bigbugcc / openwrts Goto Github PK

View Code? Open in Web Editor NEW

398.0 6.0 173.0 5.98 MB

OpenWRT 应用商店固件(Raspberry Pi4B/3B+，NanoPi R2S/R4S，Orange Pi R1Plus，x86/64) 依源码更新自动编译(周更)

License: MIT License

Shell 100.00%

openwrt lede actions raspberry-pi nanopi-r4s nanopi-r2s x86-64 orange-pi vmdk docker

openwrts's People

Contributors

Stargazers

Watchers

Forkers

shishumo modafpv zhucaidan xiao6768 zuozishi lyyzz gaohanas btcslg bao3 b14esh mybbsky2012 204wuyu faizulpaydo 2984397010 andromedax7 narutoboruto cornyk fingertap tigerlee100307 ygas rossdee ahmednajmudeen wikihacker bartlet mypal sunsulei yeiiow0828 chenpapa isyuz coolbele cyberplayboy safe-b kenhtaymay y-axis-1 ronglixu twotu lynkliu shytml zyu163 ggyzh123 xodaaaa aaashuai koileo wj55 skyforce2000 ab1641824134 yifang5775 kxxh tqizhe yccci gtrwolf wuziqiu666 eamesh chenghoward pama0227 jamswu mypythontest sabully hasayakey misakajialin xiapw123 jklm23 lininn liniaa yzbas123 wyh136 wowoyoho lcyf9102s dgl999 jefferylakie afcafcafc wan-cpu 9018 supercca vagex 223333 vasonwu elvenp 7363399 iamzhuang umbrella22 hxh01 raymondsun1919 ap0rpi7uq9 pmxer5lzwz karrychang marcokexb wodehijieaas wgcairui jaygith teuchezh edinmeow majiajue crasuslee kele180801 programfan tshakitit doraeomnxu rzwt leter

openwrts's Issues

能否把zerotier增加为常用插件

大佬，你好：
我最近用树莓派4B做软路由，发现该固件很好用，就是缺一个zerotier。自己在“软件包”内安装了zerotier，但刷新了界面或重启了设备，还是没有相关的配置栏显示。希望大佬能把zerotier添加为常用固件，内网穿透很好用。望大佬抽点小空，修改一下。谢谢

无法正常挂载ntfs的硬盘

通过挂载点配置无法正常挂载ntfs的硬盘树莓派4

无法正常使用ipv6

为什么没有luci-app-openvpn插件呢

ipv6

没有支持ipv6版本的固件吗

软件包

发现软件包里的「已安装软件包」和「可安装软件包」过滤出来是一样的…
硬件是使用R2S，另外语言只有「简中」，能加上「英文」或是「繁中」选项吗？
过滤出来的luci-i18n-也仅有cn可选…

怎么编译最基础版本在docker里面运行 openwrt ?

目前看了很多配置文件，都是openwrt作为docker的host..
而我需要的是反过来, openwrt作为docker的镜像..

怎么编译最基础版本在docker里面运行 openwrt ?
R5S 宿主机 debian, 已经安装docker跑其他的了，
为了不污染环境，想在docker里面跑openwrt, 【而且不能host网络模式, 毕竟不能影响已有dockers镜像服务】
同时,R5S 是2个lan口，做主路由..怎么构建?
文档和dockerfile 能不能支援下.

默认地址和硬路由地址冲突了怎么办

请问默认地址和硬路由地址冲突了怎么办

AP mode doesn't work on Raspberry Pi 4B

When trying to turn on AP mode on the built-in wifi module of my Raspberry Pi 4B, I got the following error message in system log:

Wed Jan  5 19:28:03 2022 daemon.notice netifd: Interface 'lan' is enabled
Wed Jan  5 19:28:03 2022 daemon.notice netifd: Interface 'lan' is setting up now
Wed Jan  5 19:28:03 2022 daemon.notice netifd: Interface 'lan' is now up
Wed Jan  5 19:28:03 2022 daemon.notice netifd: bridge 'br-lan' link is up
Wed Jan  5 19:28:03 2022 daemon.notice netifd: Interface 'lan' has link connectivity
Wed Jan  5 19:28:03 2022 daemon.notice netifd: Network device 'eth0' link is up
Wed Jan  5 19:28:03 2022 daemon.notice netifd: radio0 (7069): command failed: No error information (-524)
Wed Jan  5 19:28:03 2022 daemon.notice netifd: radio0 (7069): command failed: I/O error (-5)
Wed Jan  5 19:28:04 2022 daemon.notice hostapd: Configuration file: /var/run/hostapd-phy0.conf (phy wlan0) --> new PHY
Wed Jan  5 19:28:04 2022 kern.info kernel: [  168.736870] br-lan: port 2(wlan0) entered blocking state
Wed Jan  5 19:28:04 2022 kern.info kernel: [  168.742190] br-lan: port 2(wlan0) entered disabled state
Wed Jan  5 19:28:04 2022 kern.info kernel: [  168.747704] device wlan0 entered promiscuous mode
Wed Jan  5 19:28:04 2022 daemon.notice hostapd: wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
Wed Jan  5 19:28:04 2022 daemon.notice hostapd: wlan0: interface state COUNTRY_UPDATE->HT_SCAN
Wed Jan  5 19:28:04 2022 kern.err kernel: [  168.755566] ieee80211 phy0: brcmf_run_escan: error (-52)
Wed Jan  5 19:28:04 2022 kern.err kernel: [  168.760898] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Wed Jan  5 19:28:05 2022 kern.info kernel: [  169.283467] br-lan: port 2(wlan0) entered disabled state
Wed Jan  5 19:28:05 2022 kern.info kernel: [  169.290029] device wlan0 left promiscuous mode
Wed Jan  5 19:28:05 2022 kern.info kernel: [  169.294567] br-lan: port 2(wlan0) entered disabled state
Wed Jan  5 19:28:05 2022 kern.err kernel: [  169.360574] ieee80211 phy0: brcmf_run_escan: error (-52)
Wed Jan  5 19:28:05 2022 kern.err kernel: [  169.365923] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-52)
Wed Jan  5 19:28:05 2022 daemon.err hostapd: Failed to request a scan of neighboring BSSes ret=-52 (No error information)
Wed Jan  5 19:28:05 2022 daemon.notice hostapd: wlan0: interface state HT_SCAN->DISABLED
Wed Jan  5 19:28:05 2022 daemon.notice hostapd: wlan0: AP-DISABLED
Wed Jan  5 19:28:05 2022 daemon.err hostapd: wlan0: Unable to setup interface.
Wed Jan  5 19:28:05 2022 daemon.notice hostapd: nl80211: deinit ifname=wlan0 disabled_11b_rates=0
Wed Jan  5 19:28:05 2022 daemon.notice hostapd: nl80211: Failed to remove interface wlan0 from bridge br-lan: Invalid argument
Wed Jan  5 19:28:06 2022 daemon.notice hostapd: wlan0: CTRL-EVENT-TERMINATING
Wed Jan  5 19:28:06 2022 daemon.err hostapd: hostapd_free_hapd_data: Interface wlan0 wasn't started
Wed Jan  5 19:28:06 2022 daemon.notice netifd: radio0 (7069): Command failed: Invalid argument
Wed Jan  5 19:28:06 2022 daemon.notice netifd: radio0 (7069): Device setup failed: HOSTAPD_START_FAILED
Wed Jan  5 19:28:19 2022 user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
Wed Jan  5 19:28:20 2022 user.notice nlbwmon: Reloading nlbwmon due to ifup of lan (br-lan)

It seems hostapd tried to start but failed. Could you please advise on whether AP mode is not supported for RPi 4B?