APS - Automatic Protection System
The module controls the current and voltage, supports the management and transmission of telemetry data on the CAN bus.
Special features:
- STM32 is used as a control controller.
- Configuring peripherals and generating a project in STM32CubeMX.
- Project for System Workbench for STM32.
Parameter | Note | Planned add |
---|---|---|
Voltage limit in | 9 - 18 V (hard set in code) | Add remote setting by CAN bus |
Voltage limit out | 9 - 18 V (hard set in code) | Add remote setting by CAN bus |
Current limit | Set by switch S1 (when turned on) | Add remote setting by CAN bus |
Voltage measurement in | Sending by CAN bus | - |
Voltage measurement out | Sending by CAN bus | - |
Current measurement | Sending by CAN bus | - |
Temp measurement | Sending by CAN bus | - |
Commutation (Load On/Off) | By CAN. By pressing the external button | - |
Project structure:
- Scheme: \data\scheme.png
- Task: \data\task.docx
- Check list: \data\check_list.docx
- Short description \data\short_description.docx
- Project for STM32F103C8 \STM32F103C8