Comments (19)
hi had downloaded the raspberry image from http://dietpi.com/ and it works... now it's downloading many files :)
from amiberry.
Thanks for the screenshots 👍
I just tested my RPi 2011.12 256mb (made in UK). Working fine.
Ok, lets try a fresh installation, please do the following:
- Download the image here: http://dietpi.com/downloads/images/DietPi-AmiBerry_RPi-armv6-(Jessie).7z
- Extract it
- Write the image to SD card
- Plug in SD card
- Plug in Ethernet (remove the usb wifi)
- Power on device
If you get the error you mentioned earlier (eth0: not found... ), could you take a picture of the screen with the error please.
from amiberry.
Thanks for confirming. :)
from amiberry.
@barnie1989
Which Raspberry Pi model and revision (on board, near RPi logo) are you using?
from amiberry.
P1, 2011.12
At the backside: E1114RS2V13B1.0
from amiberry.
@barnie1989
256mb or 512mb? Ideally if you can take a picture of the front and back, i'd be grateful.
When you powered on the RPi with the image for the 1st time, did you have a working network cable attached?
from amiberry.
512MB, network cable was attached during all my tests. I booted several times
from amiberry.
from amiberry.
@barnie1989
Thanks for the pic.
Possible causes:
- 4.4.19 firmware
- eth index higher than 9 (dietpi checks for available eth adapters from 0-9)
an other sd card wirh a standard system works...
Does the official Raspbian Jessie image work on your system? https://www.raspberrypi.org/downloads/raspbian/
If so, we can test if 4.4.19 firmware is the cause by running the following on that image:
rpi-update
reboot
#check version
uname -a
#ping test
ping google.com
ifconfig results
Please replicate the picture in your previous post, then:
- Press CTRL+C to cancel connection test
- It should return to cmd line
#
, if not, you may need to login withroot
dietpi
- Type
ifconfig -a
then take another picture please
from amiberry.
@barnie1989 did you get a chance to try out the above suggestion by @Fourdee ?
from amiberry.
I'm not at home, so I need some days...
from amiberry.
@barnie1989 sure, no problem. As long as we know, we can wait. :)
from amiberry.
@barnie1989
Any news on this please?
from amiberry.
the standard image is running!
is that for your image or the standard image???
rpi-update
reboot
#check version
uname -a
#ping test
ping google.com
from amiberry.
@barnie1989
Did I understand correctly that it works in Raspbian?
Does it work after the rpi-update in DietPi?
from amiberry.
please see the last comment from Fourdee
from amiberry.
I've updated my comment to clarify... :)
Does it work for you after the rpi-update?
from amiberry.
Yes, this image works fine directly after the download:
https://www.raspberrypi.org/downloads/raspbian/
from amiberry.
And does it work in DietPi if you run the same there?
e.g.:
apt-get install rpi-update
rpi-update
reboot
from amiberry.
Related Issues (20)
- PanelCPU.cpp -->> helptext needs some fixing [English/formatting] HOT 1
- When GUI window becomes inactive, contents are no longer redrawn/updated HOT 2
- Using --autoload cmdline option results in seg_fault HOT 6
- Multiple Controllers' Buttons Not Working in RetroPie HOT 8
- PanelFloppy.cpp ....GUI and helptext formatting [spawn of commit a27b3b3] HOT 2
- Ambiguity wrt internal/replacement ROM usage HOT 4
- NumLock "flash" doesn't work while DFx working HOT 7
- Extend 'save this disk config' to provide same facility for whdload archives? HOT 7
- Amiberry splash-screen sometimes red, sometimes cyan (whdbooter auto configurator) HOT 2
- GCC13.1 build fails HOT 4
- Hotkey selection not saved to amiberry.conf [GUI --> Miscellaneous ] HOT 1
- Fullscreen toggle hotkey not working HOT 4
- Odd display handling when quitting amiberry [GUI] HOT 9
- Amiberry on macOS M1 crashes when I try to use Drawbridge (Greaseweazle) real drive as DF0 HOT 9
- Selected 'FullScreen' hotkey not saved to amiberry.conf [GUI --> Miscellaneous ] HOT 3
- macOS M1 native builds no longer released HOT 5
- uae-configuration crashes Amiberry HOT 4
- Amiberry v5.6.1 binary tarball broken on Debian 10.13 HOT 4
- Floppy drive sounds not working?
- CPU usage in native Status Line always displays 0% unless using Fastest Possible HOT 12
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from amiberry.