Device producing screechy high-pitched noises at random intervals, similar to the "Annoy-a-tron". This device is powered by an inexpensive ATtiny microcontroller.

Parts required (total value less than $2):

• ATTiny85 or ATMega8/16/32 microcontroller
• 1x 1uF capacitor
• 1x 10K resistor
• 1x 2N2222 transistor
• 1x speaker 8 to 30 Ohms
• 4.5V to 6V battery (2xCR2032 batteries work)
• Wire to make connections

Software requirements:

avr-gcc
avr-libc
avrdude

To compile the code, type:

make build

To program into your microcontroller, type:

make fuse
make flash

Testimonials from unwilling, annoyed users:

"What's that sound!?"

"Maybe it's the printer"

"I once spent half an hour looking for it, couldn't find it"

During tests, the evice is able to operate for over two months drawing power from two 3V CR2032 batteries connected in series. After two months of operation, a battery voltage of 4.0V was measured with a 100Ohm load.