A full-featured Homeassistant component to drive Meross devices. This component is based on the underlying MerossIot library available here.

I had promised to the community that I would have focused my development efforts in the local-addon, and... so I am doing :) As already mentioned many times, the reason why it takes so much time is because everything done here is the result of hours and hours of procotol inspection sessions, reverse engineering and hacking.

Just to rise the hype, here there are some screens of the on-going development addon, which is 75% completed:

Meross Plugin has gained great success and popularity among the HomeAssistant users. However, the Meross engineers are imposing new limits on their MQTT broker system, which cause problems to the HA users who want to implement aggressive polling or have more than 10 devices connected to HA. For this reason, I am working on a new HomeAssistant addon, namely "Meross Local Addon", which aims at re-implementing the Meross MQTT Broker and HTTP API layer locally to the addon. This would basically allow users to rely only on LAN-local connection, using HomeAssistant as command center.

As you can imagine, there is a huge work behind that: first I need to reverse-engineer the Meross protocols, then I need to implement any "logic-layer" implemented on Meross Systems on the new addon I am developing and, eventually, I have to make sure that everything works together. That means that I am not able to spend much time in solving issues that may arise in the meantime, and for that I apologize. If you like this project and you want to support me, please consider donating: that motivates me and helps me buy more ram which is absolutely necessary when developing on a virtualized environment.

After months of work and sleepless weekends, it's finally time to present to the Meross community the new version of the HomeAssistant component that allows Meross device controlling. The new version of this library is based on the complete refactored low-level MerossIot library. It's now fully async, based on Meross push notifications and much more robust and resilient to network disconnections.

In case you are updating the component from legacy versions, you need to remove the previous one and fully remove cached devices/entities from your HomeAssistant installation. This is necessary as the library completely changed the device/entity naming system and is unable to remove previous entities installed by old versions of the component. Sorry about that.

My personal goal is to make this component fully compliant with Homeassistant, so that it may be added as the official library to handle Meross devices. However, before pushing a PullRequest to the official Homeassistant repository, I would like to share with to some users. In this way we can test it massively, check it for any bug and make it robust enough to be seamlessly integrated with Homeassistant.

For now, the component has been integrated as a custom component into HACS.

You can install this component in two ways: via HACS or manually. HACS is a nice community-maintained components manager, which allows you to install git-hub hosted components in a few clicks. If you have already HACS installed on your HomeAssistant, it's better to go with that. On the other hand, if you don't have HACS installed or if you don't plan to install it, then you can use manual installation.

If you have HACS, well, it's a piece of cake! Just search for "Meross" (Full name is Meross Cloud IoT) in the default repository of HACS and it'll show up! Click on Install: when done, proceed with component setup.

1. Download the latest zip release archive from here (or clone the git master branch)

2. Unzip/copy the meross_cloud directory within the custom_components directory of your homeassistant installation. The custom_components directory resides within your homeassistant configuration directory. Usually, the configuration directory is within your home (~/.homeassistant/). In other words, the configuration directory of homeassistant is where the config.yaml file is located. After a correct installation, your configuration directory should look like the following.

   └── ...
   └── configuration.yaml
   └── secrects.yaml
   └── custom_components
       └── meross_cloud
           └── __init__.py
           └── common.py
           └── cover.py
           └── ...
   

   Note: if the custom_components directory does not exist, you need to create it.

Once the component has been installed, you need to configure it in order to make it work. To do so, simply add a new "integration" and look for Meross among the proposed ones. The following animation shows how to do that.

This library supports all the Meross devices currently exposed by the Meross IoT library. In particular Bulbs, Switches, Garage Door Openers and Smart Valves/Thermostat are fully supported and perfectly integrated with HomeAssistant.

Have a look a the screenshots below...

Since I'm aiming at making this component part of the official HA repo, I've put a lot of effort into following HomeAssistant best practices, in particular:

• Asynchronous functions when possible;
• No polling: the library is event-based. It saves bandwidth and makes the UI much more reactive.
• Robust to disconnection: the library handles network disruption;
• Lovelace notification: supports UI persistent event notification;
• PEP8 code styling

By buying me a coffee, not only you make my development more efficient, but also motivate me to further improve my work. On the other hand, buying me a beer will certainly make me happier: a toast to you, supporter! In case you are a pro and a strong opensource supporter, you might also consider sponsoring my GitHub work.