adguardteam / adguardvpncli Goto Github PK

Run curl and commands under Linux in my Steam Deck. It works great!

Adguard distrib:
adguardvpn-cli-0.99.45-linux-x86_64

Linux OS params:
Operating System: SteamOS
Kernel: Linux 6.1.52-valve16-1-neptune-61
Architecture: x86-64
Hardware Vendor: Valve
Hardware Model: Jupiter
Firmware Version: F7A0120
Firmware Date: Fri 2023-12-01

Application version: adguardvpn-cli-0.99.18-linux-x86_64

Problem description:

• Application crashes on startup
• Error message: "Illegal instruction (core dumped)"
• Possible cause: CPU does not support AVX instructions
• dmesg output:
  traps: adguardvpn-cli[36179] trap invalid opcode ip:68ff20 sp:7ffdae3560b0 error:0 in adguardvpn-cli[400000+b95000]

As is said in the title, I'd like to request OpenBSD to be added to the list of supported operating systems.

Please answer the following questions for yourself before submitting a question.

• I am running the latest version
• I checked to make sure that this issue has not already been filed

Ask a question

should I be expecting CLI for windows and macOS as well ?

Please answer the following questions for yourself before submitting a question.

• I am running the latest version
• I checked to make sure that this issue has not already been filed

Ask a question

is there a command to check the remaining traffic on your account?

Please answer the following questions for yourself before submitting a question.

• I am running the latest version
• I checked to make sure that this issue has not already been filed

Ask a question

I setup socks mode, but when I setup a proxy to 127.0.0.1:1080. it doesn't work.

root@vultr:~# adguardvpn-cli config show
Current configuration:
	Mode: socks
	Socks port: 1080
	DNS upstream: Default (provided by AdGuard VPN)
	No routes: on
	Set system DNS: off
	Send crash: on
	Update channel: BETA
	Show hints: Default (on)
	Debug logging: on
root@vultr:~# 

Imagine a situation like this:

1. I run the VPN client on a cloud server.
2. It is configured to operate in VPN mode and add routes automatically.
3. I run adguardvpn-cli connect, it sets up routing rules and it immediately breaks my SSH session to the server.
4. So incoming SSH connections to the server stay broken.

Can we use some solutions from this thread automatically?
https://www.reddit.com/r/WireGuard/comments/nglt05/ssh_tunnel_breaks_when_connecting_to_vpn/

Please answer the following question for yourself before submitting an issue

• I checked to make sure that this issue has not already been filed

AdGuard VPN CLI version

1.0

Environment

• OS:
  Simply Linux x64

Issue Details

Steps to reproduce:

1. curl -fSsL ...
2. gpg --keyserver 'keys.openpgp.org' --recv-key '28645AC9776EC4C00BCE2AFC0FE641E7235E2EC6'

Expected Behavior

I don't know what's going to happen

Actual Behavior

gpg: запрашиваю ключ 235E2EC6 с сервера hkp keys.openpgp.org
gpgkeys: key 28645AC9776EC4C00BCE2AFC0FE641E7235E2EC6 can't be retrieved
gpg: не найдено данных формата OpenPGP.
gpg: Всего обработано: 0
gpg: ошибка связи с сервером ключей: keyserver helper general error
gpg: ошибка связи с сервером ключей: неизвестный алгоритм с открытым ключом
gpg: сбой при получении с сервера ключей: неизвестный алгоритм с открытым ключом

Screenshots

Additional Information

No response

You forgot to push the source code.

Please answer the following questions for yourself before submitting a question.

• I am running the latest version
• I checked to make sure that this issue has not already been filed

Ask a question

should I be expecting CLI for windows and macOS as well ?

Issue Details

Enrich the list-locations subcommand by adding a country filter

Proposed solution

Improve the install.sh

Alternative solution

Ignore me

Issue Details

When I type the adguardvpn-cli subcommand on the command line, I have to type it in full. It's not very user friendly. For example, this is how I suffer:

Please allow me to use your command-line VPN client the same way I use grep:

Proposed solution

Improve the install.sh

Alternative solution

Ignore me

We should switch sudo mode in this case

Currently adguardvpn-cli only listens on localhost address.