GIT TUTORIALS BY AR512:
git config --global user.name "Awanit512"
git config --global user.email "[email protected]"
git config user.name
git config user.email
git config --list
git config --global code.editor vim
git config code.editor
To startr tracking initials yr directory/folder by git by below command (this will create a hidden folder names as .git We can see it by command --> ls -a )
git init
git status
touch first.txt
echo "Hell this is my first file of this begiiner Git Tutorials" >> first.txt
1> adding a modified file to a staging area as well as it also helps 2> To add untracked files (ex: a newly created file ) to a staging area .) command :
git add filename
git add --a
git add .
git add file1 file2 file3 file4 ..
git commit -m "Initial Commit"
git log
rm -rf .git
To clone a remote repo say --> https://github.com/remote_repo/remote_repo.git (this is a fake url)
git clone https://github.com/remote_repo/remote_repo.git
touch .gitignore
and now put names of the files which u didn't want to track in .gitignore so whwnver u add a name of file in .gitignore and suppose made a change in files which is listed in .gitignore then any changes done to those files will be ignored, but yaeh only .gitignore will be modifed as git do tracks .gitignore directory so we have to staged that and commit it.
examples of names/files in .gitignore (all files names with extension .logs will be ignored it can be in any subdirs too still it will be ignored, error.log will be ignored, all files inside dir directory( this dir directory can be presnt in any subdirectory of root foler of our project but still it will be ignored by git ) will be ignored.) Note: : the /dir/ directory states that to ignore the directory named as dir in root folder of our project.
*.logs error.log /dir/ dir/
Git diff : Calculates the diff between unmodified files in staging area and modified files in working directory.(ex:: i staged the file say readme.md after that i modified the same file then readme.md will be in both -> Staging area ( Changes to be Committed ) as well as in -> Changes not staged for Commit.
git diff
git diff --staged
git diff < source branch > <target branch>
Skipping the staging area (so yeah we can commit the tracked modfied file directly with adding into staging area explicitly by single command)
git commit -a -m "skiiping satging area and commiting directly"
PS:: suppose u have created a new file by say touch new_file.txt then as it will be untracked so using above command i.e git commit -a -m "any suitable commit message here" will not commit the untracked file this command will commit only tracked modiied file. for untracked u have to use command git add new_file.txt in order to make it tracked after that u can use above command to directly commit it skipping the habit of adding files to staging area explicitly.
PS :: :: Note the -a flag helps to add files to staging area implicitly after that it finally commit it.
note :: we can remove the files by simply deleting it or renamed it (f1.txt --> g1.txt ) say by use of GUI but in this case later the git status shows a new file (g1.txt ) which is -->untracked which i use to renamed the older file (f1.txt ) and also show the status of older file (f1.txt) which i renamed as deleted. But yeah once we add it to staging area by git add . then it shows the right message i.e renamed : f1.txt to g1.txt
so instead of deleting in this way bettwe to delete via git as changes such as renaming and deleting are automatically staged so just need to commit.
git rm f1.txt
where f1.txt is the name of file to be deleted.
git mv f1.txt g1.txt
where f1.txt is the renamed to g1.txt.
Now we just need to do git commit -m "" in order to commit the new chaneges.
#####################################3########### IMP #############################################
Suppose we made any tracked file say first.txt into .gitignore and commit it by git commit -a -m "make firt.txt to ignore by git"
then after modiftying first.txt it still get reflected in git status logically :: it should not be there as we already listed it into .gitignore so it shoud stop tracking it but No , it will still track it because since we have keep the name of file in .gitignore which earlier was getting tracked by the git so we have to tell explicitly to git not to track by the command
git rm --cached first.txt
Note this command will not delete the file but rather stop tracking it, so now it can be sucefully ignored by the git . But Note upon typing git status it will list :
Changes to be commited: <--------- (this line because we used git in front of git rm --cached first.txt so no need to add changed to staging area already staged and is ready for commit) deleted : first.txt <------- IT to be noted here we have just make git not to tracked but it list deleted
We just need to commit our change again do git status we will find tree is clean.
So,the aboe command just untracked the file .
SO a Q: Wgy git status does not show that file first.txt as untracked
Ans : Because , we had put the name of the file in .gitignore So, obviously if we don't put that in .gitignore then obviously it will listed as untracked .
So this is a way to untracked a file
Q: WHAT IF WE want to track it again ?
Ans: if file is not listed in .gitignore then simply git add that_filename or else
first remove its name from .gitignore
git rm --cached jj.txt
git add jj.txt
git commit -m "making jj.txt is gtting tracked now."
git log // to view the commit
git log -p // shows the diff value (whatever things removed or added in the commit )
git log -p -2 // shows the diff value (whatever things removed or added in the commit ) for only first two commits.
git log --stats // gives information of just showing no of changes addition or subtraction/deletions in each files. i.e short summary of nuber of changes followed by number of additions and number of deletions.
git log --pretty=oneline //show all commits in one line
git log --pretty=short //show all commits in short detailing commit hash id, Author and commit message
git log --pretty=oneline //show all commits in full detailing commit hash id, Author, Committer and commit message
## time filter logging
git log --since=n.seconds // n or 2 can be subituted replaces respectively by some other number
git log --since=n.minutes
git log --since=2.hours
git log --since=2.3.days
git log --since=2.years
git log --since=2.months
git log --since=2.weeks
git log --since=2.days
# Different format in pretty check in git log on internet
git log --pretty=format:"%h -- %an" // hash commit -- author name ---> "%h -- %an"
git log --pretty=format:"%h -- %ae" // hash commit -- author email--> "%h -- %ae"
git add .
git commit --amend // amend means minor chanegs in just previous commit.
git restore --staged <filename>
To Unmodify a File: Suppose you modified a file named first.cc now u want to restore the previous vesrion:
git restore first.cc
git checkout -- first.cc
Note PS:: the 'git restore' compares working dir changes to its nearest one i.e staging area or .git repo if ur file is not in staging area as it not yet staged then on restoring it will checkout to previous commit changes else if its staged then only non staged changes of that file will be removed leaving behind staged chanegea
for removing staged changes too two ways:
1> firt make the file unstaged by 'git restore --staged <filename>' after that 'git restore <filename>'
2> [ NOT RECCOMENDED ] git checkout -f // straightforward leads to previos commit dangerous if u dont want to reached to preivios commit state for other files .
supoose mny changes have been done and now don't want to commit these changes but rather want to go back to previous / or wnat to restore the previosu commit
git checkout -f
git remote add origin https://github.com/Awanit512/GitWithAr512.git
// meaning this command add remote URL https://github.com/Awanit512/GitWithAr512.git (this is for github we can siliarily go for gitlab) by name as a origin. here instad of origin we can keep other name such as git remote add MAINORIGIN https://github.com/Awanit512/GitWithAr512.git but its feneral parctise to say that as origin
Note :: It is recommended to use ssh url for pushing as -->Support for password authentication was removed on August 13, 2021 so git will tell you to use a personal access token instead. For setting this :
--------------------------------------------------------------------------------------------------------
^^^^^
Follows Following steps :
>>> ssh-keygen -t ed25519 -C "your_github_email_here.com"
//This will generate private/public key pair
>>> eval "$(ssh-agent -s)"
>>> ssh-add ~/.ssh/id_ed25519
>>> tail ~/.ssh/id_rsa.pub
Now in the output copy the key and Go To github repo in which you want to push
Go to settingd-->
Deploy Krys-->
Add Deploy Key-->
Give the Titile and paste the key in Key TextArea which u copied from the terminal.
After thta changes can be easily pushed to yrs repo.
--------------------------------------------------------------------------------------------------------
git remote
o/p-->origin
git remote -v
o/p-> origin https://github.com/Awanit512/GitWithAr512.git (fetch)
origin https://github.com/Awanit512/GitWithAr512.git (push)
git branch -M main // by default its main if this step is skipped thne git implicitly do this
--> Branch 'main' set up to track remote branch 'main' from 'origin'.
git push -u origin main
Enter urs username and Password if promplted : to push yr changes to github repo. ( remember the password is that ssh deploy key. if forgot then set up the new one by following same step as detailed above in ^^^^^)
If not working see this video : https://www.youtube.com/watch?v=ytSoabxSQ6E
May be github is saying that Key is in use in that case generate new Personal access token as u may be probbly doing things via HTTP and not ssh.
Suppoose u want to remove the exsting origin URL then
git remote remove origin
Now u can add any other origin URL by 'git remote add origin '
OR
Above both steps for acheving goal( i.e changing origin url to something else )can be done by following command:
git remote set-url origin <required_new_url>
| Command | Description |
|---|---|
git push origin [branch name] |
Push a branch to your remote repository |
git push -u origin [branch name] |
Push changes to remote repository (and remember the branch) |
git push |
Push changes to remote repository (remembered branch) |
git push origin --delete [branch name] |
Delete a remote branch |
git pull |
Update local repository to the newest commit |
git pull origin [branch name] |
Pull changes from remote repository |
Git ALiases it helps to write just a short command for the long commands by aliasing those commnads.
