In this repository, I've included all things that I used to build my small Hackintosh.
| Components | Model | Working? |
|---|---|---|
| Motherboard | Gigabyte B460M D2V | Yes |
| CPU | Intel i3-10100 | Yes |
| GPU (Integrated) | Intel® UHD Graphics 630 | Yes |
| GPU (External) | - | - |
| RAM | 2x8GB DDR-4 | Yes |
| NVMe (Boot Drive) | 128GB | Yes |
| SSD | - | - |
| HDD | - | - |
| Audio | ALC887 | Yes |
| Ethernet | Realtek® GbE LAN | Yes |
| Name | Version | Comments |
|---|---|---|
| OpenCore | 0.6.6 | - |
| VirtualSMC | 1.2.0 | - |
| Lilu | 1.5.1 | - |
| WhateverGreen | 1.4.7 | - |
| AppleALC | 1.5.7 | - |
| IntelMausi | 1.0.5 | Note: 1 |
| RealtekRTL8111 | 2.4.0 | Note: 1 |
| USBInjectAll | - | - |
| XHCI-unsupported | - | - |
Notes
- Maybe this is not required, I forget to delete. I will check it later.
- You need to setup: Network -> Ethernet -> Advanced -> Hardware (Configure: Manually, Speed: 100baseTX, Duplex: full-duplex, MTU: Standard (1500))
| Name | Status | Comments |
|---|---|---|
| VT-D | Disabled | - |
| DVMT Pre-Allocated | 64M | - |
| DVMT Total Gfx Mem | 256M | - |
| Aperture Size | 256MB | - |
| Avobe 4G Decoding | Enabled | - |
| Serial Port | Disabled | - |
| Legacy USB Support | Disabled | - |
| XHCI Hand-off | Enabled | - |
| Network Stack | Disabled | - |
| SATA Mode Selection | AHCI | - |
| Fast Boot | Disable Link | - |
| Windows 10 Features | Other OS | - |
| CSM Support | Disabled | - |
| Secure Boot | Disabled | - |
Download the latest version of macOS Big Sur from the App Store. You will need a USB flash drive with at least 16GB. You will need to format the disk using Disk Utility with Format Mac OS Extended (Journaled) and Scheme GUID Partition Map. After the disk is formatted run the command below to prepare the disk. Please replace YOUR_FLASH_DRIVE_NAME_HERE with your newly formatted flash drive name.
sudo /Applications/Install\ macOS\ Big\ Sur.app/Contents/Resources/createinstallmedia --volume /Volumes/YOUR_FLASH_DRIVE_NAME_HERE
You will need to mount the EFI partition to make copy EFI files from this repository. To Mount EFI partition you may use Mount EFI tool.
After mounting the EFI drive, Please copy all files from EFI to your newly mounted EFI drive. Now you can configure the EFI/OC/config.plist file with your own/fake PlatformInfo. To generate PlatformInfo you can use GenSMBIOS.
Do all BIOS setup things listed above and boot the flash drive.
Now, I can say "Best Of Luck!" only.
Happy Hacking!
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent