notes

is  pre-built binaries working ?

regards 
srikanth patchava 
9738451571

What steps will reproduce the problem?
1. Copy a 3gp file to sdcard,boot the board
2. play the 3gp file by gallery
3. it played low quality.

What is the expected output? What do you see instead?
It should be played high quality,but I cannot figure out what it was playing.

What version of the product are you using? On what operating system?
L27.12-P2. android,

Please provide any additional information below.
none.

What steps will reproduce the problem?
1. Install Pandroid L27.12.1-P2 release on the board. 
2. Use a resolution of 800x480. This requires modification of the hdmi driver. 
3. Press on any text field. 

What is the expected output? What do you see instead?
The android keyboard seems to the under the screen as if it was in portrait 
mode. 

What version of the product are you using? On what operating system?
L27.12.1-P2

Please provide any additional information below.