bepass-org / warp-plus Goto Github PK
View Code? Open in Web Editor NEWThis project forked from wireguard/wireguard-go
Warp+Psiphon, an anti censorship utility for iran
License: MIT License
This project forked from wireguard/wireguard-go
Warp+Psiphon, an anti censorship utility for iran
License: MIT License
سلام
این روش برای ویندوز آیا قابل پیاده سازی هست چون خیلی وقته وارپ نسخه ویندوز من با نت مخابرات دیگه فعال نمیشه چطور میتونم فعالش کنم وارپ عالی بود ولی انگار فایروالا ایران بایپسش کردن دیگه فعال نمیشه اگه راهی هست ممنون میشم راهنمایی کنید
ممنون
please please please provide a solution for mikrotik implementation and the step by step guide
thanks
Version number
v1.1.3
Describe the bug
Sometimes I get this error when accessing valid URLs:
414 Request-URI Too Long [IP: 127.0.0.1 8086]
To Reproduce
Steps to reproduce the behavior:
./warp-plus --gool -b 127.0.0.1:8086 --scan --rtt 300ms -4
sudo nano /etc/apt/apt.conf
Acquire::http::Proxy "http://127.0.0.1:8086";
sudo apt update
This is what happens for me:
Hit:1 http://nova.clouds.archive.ubuntu.com/ubuntu jammy InRelease
Err:2 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-updates InRelease
414 Request-URI Too Long [IP: 127.0.0.1 8086]
Get:3 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Ign:3 http://security.ubuntu.com/ubuntu jammy-security InRelease
Hit:4 https://download.docker.com/linux/ubuntu jammy InRelease
Get:5 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-backports InRelease [109 kB]
Ign:5 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-backports InRelease
Get:3 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Ign:3 http://security.ubuntu.com/ubuntu jammy-security InRelease
Get:5 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-backports InRelease [109 kB]
Ign:5 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-backports InRelease
Get:3 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Ign:3 http://security.ubuntu.com/ubuntu jammy-security InRelease
Get:5 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-backports InRelease [109 kB]
Ign:5 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-backports InRelease
Get:3 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB]
Err:3 http://security.ubuntu.com/ubuntu jammy-security InRelease
Error reading from server. Remote end closed connection [IP: 127.0.0.1 8086]
Get:5 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-backports InRelease [109 kB]
Err:5 http://nova.clouds.archive.ubuntu.com/ubuntu jammy-backports InRelease
Error reading from server. Remote end closed connection [IP: 127.0.0.1 8086]
Reading package lists... Done
E: Failed to fetch http://nova.clouds.archive.ubuntu.com/ubuntu/dists/jammy-updates/InRelease 414 Request-URI Too Long [IP: 127.0.0.1 8086]
E: The repository 'http://nova.clouds.archive.ubuntu.com/ubuntu jammy-updates InRelease' is no longer signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
Desktop (please complete the following information):
سلام، هر ورژنی از وارپ رو نصب میکنم برای ویندوز فقط فولدر استاف رو میسازه و میپره بیرون. تمام ورژن هارو هم امتحان کردم، ممنون میشم مشکلش رو درست کنید
سلام موقع اجرا این ارور رو میده
دسترسی هم داره ترموکس
time=2024-03-23T17:11:09.901Z level=INFO msg="using warp endpoints" endpoints="[162.159.192.62:7103 162.159.192.62:7103]"
time=2024-03-23T17:11:09.902Z level=INFO msg="running in normal warp mode"
time=2024-03-23T17:11:09.906Z level=ERROR msg="Unable to update bind: permission denied" subsystem=wireguard-go
time=2024-03-23T17:11:09.909Z level=ERROR msg="Unable to update bind: permission denied" subsystem=wireguard-go
time=2024-03-23T17:11:09.909Z level=ERROR msg="permission denied"
In the 1.0 Version, Account Information will not be saved. I have to enter the key as a parameter each time I want to run my warp plus service. Previous Version did not have this behavior.
