brainexe / bresserweatherstation-go Goto Github PK

Hi,
I built your code using go build and tried the following:

rtl_fm -M am -f 868.300M -s 48k -g 50 | tee out.bin | ./BresserWeatherStation-Go -noise=850

My output is:

Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Generic RTL2832U OEM
Detached kernel driver
Found Rafael Micro R820T tuner
Tuner gain set to 49.60 dB.
Tuned to 868552000 Hz.
Oversampling input by: 21x.
Oversampling output by: 1x.
Buffer size: 8.13ms
Exact sample rate is: 1008000.009613 Hz
Sampling at 1008000 S/s.
Output at 48000 Hz.

If I use this command:

rtl_fm -M am -f 868.300M -s 48k -g 50 | tee out.bin | ./BresserWeatherStation-Go -noise=700

The output is:

Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Generic RTL2832U OEM
Detached kernel driver
Found Rafael Micro R820T tuner
Tuner gain set to 49.60 dB.
Tuned to 868552000 Hz.
Oversampling input by: 21x.
Oversampling output by: 1x.
Buffer size: 8.13ms
Exact sample rate is: 1008000.009613 Hz
Sampling at 1008000 S/s.
Output at 48000 Hz.

cb transfer status: 1, canceling...

But thats all. Could you tell me which Antenna you used?

If I use this command:

rtl_fm -M am -f 868.300M -s 48k -g 50

I get a lot of unreadable data :)

Cheers