Read smart Luxembourgish electricity and gaz counter values with ESP8266.
In Luxembourg, electricty and gas counters are being replaced with smart counters that allow the provider to remotely measure consumption values. A special port is provided to allow the end-user to capture the data, for example for integration with home automation systems.
This work is a fork of the awesome project by Guy WEILER who did all the hard work on both the software and hardware side. Please review Guy's website for technical details on the solution, PCB layout, etc.
- publish all values from the electricity counter to MQTT in their own topic
- units are published as well in a separate topic for easy of interpretation
- if a gas counter is connected to the electricity counter, gas volume is published as well (implemented but not tested yet)
- possibility to work without a counter from a data capture to make quick tests when adding new features
- extensive logging available on the second UART port (the first one is used by the counter)
- supports the smarty firmware as of April 2020 (more data points available, see below)
- A 'smarty' electricity meter
- Your personal decryption key, that you need to ask from the provider Creos, giving them your counter number
- A Wimo D1 mini pro micro-controller and adaptation board. See Guy's website
root@54681c2ae65d:/# mosquitto_sub -t 'smarty/#' -v
smarty/act_pwr_p_minus_l1/value 00.000
smarty/act_pwr_p_minus_l2/value 00.000
smarty/act_pwr_p_minus_l3/value 00.000
smarty/act_pwr_p_plus_l1/value 00.384
smarty/act_pwr_p_plus_l2/value 00.123
smarty/act_pwr_p_plus_l3/value 00.434
smarty/apparent_export_pwr/value 00.000
smarty/apparent_import_pwr/value 01.162
smarty/broker_ctrl_state_1/value 0
smarty/broker_ctrl_state_2/value 0
smarty/elec_failures/value 00340
smarty/elec_sags_l1/value 00009
smarty/elec_sags_l2/value 00009
smarty/elec_sags_l3/value 00009
smarty/elec_swells_l1/value 00000
smarty/elec_swells_l2/value 00000
smarty/elec_swells_l3/value 00000
smarty/elec_switch_postn/value 1
smarty/elec_threshold/value 027.6
smarty/energy_delivered_tariff1/value 011634.750
smarty/energy_returned_tariff1/value 000000.240
smarty/equipment_id/value SAG1030123456789
smarty/gas_index/value (null)
smarty/limiter_curr_monitor/value 040
smarty/msg_short/value (null)
smarty/msg2_long/value (null)
smarty/msg3_long/value (null)
smarty/msg4_long/value (null)
smarty/msg5_long/value (null)
smarty/p1_version/value 42
smarty/phase_curr_l1/value 002
smarty/phase_curr_l2/value 000
smarty/phase_curr_l3/value 002
smarty/phase_volt_l1/value 231.0
smarty/phase_volt_l2/value 230.0
smarty/phase_volt_l3/value 229.0
smarty/pwr_delivered/value 00.942
smarty/pwr_returned/value 00.000
smarty/react_energy_delivered_tariff1/value 000012.757
smarty/react_energy_returned_tariff1/value 006148.356
smarty/react_pwr_delivered/value 00.000
smarty/react_pwr_q_minus_l1/value 00.000
smarty/react_pwr_q_minus_l2/value 00.000
smarty/react_pwr_q_minus_l3/value 00.000
smarty/react_pwr_q_plus_l1/value 00.000
smarty/react_pwr_q_plus_l2/value 00.000
smarty/react_pwr_q_plus_l3/value 00.000
smarty/react_pwr_returned/value 00.000
smarty/timestamp/value 200423122938S
- Download and install PlatformIO. I did not test it with the Arduino IDE.
- Open the project in PlatformIO
- Copy the file
include/smarty_user_config_sample.htoinclude/smarty_user_config.hand adjust it to your needs (WiFi settings, decription key, MQTT server). - Build and program the Wimo
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent