audiconnect / audi_connect_ha Goto Github PK

Thanks for great component!

Sad that it does not support my Skoda.

I did looked into it a bit, seems that Skoda implementation is very similar. It has a bit different login procedure but not much more than that.

Example of universal implementation of similar component (which partly works for my car): https://github.com/TA2k/ioBroker.vw-connect/blob/master/main.js

Would you like to change implementation into something more generic? I.e. remove audi_ from file names and add ability to change some services based on vendor.
I might be able to help with Skoda specifics.

Hi Arjen,

Unfortunately, climatisation still does not start. HA logs the following message:

Unable to start climatisation of [vin]: 400, message='Bad Request', url='https://msg.volkswagen.de/fs-car/bs/climatisation/v1/Audi/DE/vehicles/[vin]/climater/actions
(I replaced the VIN number with [vin])

Thomas

Hi,

I like the integration, but would it be possible to get actual kW charging information, like in the app?

Regards,

jasper

Hello,

the Tank level is stuck to 100%. All the other sensor is working fine.

Thanks!

Thank you very much for this integration. I did start my own, but didn't finish it to this level because of busy working days :(

Would it be possible to add support for the state of the folding top? I have only a german account, but it is available in webview and in the app:

charging power and charging rate status remain unavailable when the car is plugged in. However when I restart HA (and the car is charging) the status of the charging power and charging rate is updated.

I didn't look into the code yet, but it appears that you need to fetch charging power and charging rate when the "charging state" has changed to "charging".

Any idea how this can be improved?

Hello. I have an issue where some of the binary sensors for the doors and windows return incorrect values.

Vehicle is a 2018 S5 Coupé (UK) - 3 door.
The integration is added via HACS with the correct username, password & SPIN. The integration creates 1 device and 20 entities.
All functions and statuses report correctly within the myAudi App.

The Lock/Unlock via the integration created lock entity perform correctly and the system updates the 'Last Updated' sensor to the present date and time*. The mileage, range, oil level, service intervals, location, etc. all update with the correct values.

xxx represents the vehicle registration.

binary_sensor.xxx.doors_lock shows 'unlocked' and does not update irrespective of the state of the door locks - myAudi updates successfully (see note below). Changing the status of the actual door lock via the key, MyAudi App or HA lock function does not change this state.
binary_sensor.xxx_trunk_lock - changes status with the locking state of the car.

binary_sensor.xxx_doors shows 'open' even when doors are closed. App shows closed.
binary_sensor.xxx_windows shows 'open' even when Windows are closed. App shows closed.
binary_sensor.xxx_trunk - changes status with the opening of any door or trunk.

*sensor.xxx_last_update updates to the actual last updated date and time but then defaults back to 0002-11-29 23:00:00 within 5 minutes.

Many thanks for your help

Edit: Remove personal data

I get from the US invalid_grant. Can anyone confirm that it still works. The Token API should be: https://id.audi.com/v1/token?

It would be nice if this component could be updated from HACS

Hey,
I have a SQ7 and everthing is fine, but the only information I get for the etron 2021 is the vehicle type.
I don't get any information about battery status, windows, etc.

Any ideas?

Thanks

I just wanted to add the updated integration (thanks a lot!) to Home Assistant, but I get the following error after restarting Home Assistant:

[homeassistant.setup] Setup failed for audiconnect: Unable to import component: No module named 'bs4'

When trying to add the integration using the Home Assistant GUI it says

[homeassistant.config_entries] Error occurred loading configuration flow for integration audiconnect: No module named 'bs4'

Thanks

After updating, i get this error:

Setup failed for beautifulsoup4: Integration not found.

Initialize problem since update to HA 103.0
2019-12-13 19:22:01 ERROR (MainThread) [custom_components.audiconnect.audi_connect_account] 502, message='Bad Gateway', url='https://msg.audi.de/fs-car/core/auth/v1/Audi/DE/token 2019-12-13 19:22:11 ERROR (MainThread) [homeassistant.setup] Setup failed for audiconnect: Integration failed to initialize.

Whenever i hit the Un/Lock button it doesn't work and the logs show 2020-04-17 17:01:09 ERROR (MainThread) [custom_components.audiconnect.util] Unable to unlock "{secret vinn number}": invalid literal for int() with base 16: 'wa'

Got these after upgrade to supervisor224 and hassio 0.110.2.:

Protokolldetails ( WARNING )
Logger: homeassistant.components.lock
Source: components/lock/init.py:72
Integration: Schloss (documentation, issues)
First occurred: 15:02:33 (1 occurrences)
Last logged: 15:02:33

LockDevice is deprecated, modify AudiLock to extend LockEntity
Verbindung getrennt. Verbinde erneut...

Protokolldetails ( WARNING )
Logger: homeassistant.components.binary_sensor
Source: components/binary_sensor/init.py:139
Integration: Binärsensor (documentation, issues)
First occurred: 15:02:33 (1 occurrences)
Last logged: 15:02:33

BinarySensorDevice is deprecated, modify AudiSensor to extend BinarySensorEntity

• translations but there is already an opene issue

Just updated using HACS this morning and I am getting this error:

2020-01-22 10:22:42 ERROR (MainThread) [homeassistant.setup] Setup failed for audiconnect: Unable to import component

I have tried reverting back to a backup and it works. I have also tried a clean install (deleted directory manually) but nothing changes.

It seems Audi has changes something and now it doesn't work anymore:

2020-05-18 08:25:35 ERROR (MainThread) [homeassistant.core] Error doing job: Task exception was never retrieved
Traceback (most recent call last):
  File "/config/custom_components/audiconnect/audi_account.py", line 158, in update
    if not await self.connection.update(None):
  File "/config/custom_components/audiconnect/audi_connect_account.py", line 105, in update
    vehicles_response = await self._audi_service.get_vehicle_information()
  File "/config/custom_components/audiconnect/audi_services.py", line 129, in get_vehicle_information
    "https://msg.audi.de/myaudi/vehicle-management/v1/vehicles"
  File "/config/custom_components/audiconnect/audi_api.py", line 54, in get
    r = await self.request(METH_GET, url, data=None, headers=self.__get_headers())
  File "/config/custom_components/audiconnect/audi_api.py", line 46, in request
    message=response.reason,
aiohttp.client_exceptions.ClientResponseError: 401, message='Unauthorized', url='https://msg.audi.de/myaudi/vehicle-management/v1/vehicles

First off great project, its working almost perfectly for me.

When I attempt a lock/unlock I am getting an error in the Home Assistant Log:

Logger: custom_components.audiconnect.util
Source: custom_components/audiconnect/util.py:25
First occurred: 1:55:31 PM (1 occurrences)
Last logged: 1:55:31 PM

Unable to unlock wauzzzXX: 403, message='Forbidden', url='https://mal-1a.prd.ece.vwg-connect.com/api/rolesrights/authorization/v2/security-pin-auth-completed

It happens each time I unlock/lock from home assistant, and the car does not lock/unlock.

I can lock unlock from the myAudi App, and everything else is working fine.

I have also entered S-PIN in my setup which I guess is what is providing the lock operation.

Hope this helps!

Thanks

Not really an issue, but I was wondering two things?

• Is it possible to change the "scan_interval" setting after a successful installation?
• Is it possible to change the heater timer? Now it seems to default to 10 minutes

I have integrated Audi connect into HA without a problem. Thanks for that.
I noticed a glitch that the car device tracker device_tracker.audi_* is showing not_home. I think this is because the coordinates have to be in a format. In configuration.yaml I have for instance latitude: 52.4 but in the device tracker I see latitude: 524xxxxx without the dot. Can you please convert the latitude and longitude?

BTW: Can more attributes like the gas percentage be also added?

Thanks,
Daniel

Great feature!! Good work.
How can I change my password or PIN. The only way I found so far is te remove the integration, restart homeassistant and then reinstall integration. Is it possible to configure the username and password somewere so you can change it in an easy way? Or is it possible to start the dialog to enter the username and password and etc.

Hello
It seems that something isn't working again:

It stopped working this afternoon.

I can login with the Audi App on my phone, but not Home Assistant.

I had removed and reinstalled the integration before all my entities were unavailable up until I reinstalled it, now I cannot log in.

I think it may be something to do with home assistant generally though because at the same time my colleagues BMW connected drive has started doing the exact same thing. Could it be some kind of authentication error globally on Home Assistant?

home-assistant/core#42139

I don't seem to be able to get the logs from my HA to be able to post them, from earlier.

Thanks

Shunts...

Hi,
trying to get audi_connect to work - but get the error messages shown below.
My A3 is connected to "my audi" and I can track location data etc. using the audi app - so the connection is available.

My setup is
hass.io: 0.94.3
audi_connect_ha: all files updates as pr. today

configuration.yaml:
(have tried without "region", with EU, with DA, and DK - no difference - and yes, I checked my VIN number a zillion times).

Any suggestions what could be the problem?

Regards,
Chr.

audiconnect:
  username: '[not_published_here]'
  password: '[not_published_here]'
  region: EU
  scan_interval:
    minutes: 2
  name:
    [not_published_here]: 'Audi A3'

API error: {'errorCode': 'batterycharge.bs.entitynotfound', 'description': "entity '[not_published_here]' not found."}
7:57 PM custom_components/audiconnect/audi_connect_account.py (ERROR) - message first occured at 7:55 PM and shows up 2 times
API error: {'errorCode': 'CF.security.9007', 'description': 'The service: carfinder_v1 for VIN: [not_published_here] could not be found.'}
7:57 PM custom_components/audiconnect/audi_connect_account.py (ERROR) - message first occured at 7:55 PM and shows up 2 times
API error: {'errorCode': 'VSR.security.9007', 'description': 'The service: statusreport_v1 for VIN: [not_published_here] could not be found.'}
7:57 PM custom_components/audiconnect/audi_connect_account.py (ERROR) - message first occured at 7:55 PM and shows up 2 times

Hi!
My last update time is correct in case of car connection, if the car is parking the time change to "0002-11-28 00:00:00", after driving it is correct again till parking.
Is there a way to display the last updatet time all the time?

Hi,
I have HASSIO 0.117.2; I installed this integration using HCAS, but now I don't it in HACS and if I go to:

Configuration->Integrations, click + and search for Audi Connect

I don't found anything...

you can help me?

I'm trying to use this component with my 2018 Audi S5 and it looks like none of the attributes are supported:

2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] Setting up dashboard with config :{}
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Position (Position:position) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Last Update (Sensor:last_update_time) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Mileage (Sensor:mileage) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Range (Sensor:range) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Service inspection time (Sensor:service_inspection_time) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Service inspection distance (Sensor:service_inspection_distance) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Oil change time (Sensor:oil_change_time) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Oil change distance (Sensor:oil_change_distance) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Oil level (Sensor:oil_level) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Charging state (Sensor:charging_state) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Max charge current (Sensor:max_charge_current) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Engine 1 (Sensor:engine_type1) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Engine 2 (Sensor:engine_type2) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Parking light (BinarySensor:parking_light) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Windows (BinarySensor:any_window_open) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Doors (BinarySensor:any_door_unlocked) is not supported
2019-05-27 08:38:07 DEBUG (MainThread) [custom_components.audiconnect.dashboard] <VIN> Trunk (BinarySensor:trunk_unlocked) is not supported

I don't have an active Audi Connect subscription, but those items became free last year and I can see those items in the MyAudi app. Is an Audi Connect subscription required to use this API?

In the recent version of Home Assistant brands (logos) of integrations are shown when adding new or view details - home-assistant/frontend#5500
It would be awesome to see the Audi logo there.
More info: https://developers.home-assistant.io/blog/2020/05/08/logos-custom-integrations/

Hello,

I added debug logging and also added a loggning during requestStatus to see what answers we get.
This because i have issues with my car updating, this is an Audi issue, but when this happens i think that the code gets a success when a timeout really happens.
This is an example log.
2020-03-10 10:56:39 DEBUG (MainThread) [custom_components.audiconnect.audi_connect_account] Sending command to refresh data to vehicle <DELETED> 2020-03-10 10:56:50 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:57:01 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:57:11 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:57:21 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:57:32 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:57:43 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:57:54 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:58:04 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:58:15 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:58:26 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:58:26 DEBUG (MainThread) [custom_components.audiconnect.audi_connect_account] Successfully refreshed data of vehicle <DELETED> 2020-03-10 10:58:39 DEBUG (MainThread) [custom_components.audiconnect.audi_connect_account] Sending command to refresh data to vehicle <DELETED> 2020-03-10 10:58:54 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_in_progress'}} 2020-03-10 10:59:04 DEBUG (MainThread) [custom_components.audiconnect.audi_services] {'requestStatusResponse': {'vin': '<DELETED>', 'status': 'request_successful'}} 2020-03-10 10:59:04 DEBUG (MainThread) [custom_components.audiconnect.audi_connect_account] Successfully refreshed data of vehicle <DELETED>

As you see the first try never gets a 'request_successful' but still says it does.

BTW. Thank you for the great work. I have bought you a beer :)

Would you mind saving a copy of the cardbackK.png file used in your Lovelace example somewhere please?
Thanks.

I live in North America, I see that you say we need a region but dont give an example, I tried using region: na but I am not seeing any sensors, also not seeing any errors in the log, what's the best way to trouble shoot this?

Looks like the recent update to fix logging into Audi Connect for non-US(?) users (#40) broke my ability to login to Audi Connect. Up until this latest update, everything was working fine.

I applied the update via HACS, restarted HA and the integration failed to pull any information for my car. I deleted the integration for HA and deleted this component from HACS then re-installed it fresh via HACS. Restarted HA and then went to add the integration back to HA. I filled in all the info, hit submit and then received an auth failure message.

I reverted back to the b85121a commit from May 26, 2020 by manually removing the latest version HASC installed in the custom_components folder and copying b85121a files in place. Reboot HA and then re-added the integration in HA and this time after submitting my information it worked. No auth issues and my status card for my car is showing information once again.

Since the login changes, stopping the preheater gives an error. Starting it still works.

"Unable to stop pre-heater of vehicle wauzzxxxxxxxxxxxx: 400, message='Bad Request', url=URL('https://msg.volkswagen.de/fs-car/bs/rs/v1/Audi/DE/vehicles/WAUZZxxxxxxxxxxxx/action')

Just got this setup and dialed in (way awesome by the way), is there anyway to change it to deliver Miles and such instead of metric units?

If I use the wrong login credentials, I get this traceback:

2019-05-27 08:08:31 INFO (MainThread) [homeassistant.setup] Setting up audiconnect
2019-05-27 08:08:32 ERROR (MainThread) [homeassistant.setup] Error during setup of component audiconnect
Traceback (most recent call last):
  File "/usr/local/lib/python3.7/site-packages/homeassistant/setup.py", line 153, in _async_setup_component
    hass, processed_config)
  File "/config/custom_components/audiconnect/__init__.py", line 101, in async_setup
    password=config[DOMAIN].get(CONF_PASSWORD))
  File "/config/custom_components/audiconnect/audi_connect_account.py", line 30, in __init__
    self.logon_service.login(username, password)
  File "/config/deps/lib/python3.7/site-packages/audiapi/Services.py", line 190, in login
    token = self.__login_request(user, password)
  File "/config/deps/lib/python3.7/site-packages/audiapi/Services.py", line 220, in __login_request
    reply = self._api.post(self.url('/token'), data, use_json=False)
  File "/config/deps/lib/python3.7/site-packages/audiapi/API.py", line 62, in post
    return self.__handle_error(r.json())
  File "/config/deps/lib/python3.7/site-packages/audiapi/API.py", line 68, in __handle_error
    raise Exception('API error: ' + str(error) + '\n' + error_msg)
Exception: API error: invalid_grant
Bitte überprüfen Sie Ihre eingegebenen Daten.

Doesn't happen with the correct credentials, but the exception should be caught.

i have a lot ot translation warnings since 109.x , i think an update is needed ....

020-04-29 19:14:31 WARNING (MainThread) [homeassistant.helpers.translation] audiconnect: the '.translations' directory has been moved, the new name is 'translations', starting with Home Assistant 0.111 your translations will no longer load if you do not move/rename this 
2020-04-29 19:14:31 WARNING (MainThread) [homeassistant.helpers.translation] audiconnect: the '.translations' directory has been moved, the new name is 'translations', starting with Home Assistant 0.111 your translations will no longer load if you do not move/rename this 
2020-04-29 19:14:31 WARNING (MainThread) [homeassistant.helpers.translation] audiconnect: the '.translations' directory has been moved, the new name is 'translations', starting with Home Assistant 0.111 your translations will no longer load if you do not move/rename this 
2020-04-29 19:14:31 WARNING (MainThread) [homeassistant.helpers.translation] esxi_stats: the '.translations' directory has been moved, the new name is 'translations', starting with Home Assistant 0.111 your translations will no longer load if you do not move/rename this 
2020-04-29 19:14:31 WARNING (MainThread) [homeassistant.helpers.translation] esxi_stats: the '.translations' directory has been moved, the new name is 'translations', starting with Home Assistant 0.111 your translations will no longer load if you do not move/rename this 
2020-04-29 19:14:31 WARNING (MainThread) [homeassistant.helpers.translation] audiconnect: the '.translations' directory has been moved, the new name is 'translations', starting with Home Assistant 0.111 your translations will no longer load if you do not move/rename this 
2020-04-29 19:14:31 WARNING (MainThread) [homeassistant.helpers.translation] audiconnect: the '.translations' directory has been moved, the new name is 'translations', starting with Home Assistant 0.111 your translations will no longer load if you do not move/rename this 
2020-04-29 19:14:31 WARNING (MainThread) [homeassistant.helpers.translation] audiconnect: the '.translations' directory has been moved, the new name is 'translations', starting with Home Assistant 0.111 your translations will no longer load if you do not move/rename this

ok, installed this component, all was working fine, i had a device tracker
now after a restart, all sensors are OK, but seems the device tracker = source_type: null

so doesnt update anymore?

i see n log files this : 2019-08-23 17:43:39 ERROR (MainThread) [custom_components.audiconnect.audi_connect_account] Expecting value: line 1 column 1 (char 0)

not sure if its related?

Hi, really like this component and it works perfectly. I used default refresh interval at setup but would like to change it now. Is there a way to do so? Ideally I modify it dynamically or use the refresh service triggered by an external event (I failled to get the right syntax since I guess I am too newbie), i undertand something with VIN is missing...

type: button
tap_action:
action: call-service
service: audiconnect.refresh_vehicle_data
hold_action:
action: more-info
show_icon: true
show_name: false
entity: input_boolean.get_car_update

Anyone else seeing this in their logs?

Unable to update the vehicle position of WAUvinremvoed: 204, message='No Content', url='https://msg.volkswagen.de/fs-car/bs/cf/v1/Audi/US/vehicles/WAUvinremoved/position

I noticed there is the code for set_battery_charger in audi_services.py that wasn't exposed as an action to Home Assistant. Being able to control when our car charges is a big win over the simple scheduling offered by Audi and opens the possibility of charging...

• when time of use electricity rates are low
• outside grid peak demand periods
• when local solar production has excess

The good news is that I can confirm the api call to both start and stop charging works on our A3 Etron after coding up start_charging / stop_charging actions using start_climatisation as a template. is this something you are planning to add in a future update, or would you be agreeable for me to issue a Pull request with my changes.

Regards,
Iain

With the new upgrade I get a lot of errors in my log. It also seems to lock up Hassio when the occur (I edited out some potentially sensitive data):

Error saving event: <Event audiconnect_refresh_vehicle_data_completed[L]: vin=EDITED> 18:36 components/recorder/__init__.py (ERROR)

Error executing query: (MySQLdb._exceptions.DataError) (1406, "Data too long for column 'event_type' at row 1") [SQL: INSERT INTO events (event_type, event_data, origin, time_fired, created, context_id, context_user_id) VALUES (%s, %s, %s, %s, %s, %s, %s)] [parameters: ('audiconnect_refresh_vehicle_data_completed', '{"vin": "EDITED"}', 'LOCAL', datetime.datetime(2019, 8, 13, 16, 36, 7, 656247, tzinfo=<UTC>), datetime.datetime(2019, 8, 13, 16, 36, 7, 738772), 'EDITED', None)] (Background on this error at: http://sqlalche.me/e/9h9h) 18:36 components/recorder/util.py (ERROR)

Unhandled exception 18:36 /usr/local/lib/python3.7/site-packages/aiohttp/web_protocol.py (ERROR) - message first occured at 18:36 and shows up 3 times

websocket connection is closing. 18:36 components/websocket_api/http.py (WARNING)

Ignoring data because we're disconnected! 18:36 __main__.py (WARNING)

Got empty response. We think it's disconnect. 18:36 __main__.py (WARNING) - message first occured at 18:31 and shows up 2 times

Got exception: 0 bytes read on a total of None expected bytes. Most likely the other side has disconnected! 18:36 __main__.py (WARNING) - message first occured at 18:31 and shows up 2 times

API error: {'errorCode': 'gw.error.timeout', 'description': 'Backend Connection Timeout'} 18:36 custom_components/audiconnect/audi_connect_account.py (ERROR) - message first occured at 18:31 and shows up 2 times

Solved

I connected to myAudi account, but it only generated 2 entities (Car model and lock). Locking/unlocking fails, refreshing the data fails as well. Log entries:

2020-10-27 09:15:43 ERROR (MainThread) [custom_components.audiconnect.util] Unable to refresh vehicle data of <vinsnipped>: 403, message='Forbidden', url=URL('https://msg.volkswagen.de/fs-car/bs/vsr/v1/Audi/DE/vehicles/<vinsnipped>/requests')
2020-10-27 09:15:43 ERROR (MainThread) [custom_components.audiconnect.audi_account] Error refreshing vehicle data <vinsnipped> NoneType: None

With the latest update I am getting these entries in the Log:

Logger: homeassistant.components.binary_sensor
Source: components/binary_sensor/init.py:139
Integration: Binary Sensor (documentation, issues)
First occurred: 17:08:00 (1 occurrences)
Last logged: 17:08:00

BinarySensorDevice is deprecated, modify AudiSensor to extend BinarySensorEntity

WARNING (MainThread) [homeassistant.components.lock] LockDevice is deprecated, modify AudiLock to extend LockEntity

Any ideas how to resolve? - it seems to be working for now!