examples we suppose want git st t perform same as git status we can do this by :
git config --global alias.st status
Now 'git st' is same as 'git status'
now lets commit by git cmit by
git config --global alias.cmit commit
Now both git commit -m " " is same as git cmit -m " "
Now lets make a alias for unstaging the file say f1.txt
git config --global alias.unstaged 'restore --staged'
Now git restore --staged f1.txt is same as git unstaged f1.txt
Now lets make another alias for checking last commit and last two commits :
git config --global alias.last 'log -p -1'
NOW, git log -p -1 is same as git last
and
git config --global alias.last-two 'log -p -2'
NOW, git log -p -2 is same as git last-two
Lasly To remove the aliases : (suppose we wan't to remove alias.last-two then do following: )
git config --global --unset alias.last-two
If it's local then don't give the --global flag i.e 'git config --unset alias.last-two'
This way doing seems safer than ediiting config file by : --> 'git config --global --edit'
------------------------------------------------------------------------IMPORTANT-------------------------------------------------------------------------
in order to make a branch type following :
git checkout -b develop // where develop is the branch name here this command create a new branch by -b flag and chekcout to new branch.
Difference between git checkout and git branch
git branch <new-brach-name> :- creates a new branch but stays at existing branch.
git checkout -b <new-branch-name> :- creates a new brahc and check in to new barnch.
git chckout -b <branch-name> == git branch <new-branch>
git switch <new-branch>
or
git branch <new-branch>
git checkout <new-branch>
# To list all the BRANCHES:
git branch
# To list all branhces (local and remote ):
git branch -a
# To move to some branch say dev
git checkout dev
or
git switch dev
git checkout -b <branch-name> origin/<branchname>
git branch -m <old-branch-name> <new-branch-name>
assume we are in main branch
git merge tryFeature
To Merge source branch into target branch :
git merge <source branch> <target branch>
whenever mege conflict arises it starts with a 'conflict resolutio marker'
<<<<<<< HEAD and end with >>>>>>> tryFeature assuming conflict is between brancehs HEAD (main) & tryFeature
and code part which creates conflict between both branches is seperated by ======= .
example:
<<<<<<< HEAD
<h1>Hi THis is Awanit512 </h1>
=======
<h1>hello WORLD!!!!!!!!!!!!!!!</h1>
>>>>>>> tryFeature
For resolving it either kep both or Imcoming Changes( changes of tryFeature branch) or keep changes Current branch (i.e of main branch)
--------------------------------- Branch Management ---------------------------------------------------------
To list all branches(* shows currently we are in which branch )
git branch
To show all branches with last commit's commit hash id and commit message
git branch -v
o/p: develop cc2b884 Monster Video removed
* main fc1ab0f merged
master 1170d3e [ahead 1, behind 9] nothing much
tryFeature c755a89 hello world
To show all the branches which are merged :
git branch --merged
To show all the branches which are not yet merged :
git branch --no-merged
To delet a merged branch (else if it is not merge then it will throw a error with warning)
git branch -d tryFeature
//(as tryFeature is already merged in main.) like this :
error: The branch 'develop' is not fully merged.
If you are sure you want to delete it, run 'git branch -D develop'.
If you are sure you want to delete it even if the brach (say develop) is not merged yet then, run:
git branch -D develop
i.e
git branch -D <branch-name>
We generally make two types of branches:
1>Long Running Branches : long lived span of life of these branches is long exmaple master, develop, system, propose change
2>Topic Branches : plugin change, etc.
git push origin <branch-name> // It is good practised to be locally on same branch to which u want to push
if we want at remote to have this branch as some other name then we can do so by this way :
git push origin <branch-name>:<branch-remote-new-name>
ex :(assmuing we are in branch mybugfix and want to push it but named it there on remote as just bugfix)
git push origin mybugfix:bugfix
If we want to delete the branch locally :
git branch -d <branch-name> // assuming it alreayd merged else thorw an error. if still want to delete it then
git branch -D <branch-name>
if we want to delete the branch in remote say on github :
git push -d origin <remote-branch-name_to_delete>
or
git push origin --delete <remote-branch-name>
**How To fork a repo(it may be of ssomeone else or it may be yrs repo) into another (existing ) repo of mine **
Credit: https://deanmalone.net/post/how-to-fork-your-own-repo-on-github/
The forked repo is the repo in which u want to forked it (Your repo )
git clone https://github.com/<username>/<forked-repo>.git
cd <forked-repo>
# This is from where or the repo whose copy u want to make or the repo u want to fork (someone other repo u have to make it upstream)
git remote add upstream https://github.com/<username>/<original-repo>.git
git pull upstream master
#if giving error of merging unrelated historiy
git pull upstream master --allow-unrelated-histories
git push origin main
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent