Interlaced 3D modes skip 3 lines. about depth3d HOT 4 OPEN

Have added a new image below where the issue is more easily seen in the 3 places.

from depth3d.

I took my 3D screen and harddrive to a friends place a few days ago and connected both up to his newer PC which has an RTX3060 GPU.

After leaving I thought to myself that I didn't immediately notice any issues with missing lines, although I'm unable to 100% confirm at this stage as didn't think about it until later. I was using the same software and playing directly from my own hard drive so the install was no different.

My own GPU is just the very old integrated Intel HD4000 of my 2012 model laptop so perhaps that's where the issue is.

from depth3d.

Interlace reconstruction mode shows 3 lines across the screen for me, so it's not just you. RTX 3070 here.

You can see it in normal interlace mode, too, it's just a bit harder. Well, it's really hard to see in the interlaced image, but look at the top left and you'll see two interlaced lines along the rock edges that swap dark/light on the same line.

from depth3d.

Interlace reconstruction mode shows 3 lines across the screen for me, so it's not just you. RTX 3070 here.

You can see it in normal interlace mode, too, it's just a bit harder. Well, it's really hard to see in the interlaced image, but look at the top left and you'll see two interlaced lines along the rock edges that swap dark/light on the same line.

I can actually see 4 lines in your images, two at the top in the sky, one level with the top of the guy's head and one level with the bottom of the NW text on the compass. So in the same places as I am seeing them I think although you have an additional one at the top of the screen.

from depth3d.