After Registering Warp Plus Key, and the Account is created, on next normal runs a free account is auto generated
I live in middle east(!) and when I use Warp or Warp+ I get germany ping... is there anyway to get ping from UAE or Bahrain? ( I don't mean the IP for a country I just mean ping! after using warp my lowest ping is from Germany but I want the lowest to be for UAE or Bahrain)
Pls help
2024/03/06 21:09:21 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:21 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:21 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:22 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:23 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:24 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:27 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:28 connect to 8.8.8.8:443 failed: listen udp 8.8.8.8:443: bind: cannot assign requested address
2024/03/06 21:09:28 connect to 8.8.8.8:443 failed: listen udp 8.8.8.8:443: bind: cannot assign requested address
2024/03/06 21:09:28 connect to 8.8.8.8:443 failed: listen udp 8.8.8.8:443: bind: cannot assign requested address
2024/03/06 21:09:30 connect to 8.8.8.8:443 failed: listen udp 8.8.8.8:443: bind: cannot assign requested address
2024/03/06 21:09:31 connect to 8.8.8.8:443 failed: listen udp 8.8.8.8:443: bind: cannot assign requested address
2024/03/06 21:09:34 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:36 read tcp 172.16.0.2:25531: connection reset by peer
2024/03/06 21:09:47 connect to 157.240.205.63:443 failed: listen udp 157.240.205.63:443: bind: cannot assign requested address
2024/03/06 21:09:50 connect to 216.58.206.46:443 failed: listen udp 216.58.206.46:443: bind: cannot assign requested address
2024/03/06 21:09:50 connect to 216.58.206.46:443 failed: listen udp 216.58.206.46:443: bind: cannot assign requested address
2024/03/06 21:09:51 read tcp 172.16.0.2:18123: connection reset by peer
2024/03/06 21:09:51 connect to 216.58.206.46:443 failed: listen udp 216.58.206.46:443: bind: cannot assign requested address
2024/03/06 21:09:52 connect to 216.58.206.46:443 failed: listen udp 216.58.206.46:443: bind: cannot assign requested address
2024/03/06 21:09:54 connect to 216.58.206.46:443 failed: listen udp 216.58.206.46:443: bind: cannot assign requested address
2024/03/06 21:10:01 read tcp 172.16.0.2:62060: connection reset by peer
Version number
ALL
Describe the bug
One of the most affordable routers in Iran that supports the OPENWRT operating system is the Xiaomi 4A Gigabit router, which utilizes MIPS32 architecture. Unfortunately, the file for this architecture is not available in the downloads section.
Please build and add the MIPS32 architecture file as well.
Thanks
Screenshots
Screenshot comparing two files: xray (executable on this router) and Warp-Plus (not executable on this router).
Additional context
If you need more details, let me know
Hi I've tested warp-plus on Telecommunication Company of Iran and figured that using --scan isn't much effective and data transfer rate drops to zero soon or late after connection established. So I wrote this batch script to find clean ip and Determine connection interrupts. It first use nslookup to grab CF ip behind these two popular websites in iran : "tgju.org" and "zula.ir". then i've used curl to check connection every 20 seconds to determine connection interrupts with 4s timeout. if timeout reached and no response received, script uses killtask to terminate warp-plus.exe then use nslookup for another website in a loop....
Can you include these to warp-plus ?? this connection is way more Stable . Sorry For Bad English
`
@echo off
setlocal enabledelayedexpansion
:start
for /f "tokens=2 delims=: " %%a in ('nslookup -q=A tgju.org ^| findstr /R "^Addresses: [0-9].[0-9].[0-9].[0-9]$"') do (
set ip=%%a
goto :break
)
:break
start /b warp-plus.exe -e !ip!:890
timeout /t 5
goto :loop
:start2
for /f "tokens=2 delims=: " %%a in ('nslookup -q=A zula.ir ^| findstr /R "^Addresses: [0-9].[0-9].[0-9].[0-9]$"') do (
set ip=%%a
goto :break2
)
:break2
start /b warp-plus.exe -e !ip!:880
timeout /t 5
goto :loop2
:loop
curl --proxy 127.0.0.1:8086 --max-time 4 http://gstatic.com/generate_204
if %errorlevel% neq 0 (
echo Connection failed
taskkill /F /IM warp-plus.exe
goto :start2
) else (
echo Connection successful
)
timeout /t 20 /nobreak
goto :loop
:loop2
curl --proxy 127.0.0.1:8086 --max-time 4 http://gstatic.com/generate_204
if %errorlevel% neq 0 (
echo Connection failed
taskkill /F /IM warp-plus.exe
goto :start
) else (
echo Connection successful
)
timeout /t 20 /nobreak
goto :loop2
`
با سلام وخسته نباشین،
خیلی جا های دور افتاده فقط و فقط همراه اول به عنوان اینترنت در دست رس هست ، و رو همراه اول رسما هیچی وصل نمیشه! من همه جوره تست کردم وصل نشد رو همراه اندپوینت دست نزدم کلی صبر کردم نشد، یه اند پوینت که رو نت وای فای وصل میشد زدم رو همراه باز وصل نشد لطفا رو همراه اول قشنگ بررسیش کنین و اوکی کنین... دو روز دیگه فیلترینگ نت وای فای هم میشه مثل همراه اول و رسما هیچی وصل نمیشه دیگه... تشکر فراوان از شما عزیزان
نسخه پی سی اخرین نسخه oblivion-desktop
bepass-org/oblivion-desktop#174
طبق پیشنهاد دوستمون اینجا هم مطرح کردم لطف کنین روی همراه اول اوکیش کنین ممنونم
how to use android release? there is just a file not apk version
When using the proxy 127.0.0.1:8086 directly in telegram, telegram constantly switches between connecting and connected to proxy status like for 20 times before reaching stability for a few seconds
But when using an intermediate proxy app like nekobox to redirect to another port like 2080, it works perfect
Changing the default bind address in warp-plus does not fix the problem , using intermediate proxy app seems necessary for me
Version Number: 1.1
Bug Description:
Does Warp Plus support UDP protocol? When attempting to use Telegram voice, connection fails, although it works fine in other scenarios.
Follow these steps to reproduce the behavior:
Utilize UDP protocol.
Specifically test with Telegram voice.
Please add --version
the -scan switch is not mentioned in readme file switch sections
after go build this message appear and i cant install it on linux server
root@newhost:~/warp-plus# go build
go: downloading github.com/klauspost/compress v1.16.7
../go/pkg/mod/github.com/refraction-networking/[email protected]/u_handshake_client.go:15:2: github.com/klauspost/[email protected]: reading https://proxy.golang.org/github.com/klauspost/compress/@v/v1.16.7.zip: 403 Forbidden
Hi , Can you please add Connect via LAN feature ? , ty <B
Currently other device in network cant access to specific port and ip inside home network.
I have an xiaomi ax3200 router
I installed the arm64 version, but the connection is not established
If it is connected to the same network with another router with arm7 processor.
Did I download the wrong version or is the problem somewhere else?
These values are displayed by running the warp command.
root@OpenWrt:~# warp
time=2024-04-29T21:20:10.596Z level=INFO msg="successfully generated wireguard configuration" subsystem=warp/account
time=2024-04-29T21:20:10.597Z level=INFO msg="successfully generated wireguard configuration" subsystem=warp/account
time=2024-04-29T21:20:10.597Z level=INFO msg="using warp endpoints" endpoints="[162.159.195.127:1180 162.159.195.127:1180]"
time=2024-04-29T21:20:10.597Z level=INFO msg="running in normal warp mode"
time=2024-04-29T21:20:12.785Z level=ERROR msg="listen tcp 127.0.0.1:8086: bind: address already in use"
configuration:
#!/bin/sh /etc/rc.common
START=91
USE_PROCD=1
PROG=/usr/bin/warp
start_service() {
args=""
args="$args -b 127.0.0.1:8086 --scan"
procd_open_instance
procd_set_param command $PROG $args
procd_set_param stdout 1
procd_set_param stderr 1
procd_set_param respawn
procd_close_instance
}
Adding a feature that after entering the Warp Plus license, a message will be shown indicating that the license is correct and valid and that the conversion to Warp Plus has been successful. This can be very helpful for a better user experience and can even be used in Android and Windows software, which will be very helpful.
Thanks
How can we change Default DNS server from default Google DNS to something else? I mean by a command line flags instead of editing generated profile file.
It's just a guide on how to run this on OpenWRT as a service on startup. nothing fancy.
First download the binary based on your device's CPU architecture.
Create a directories for binary and config files:
mkdir /etc/wplus
mkdir /usr/local/bin
copy the extracted warp-plus binary you downloaded to /usr/local/bin
folder.
give it executable permissions
chmod +x /usr/local/bin/warp-plus
create a config file for it. e.g /etc/wplus/config.json
{
"verbose": false,
"bind": "0.0.0.0:8086",
"endpoint": "",
"key": "",
"gool": true,
"cfon": false,
"country": "US",
"scan": true,
"rtt": "1000ms"
}
run it to test if it works as expected:
/usr/local/bin/warp-plus -c /etc/wplus/config.json
create an init script for it on /etc/init.d:
#!/bin/sh /etc/rc.common
USE_PROCD=1
START=88
STOP=89
PROG=/usr/local/bin/warp-plus
PROG_CONF=/etc/wplus/config.json
start_service() {
procd_open_instance
procd_set_param command "$PROG" -c "$PROG_CONF"
procd_set_param file "$PROG_CONF"
procd_set_param stdout 1
procd_set_param stderr 1
procd_set_param respawn ${respawn_threshold:-3600} ${respawn_timeout:-5} ${respawn_retry:-5}
procd_close_instance
}
/etc/init.d/wplus start
/etc/init.d/wplus enable
Enjoy!
P.S If you want to to see the logs, just use logread:
logread -f |grep "warp-plus"
Version number
The version of the application that has the bug.
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behavior:
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Smartphone (please complete the following information):
Additional context
Add any other context about the problem here.
سلام نسخه ویندوز obvilion دسکتاپ ای پی تمیز میدی دستی کار نمی کنه روی ایرانسل و همراه اول ومخابرات وشاتل دوم سایفون مشکل داره وصل میشه هیچی باز نمی کنه سوم با اینترنت دانلود منینجر هیچی دانلود نمیشه کرد از سایت فیلتر شده کل سیستم ویندوز تونل نمی کنه واتساپ ماکروسافت استور لود نمیشه ارور میزنه و دانلود منینجر دانلود نمی کنه ارور میزنه
latest version.
Connection won't be established.
msg="ping error" subsystem=scanner subsystem=scanner/ engine addr=2606:4700:00:0:753b:eacc:adbf:8d67 error="dial udp [2606:4700:d0:0:753b:eacc:adbf:8d67]:928: connect: network is unreachable"
msg="pinging IP" subsystem=scanner subsystem=scanner/ engine addr=162.159.195.59
msg="ping error" subsystem=scanner subsystem=scanner/ engine addr=162.159.195.59 error="read udp 192.168.8.161:47456->162.159.195.59:864: i/o timeout"
msg="pinging IP" subsystem=scanner subsystem=scanner/ engine addr=188.114.99.239
msg="ping error" subsystem=scanner subsystem=scanner/ engine addr=188.114.99.239 error="read udp 192.168.8.161:48761->188.114.99.239:1002: i/o timeout"
msg="pinging IP" subsystem=scanner subsystem=scanner/ engine addr=162.159.192.127
msg="ping error" subsystem=scanner subsystem=scanner/ engine addr=162.159.192.127 error="read udp 192.168.8.161:38856->162.159.192.127:4198: i/o timeout"
msg="pinging IP" subsystem=scanner subsystem=scanner/ engine addr=162.159.193.227
msg="ping error" subsystem=scanner subsystem=scanner/ engine addr=162.159.193.227 error="read udp 192.168.8.161:45815->162.159.193.227:1180: i/o timeout"
msg="pinging IP" subsystem-scanner subsystem=scanner/ engine addr=188.114.98.45
msg="ping error" subsystem=scanner subsystem=scanner/ engine addr=188.114.98.45 error="read udp 192.168.8.161:47180->188.114.98.45:939: i/o timeout"
msg="pinging IP" subsystem=scanner subsystem=scanner/ engine addr=188.114.97.17 msg="ping error" subsystem=scanner subsystem=scanner/
engine addr=188.114.97.17 error="read udp 192.168.8.161:49225->188.114.97.17:3581: i/o timeout"
msg="pinging IP" subsystem=scanner subsystem=scanner/ engine addr=188.114.96.1
سلام و عرض ادب
داشتم یه بتچ فایل برای خودم مینوشتم تا با کمک tun2socks بتونم تمام ترافیک سیستم رو به وارپ پلاس پروکسی کنم(اسکریپت).
مشکلی که هست اینه وارپ پلاس هروقت اجرا میشه ایپی endpoints متغیره و تغییر میکنه. که البته خیلی هم خوب است! منتهی من برای اجرای tun2socks لازم دارم قبلش اون ایپی که برای endpoints وارپ پلاس ست شده رو پیدا کنم و هنگام روت کردن ترافیک سیستم این این ایپی رو از کل سیستم مستثنی کنم.
برای اینکار دو راهکار پیشنهادی دارم.
۱- وارپ پلاس زمان اجرا خودش ایپی endpoints رو در یک متغییر(environment variables) ست کنه!
۲- وارپ پلاس زمان اجرا ایپی endpoints رو در یک فایل تو فولدر stuff ذخیره کنه!
سلام
من از این برنامه رو سرور استفاده میکنم
وقتی که به سرور متصل میشم و برنامه وارپ بدون مشکل کار میکنه
اما زمانی که مصرف زیاد میشه مثلا زمانی که تست سرعت میگیرم مصرف رم به قدری میره بالا که سرور فریز میشه
با دستور زیر هم که مصرف رم رو محدود میکنم تا یه جایی درست کار میکنه اما وفتی یه فایل 200 مگ رو دانلود میکنم ، برنامه بسته میشه
systemd-run -p MemoryMax=124M --user ./warp
من از سرور ubuntu 20.04 استفاده میکنم با 1 GB رم
روی ورژن 22 اوبنتو هم تست کردم اما همین مشکل بود
warp version : v1.0.4-rc2
**Version Number
1.1.3
**Description of the bug
Unable to connect to psiphon nether warp
**How to reproduce
Steps to reproduce the behavior:
**Expected behavior
Connecting?!
Screenshots.
If applicable, include screenshots to help explain your problem.
Desktop (please fill in the following information):.
Smartphone (please provide the following information):.
**Additional context
IR-MCI
Is it possible to pass command line flags by means of a config file instead of passing them all on command line?
سلام من نسخه ویندوزی این اپ را روی ویندوز 11 اجرا کردم و با تنظیمات پروکسی ویندوز وصل شدم. این اپ ظاهرا امکانات سایفون و تعیین کشور و یک سری دستورات اجرایی داره. اموزش ویدیویی یا ساده ای نیست اینو یاد من مبتدی بده؟ فقط ای پی وارپ ایران میده؟ ممنون
thanks for this great work. please add a new features to getting transfer and transmitted packet sizes of opened session.
for now, anyone have a idea to give any info about getting downloaded and uploaded traffic size?
Add a flag for zero trust support
what's the difference between this and official warp client on Android? because this works but the official client doesn't. what exactly makes this app work in Iran?
چه تغییری توی برنامه باعث میشه که این توی ایران کار کنه ولی برنامه رسمی کلودفلر کار نکنه ؟
Version number
The version of the application that has the bug.
Describe the bug
A clear and concise description of what the bug is.
To Reproduce
Steps to reproduce the behavior:
Expected behavior
A clear and concise description of what you expected to happen.
Screenshots
If applicable, add screenshots to help explain your problem.
Desktop (please complete the following information):
Smartphone (please complete the following information):
Additional context
Add any other context about the problem here.
سلام نسخه ویندوز obvilion دسکتاپ ای پی تمیز میدی دستی کار نمی کنه روی ایرانسل و همراه اول ومخابرات وشاتل دوم سایفون مشکل داره وصل میشه هیچی باز نمی کنه سوم با اینترنت دانلود منینجر هیچی دانلود نمیشه کرد از سایت فیلتر شده
Hi, Thanks for the great project.
Is it possible to have a Tun mode for warp-plus so we don't have to use alternative solutions to tunnel traffic? or It would be amazing to have the official Wireguard app with your modifications, so it's very easy and convenient, and resource friendly.
warp-plus
on Windows 11Description:
Encountered an error when attempting to run the warp-plus
application after successfully cloning and building the repository. The error indicates that the system cannot find the specified path for the wgcf-profile.ini
file.
Environment:
warp-plus
rev-7beee3eSteps to Reproduce:
cd C:\Users\aliag\Downloads
git clone https://github.com/bepass-org/warp-plus.git
cd warp-plus
go build
warp-plus
Expected Result:
The application should run without errors.
Actual Result:
The application fails with the following error message:
time=2024-05-23T12:33:29.472+03:30 level=INFO msg="using warp endpoints" endpoints="[[2606:4700:d0:0:9d85:fa03:a42d:4204]:8854 [2606:4700:d0:0:9d85:fa03:a42d:4204]:8854]"
time=2024-05-23T12:33:29.472+03:30 level=INFO msg="running in normal warp mode"
time=2024-05-23T12:33:29.478+03:30 level=ERROR msg="open C:\\Users\\aliag\\AppData\\Local\\cache/warp-plus/primary/wgcf-profile.ini: The system cannot find the path specified."
Additional Information:
wgcf-profile.ini
) in the directory C:\\Users\\aliag\\AppData\\Local\\cache/warp-plus/primary/
.example vpn tunnel with root.sh file
https://github.com/MatsuriDayo/nekoray/blob/main/res/vpn/vpn-run-root.sh
change the settings of the file and add the file into the linux.tar.gz and when i run root.sh file after entering root password rool.sh file launch the warp with vpn mode
launching warp plus alone launch the proxy mode this option is really cool
As I like to run anything in containers, having a Dockerfile and automated container image builds in order to run this awesome warp-in-warp alongside other proxy providers like xray
is a big plus from my POV.
When you are going to run other projects like xray-core, or MHSanaei/3x-ui in a container, having this warp-plus as an outbound could help eliminating cost of having foreign servers. With this setup, only a single domestic server would be enough to bypass censorship.
Also, it's possible to provide domestic domain routing policies if the server is located inside the country with censorship and routing the domestic websites to freedom
output.
Assume that we are going to run this warp-plus as an outbounds
in an xray
container. The sample xray
configuration would be something like this:
{
// ...
"inbounds": [
{
// ...
// <YOUR DESIRED INBOUNDS like socks>
// ...
}
],
"outbounds": [
{
"mux": {
// ...
},
"protocol": "socks",
"settings": {
"servers": [
{
"address": "<warp-plus CONTAINER NAME>",
"port": "<warp-plus CONTAINER PORT>",
// ...