Thanks

It would seem that Audi has changed the login over the last maintenance period, and the integration is no longer able to login.

Log Details (ERROR)
Logger: custom_components.audiconnect.audi_connect_account
Source: custom_components/audiconnect/audi_connect_account.py:93
Integration: Audi Connect (documentation)
First occurred: August 10, 2020, 8:19:13 AM (777 occurrences)
Last logged: 6:35:25 AM

Login to Audi service failed, trying again in 10 seconds
Login to Audi service failed: 400, message='', url='https://id.audi.com/v1/token

Everything was fine with my car yesterday, but today after the maintenance I can no longer login, incidentally when I attempt to login via myAudi, the login is different and after the maintenance the existing session was logged out, with a session expired message.

I guess that is what is causing this on login attempts.

Up until today, it has worked flawlessly for me, (albeit with trouble caused only by me!)

Hope this helps

Shunts...

Hi team, just installed Audi connect on a brand new Home Assistant installation. The Audi connect integration finds only 1 entity (name, model etc). I have another raspberrypi with home assistant and there all works well and I see 21 entities. Any idea what i'm doing wrong?

Log Details (WARNING)
Logger: homeassistant.helpers.entity
Source: helpers/entity.py:443
First occurred: 1:42:31 AM (1 occurrences)
Last logged: 1:42:31 AM

Entity sensor.audi_a6_avant_model is incorrectly being triggered for updates while it is disabled. This is a bug in the audiconnect integration.

Hi, first of all big thanks for this integration. I love it and use it all the time. Well i used to.
I moved to a new raspberry pi setup and rebuilt everything from scratch.
I just cant find the Audi Connect integration.
Any idea why this could be happening?
Thx!

Hello,

this week I started to have an issue with login:

Login to Audi service failed: 403, message='Forbidden', url=URL('https://app-api.my.audi.com/myaudiappidk/v1/token')

It is not possible to login to myaudi account. I have tried to remove the integration and fill in login credentials again but now it I get message: Invalid credentials

I am able to log in to my audi account on address: my.audi.com without any issue.

Unable to control car. Have spin with setup and was working before. This started a few days ago. Tried removing and reinstalling the integration as well.

Error code:

Unable to unlock : invalid literal for int() with base 16: 'R5'
Unable to update vehicle data of : Timeout error

Thanks!

Hey Arjen,

Sending along a VIN number when sending data isn't working for me.
So far I have this, which should be valid.

{ "action": "call_service", "service": "audiconnect.execute_vehicle_action", "action": "unlock" }

How can i send along the VIN number?

Kind regards,
Track

Hi

Is anyone getting the same problem, it looks like this has stopped working for me.

Traceback (most recent call last): File "/usr/src/homeassistant/homeassistant/config_entries.py", line 220, in async_setup hass, self File "/config/custom_components/audiconnect/__init__.py", line 106, in async_setup_entry return await data.update(utcnow()) File "/config/custom_components/audiconnect/audi_account.py", line 158, in update if not await self.connection.update(None): File "/config/custom_components/audiconnect/audi_connect_account.py", line 105, in update vehicles_response = await self._audi_service.get_vehicle_information() File "/config/custom_components/audiconnect/audi_services.py", line 125, in get_vehicle_information "https://msg.audi.de/myaudi/vehicle-management/v1/vehicles" File "/config/custom_components/audiconnect/audi_api.py", line 54, in get r = await self.request(METH_GET, url, data=None, headers=self.__get_headers()) File "/config/custom_components/audiconnect/audi_api.py", line 46, in request message=response.reason, aiohttp.client_exceptions.ClientResponseError: 502, message='Bad Gateway', url='https://msg.audi.de/myaudi/vehicle-management/v1/vehicles

This is all that I am getting in the logs.

I removed and reinstalled the integration but it still fails, working perfectly up until today, my Audi is still working fine though.

Thanks