adsblol / feed Goto Github PK

Is there a way to configure my existing system that is already running a dump1090 setup to feed direct to adsb.lol without this container system. My setup is currently on a cloud Linux system that has atcp pipe to my pi via VPN and pulls from my pi via VPN because of Cox port blocking. It's loaded as a net-only dump1090 which thinks it's getting the data directly from the SDR.

when I follow these instructions I get errors on the listen 30003 already in use

A manual (non-script-based) installation w/ systemd services isn't too hard and may appeal to some people more than a Docker-based installation, plus it helps to understand how data flows between readsb/MLAT-client for the curious.

We may add of course that it's not the recommended way

Dear all,
I wanted to feed to ADSBlol so as per the instructions (https://www.adsb.lol/docs/hardware/adsb-equipment/) I ordered an AirNav RadarBox FlightStick and the pertaining antenna. Initially I tried the 'bare metal' command line approach but since I could not get it working I switched to the approach of using an adsb-feeder-image (https://adsb.im/howto). I followed all the steps but after the html dashboard page where I select the aggregators I want to feed to, the following page and after a couple of minutes the following html alert appears:

Is there any easy solution to this? I have to admit that Im unsure what it means. If for context purposes it is of any help, this is my hardware (so flight hardware as stated above, RPi is the Zero 2W. Kitchen environment only temporary location for testing - please ignore the kiwifruit)

If anybody has a solution to this, please let me know, greatly appreciated :) Thanks!
Sebastiaan.

First off thank you all very much for this project and your work. I'm having fun modifying my existing ads-b receiver (raspberry pi with fr24), and I'm trying to use the bare metal setup instructions per the documentation.

When I run the install scripts it seems to make it most of the way through but then fails, and the git errors I'm seeing indicate a head issue or current working directory issue (based on my researching the errors, I am definitely not a git expert and have only used it a few times, not much troubleshooting experience with git specifically). Here's what I'm seeing right now:

jay@adsb:~ $ curl -fsL -o /tmp/adsblol.sh https://adsb.lol/feed.sh && sudo bash /tmp/adsblol.sh
/home/jay /home/jay
remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0
From https://github.com/adsblol/feed
 * branch            master     -> FETCH_HEAD
HEAD is now at 7254a27 Update configure.sh
/home/jay
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Note, selecting 'libncurses-dev' instead of 'ncurses-dev'
build-essential is already the newest version (12.9).
curl is already the newest version (7.74.0-1.3+deb11u11).
git is already the newest version (1:2.30.2-1+deb11u2).
libncurses-dev is already the newest version (6.2+20201114-2+deb11u2).
libzstd-dev is already the newest version (1.4.8+dfsg-2.1+rpi1).
libzstd1 is already the newest version (1.4.8+dfsg-2.1+rpi1).
ncurses-bin is already the newest version (6.2+20201114-2+deb11u2).
python3-dev is already the newest version (3.9.2-3).
python3-venv is already the newest version (3.9.2-3).
socat is already the newest version (1.7.4.1-3).
unzip is already the newest version (6.0-26+deb11u1).
uuid-runtime is already the newest version (2.36.1-8+deb11u2).
wget is already the newest version (1.21-1+deb11u1).
zlib1g is already the newest version (1:1.2.11.dfsg-2+deb11u2).
zlib1g-dev is already the newest version (1:1.2.11.dfsg-2+deb11u2).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
remote: Total 0 (delta 0), reused 0 (delta 0), pack-reused 0
From https://github.com/adsblol/feed
 * branch            master     -> FETCH_HEAD
4
Checking and installing prerequesites ...

Using existing valid UUID (c5e4cb35-23a0-4401-b3f6-21fbb79edbdd) from /usr/local/share/adsblol/adsblol-uuid

mlat-client already installed, git hash:
efcb206fb88203d8a672b41ba3c1941f7a3f3050

50
60
70

Compiling / installing the readsb based feed client

72
74
fatal: not a git repository (or any of the parent directories): .git
rm -f *.o uat2esnt/*.o compat/clock_gettime/*.o compat/clock_nanosleep/*.o readsb viewadsb cprtests crctests convert_benchmark
fatal: not a git repository (or any of the parent directories): .git




^Cmake: *** [Makefile:139: json_out.o] Interrupt
make: *** [Makefile:139: net_io.o] Interrupt

Any advice? Thanks in advance!

Hi, I wish not to use docker on my linux machine. Please create a git clone webpage. The curl command does not include the adsblol-update or adsblol-up binaries.
Thank you