Comments (6)
I don't have wifi access today but I'm running cyanogen 4.0.4 myself and have
an RSA
key for my VPN... I just tried on my data connection and it worked fine. I was
still
able to ping non-VPN sites as well as VPN ones.
1- Can you try on your data connection as well?
2- Did things work for you with the same VPN server before?
Original comment by babak.mozaffari
on 3 Sep 2009 at 5:16
from get-a-robot-vpnc.
1- by data connection, you mean over the air, not wifi correct? I don't have my
phone and sim in front of me but will test later.
2- The settings i used do work from linux using vpnc on my desktop, but have not
tried cyanogen/vpn before.
Original comment by [email protected]
on 3 Sep 2009 at 5:20
from get-a-robot-vpnc.
data connection doesn't help. The only thing i see in the logcat is about the
pid file:
D/VPN_Connections( 392): password ********
D/VPN_Connections( 392): done interacting with vpnc
D/VPN_Connections( 392): process stderr:
D/VPN_Connections( 392):
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): process stdout: Connect Banner:
D/VPN_Connections( 392): | *** Wind River Systems, Inc. Authorized Use Only ***
D/VPN_Connections( 392):
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): Read vpnc process id as 1238
D/VPN_Connections( 392): vpnc still trying to connect. Will check again in 500
milliseconds
D/VPN_Connections( 392): process stdout: backing up dns and resolve.conf
D/VPN_Connections( 392): vpnc-script ran to completion
D/VPN_Connections( 392): process stderr: vpnc[1238]: can't open pidfile
/var/run/vpnc/pid for writing
D/VPN_Connections( 392): Connect string detected!
I/global ( 392): Default buffer size used in BufferedReader constructor. It
would
be better to be explicit if an 8k-char buffer is required.
I/global ( 392): Default buffer size used in BufferedReader constructor. It
would
be better to be explicit if an 8k-char buffer is required.
D/VPN_Connections( 392): Monitoring will not start
Original comment by [email protected]
on 4 Sep 2009 at 3:57
from get-a-robot-vpnc.
Weird, everything in the log indicates that you were successfully connected. I
wonder
if it's a DNS issue. Can you try pinging your intranet (and regular internet)
sites
by IP? Also check your Linux vpnc settings and see if there are any flags you
need to
set on vpnc for your particular vpn server.
Original comment by babak.mozaffari
on 4 Sep 2009 at 8:32
from get-a-robot-vpnc.
I think this problem comes up after the lease time of the dhcpcd is over...
I'm having this issue here, the vpn connection goes dead as soon as the IP
address is
renewed due to dhcpcd... either we should stop dhcpcd or find another solution.
PS: I think this is about the same problem:
https://bugzilla.redhat.com/show_bug.cgi?id=447246
Original comment by [email protected]
on 13 Sep 2009 at 3:51
from get-a-robot-vpnc.
Hi, I have recent problems with this issue too.
Here's the info:
Using any version .09 or above = same problem.
I use --natt-mode cisco-udp in the flags.
My netcfg shows that I have indeed connected and have new IP address.
getprop net.dns1 and net.dns2 show the dns servers at my site.
However, when I do an nslookup, I get server and address 4.2.2.5 . I tried
removing
and readding the cisco-udp flag, but it is like the vpnc startup is ignoring it.
Any ideas or advice?
***
The funny thing is that it does work when I initially install it after a flash
of
new rom - but quits working and never works again until I totally rebuild my
phone.
Any help is appreciated. Thanks!
Original comment by [email protected]
on 13 Feb 2010 at 3:28
from get-a-robot-vpnc.
Related Issues (20)
- How trustworthy can this client be?
- reboot xperia x10 mini
- Can't connect without Group login/password
- need tun.ko for 2.6.32.9 samsung galaxy 3 gt-i5800 HOT 2
- Is hybrid mode supported? HOT 1
- Internal addresses will not work without domain suffix HOT 1
- VPN Connection works, but no routes to the corporate network
- VPNC on Honeycomb (Acer A500) HOT 1
- If it's possible, need tun.ko module for Samsung Galaxy Tab gt-p1010 wifi only HOT 4
- Tablet/Landscape
- Motorola milestone tun.ko for kernel 2.6.32.9-g11068ed
- Wrong time format for last connected
- Fail To Connect - ps | grep 'vpnc$' | cut -c 10-14
- Samsung Galaxy Note HOT 2
- resolv.conf not getting VPN dns entry HOT 1
- CM9 Alpha 3 for Epic 4G Touch HOT 1
- Reboot phone when start vpnc HOT 1
- Can robot-vpnc work with config files
- Option Enable Single DES
- The FROYO tun.ko not works to load
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from get-a-robot-vpnc.