}
]
},
"streamSettings": {},
"tag": "proxy"
},
{
// ...
// < other outbounds like freedom, vmess, vless, etc>
// ...
}
],
// ...
}
Version number
1.1.3
Describe the bug
Hello
i'm using warp-plus on android termux app and i set local proxy on v2rayng to route my data trough it.
i see high battery usage on termux with warp-plus compared to Clash or v2rayNG
i've noticed the app is logging all info and i can't disable it by command.
i think you should make an option on next version to disable all logs or user can change log levels to none, error, warning, debug & info or make a parameter for silent mode.
maybe warp-plus use too much battery because of log generation and we can prevent it.
i saw same problem on oblivion android app and if this problem causes by logging system, you can fix it on oblivion too.
Thanks
To Reproduce
run warp-plus with termux + v2rayNG (for using with local socks proxy)
monitor the battery after a while
Expected behavior
make an option for users to manage log levels or use as silent mode
Smartphone (please complete the following information):
Hi Mark, I tested the version you posted in Actions (warp: refactor identity creation)
1_ The first movie (when I enter the command warp-plus-4 and when we exit, the IPs are again broken and
and it connects with IP v6, while it should be connected with v4)
2_ The second movie (sometimes it brings IP v6 first, if there is a problem with the shatel and mci with ipv6 and the config doesn't connect)
3- The third movie (by entering the warp-plus -e command, when we want to change the IP and port, the IP does not change and the IPs of the boiler are connected).
Hello, Today, May 20th, severe disturbances in Iran's Internet have started since this morning, I got help from both oblivion and hiddify programs for testing, and now, the result was oblivion and hiddify on the first mobile phone and shuttle with no suffering. Warp IPs do not connect, all the IP ranges are blocked. pi, we have to enter a domain from Warp domains in order to connect to Daro normally, I am asking you, dear manufacturer, to add the possibility of adding a domain instead of an IP in both the core of Wireguard Go and the oblivion program. ( If possible, add the singbox core to the program, with the possibility of editing the config due to minor changes that cause connection to the warp.
Because I was able to connect to Warp with these minor changes)
is there any way to pass traffic in special port, not tunnel all ?
this error occurs when I tried option 4 :
Please enter your selection [0-5]:4
Downloading and running Warp+ script...
--2024-03-06 20:16:09-- https://raw.githubusercontent.com/Ptechgithub/configs/main/wa.py
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3186 (3.1K) [text/plain]
Saving to: ‘wa.py’
wa.py 100%[=====================================================================================>] 3.11K --.-KB/s in 0.001s
2024-03-06 20:16:10 (3.00 MB/s) - ‘wa.py’ saved [3186/3186]
File "wa.py", line 26
referrer = input(f"[#] ENTER WARP+ ID [Your id: {default_id}] : ") or default_id
^
SyntaxError: invalid syntax
v1.1.3
Connecting and disconnecting after a while
also i need to know how to i can change free license to warp plus in windows?
termux cmd not worked in windows.
I usually want to create a link to the executable warp-plus
and put it in /usr/bin
folder so that I can run the app from the terminal easily. However, the stuff
folder pops up in my home directory which is annoying. More surprisingly, if you run the warp-plus
from other directories in the terminal, then the stuff
folder appears in those directories too! I think it would be more reasonable for the stuff
folder to show up in the same original directory where the executable warp-plus
is.
لطفا نسخه 32 بیتی رو هم بروز کنید
Hi,
I think it's good to add an option to choose Warp give ipv4 or ipv6. I have some issue with that because when I connect with it, it gives ipv6 every time.
please provide http proxy in addition to socks , its very useful for connecting in other apps like twitter and windscribe desktop as upstream proxy
It seems that it is always getting "loc=US" at my network environment in the warp in warp mode. Is it possible to change into another location?
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.