billchent / cheetah-software Goto Github PK

This repository contains the Robot and Simulation software project. For a getting started guide, see the documentation folder.

The common folder contains the common library with dynamics and utilities The resources folder will contain data files, like CAD of the robot used for the visualization The robot folder will contain the robot program The sim folder will contain the simulation program. It is the only program which depends on QT. The third-party will contain small third party libraries that we have modified. This should just be libsoem for Cheetah 3, which Pat modified at one point.

Doxygen document: https://mit-biomimetics.github.io

To build all code:

mkdir build
cd build
cmake ..
./../scripts/make_types.sh
make -j4

If you are building code on your computer that you would like to copy over to the mini cheetah, you must replace the cmake command with

cmake -DMINI_CHEETAH_BUILD=TRUE

otherwise it will not work. If you are building mini cheetah code one the mini cheetah computer, you do not need to do this.

This build process builds the common library, robot code, and simulator. If you just change robot code, you can simply run make -j4 again. If you change LCM types, you'll need to run cmake ..; make -j4. This automatically runs make_types.sh.

To test the common library, run common/test-common. To run the robot code, run robot/robot. To run the simulator, run sim/sim.

Part of this build process will automatically download the gtest software testing framework and sets it up. After it is done building, it will produce a libbiomimetics.a static library and an executable test-common. Run the tests with common/test-common. This output should hopefully end with

[----------] Global test environment tear-down
[==========] 18 tests from 3 test cases ran. (0 ms total)
[  PASSED  ] 18 tests.

To run the simulator:

1. Open the control board

./sim/sim

2. In the another command window, run the robot control code

./user/${controller_folder}/${controller_name} ${robot_name} ${target_system}

Example)

./user/JPos_Controller/jpos_ctrl 3 s

3: Cheetah 3, m: Mini Cheetah s: simulation, r: robot

1. Create build folder mkdir mc-build

2. Build as mini cheetah executable cd mc-build; cmake -DMINI_CHEETAH_BUILD=TRUE ..; make -j

3. Connect to mini cheetah over ethernet, verify you can ssh in

4. Copy program to mini cheetah with ../scripts/send_to_mini_cheetah.sh

5. ssh into the mini cheetah ssh [email protected]

6. Enter the robot program folder cd robot-software-....

7. Run robot code ./run_mc.sh

• Qt 5.10 - https://www.qt.io/download-qt-installer
• LCM - https://lcm-proj.github.io/ (Please make it sure that you have a java to let lcm compile java-extension together)
• Eigen - http://eigen.tuxfamily.org
• mesa-common-dev
• freeglut3-dev
• coinor-libipopt-dev
• libblas-dev liblapack-dev

To use casadi,

• sudo apt-get install gfortran liblapack-dev
• sudo apt-get install coinor-libipopt-dev