#MeteoroLog: just another mini weather station
SD-Card Reader (Arduino SD-Library compatible, chipSelect=10)
https://www.arduino.cc/en/Reference/SD
RTC DS1307 IC with battery (DS1307RTC Library compatible)
http://playground.arduino.cc/code/time
The circuit:
* SD card attached to SPI bus as follows:
* MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila
* MISO - pin 12 on Arduino Uno/Duemilanove/Diecimila
* CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila
* CS - depends on your SD card shield or module (chipSelect=10).
https://github.com/adafruit/DHT-sensor-library
https://github.com/adafruit/Adafruit\_BMP085\_Unified
SDA --> analog 4
SCL --> analog 5
VIN --> 3.3V DC Warning!!!
GND --> Ground
GND --> Ground
ADD --> Ground
SDA --> analog 4
SCL --> analog 5
VCC --> 3.3V DC Warning!!!
- Install dependencies:
$ sudo apt install python-pip
$ pip install pyserial
$ chmod u+x meteorolog.py
$ ./meteorolog.py