datasafe is a software you can run on an arduino to have a safe storage for you data. The objective is to build a hardware device withit you can store your data safely. The device has only a touchscreen display and a nfc interface for login. Your data is stored on a sd card in an encrypted way. There are no other interfaces.

!! This software is currently only a click dummy. I'm working on it !! The complete encryption is currently missing.

see IDEAS.md

• Arduino (tested with an UNO r3)
• NFC Reader/Writer (tested with adafruit PN532 RFID/NFC Shield 13.56MHz)
• Touchscreen Display (tested with adafruit 2.8" TFT LCD shield w/Touchscreen)

• arduino-core (http://www.arduino.cc)
• bboortz/arduino-libs (https://github.com/bboortz/arduino-libs)
• Adafruit_GFX (https://github.com/adafruit/Adafruit-GFX-Library)
• Adafruit_ILI9341 (https://github.com/adafruit/Adafruit_ILI9341)
• Adafruit_STMPE610 (https://github.com/adafruit/Adafruit_STMPE610)
• Adafruit_NFCShield_I2C (https://github.com/adafruit/Adafruit_NFCShield_I2C)
• MemoryFree (https://github.com/maniacbug/MemoryFree) [if PROG_ANALYZE_MEM is defined - disabled by default]

• Install the development sofware $ apt-get insall arduino

• Copy the required libraries

• Copy the datasafe software

• Debian Wheezy
• Arduino 1.0.5
• UECIDE 0.8.7