This Repository is Designated for the Final project of CS-207 - Building interactive Gadgets. This projects is a an automated Robot that blows bubbles when turned on, it uses 2 Servos and 5 DC Motors with Fans attached, all this is programmed using the Arduino Uno.
The Robot works by having the two servos one has a ring attached to it that goes up and down to dip the ring in the soapy water, while the other servo moves to position the ring infront of the DC motor for it to make the bubbles.
/Project Documents. - This folder Contains the Documents of the Project, (The proposal and the Write-up).
/ProjectinMotion - This Folder contains a video and pictures of the Project in Motion when it's done.
- 1X Arduino Uno (other types can be used).
- 5X DC Motors Fans.
- 4X 12V DC Motors.
- 1X 5V DC Motor.
- 1X Diode
- 1X Transistor
- 2X Micro Servos.
- 1X PotentioMeter.
- 1X 2.2kΩ resistor.
- 1x Bubble-Mix.
- 1x metal angle.
- 1X Glue Gun.
- Glue sticks as needed.
- 1X small wooden Pallet.
- 2X plastic Cups.
- Wires (I used around 20).
- Extention Wires ( I used around 8).
- 1X Towel.
- 1X Metal hinge.
- To build the Bubble making Robot, you would need the connect the Hardware in the following way:
- Please Upload the code found on /Code on your Arduino uno.
- Fill the Plastic cups with the soapy water.
- Connect the Arduino uno with the USB cable or with AC-DC adapter.
- Enjoy the Bubbles
- Adam Halawani.
- Bernard Katz Glass from http://www.instructables.com/id/Bubblesteen-Bubble-Machine/
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent