acai66 / lenovo-miix-520-hackintosh Goto Github PK

首先感谢。
kernel→quirks中，如何确定自己的设备应该将属性AppleCpuPmCfgLock和AppleXcpmCfgLock的值设为true。
我之前将这两项为默认值false，会卡住，直到看见了你的配置文件后将这两项设置为true后可以启动。

你好，我使用虚拟机安装big sur后单启动苹果系统正常，但是oc无法引导进windows 后来发现是miix520美版指纹的那个补丁造成的，我大概判断你可能是黑苹果单系统，所以没有，后来我把那个补丁屏蔽掉后可以正常进入windows和mac，但是Linux貌似因为天生原因无法引导。不知道能不能指导一下

楼主你好，我更换了bcm94352z网卡之后重装的10.15正式版系统，我路由5gwifi的信道是44，搜不到，更换到149/153，可以搜到了，但是怎么都连不上。2.4g正常。而且iwatch解锁开启了以后也无法实现解锁，不知道楼主有没有同样的问题？搜索不出来同样的问题，不知道该怎么解决。。

楼主您好，
有外接显示器的需求，请问这个黑苹果可以通过TypeC拓展坞外接显示器吗，是否有什么BUG之类？
感谢。

I can enter the installer but it stops at 2 min and reboots right away. And then I cannot enter the mac again. Maybe it is the problem of the sata mode. However, I cannot find the option to change my storage mode to ahci. How should I do?

按照你的教程，都无法实现唤醒，求解哪一环节出错

你好，我是远景过来的。不是同机型，但想请教bcm94352z蓝牙的问题。

下面我想说下我的问题：
蓝牙通过BrcmBluetoothInjector.kext驱动，能够正常开关，但经常搜不到信号。需要关机重启几次，或者进win开关蓝牙之类的操作后才能搜索到信号。

看到您的kext里面同时放了貌似冲突的驱动，见rehabman的readme

能否讲下你是如何驱动蓝牙的，谢谢了

Hi,

after following your instruction of deleting the appleIntelLpssI2C.kext and AppleIntelLpssI2CController.kext and run kext utility to rebuild your kextcache

my touch screen is still not working. also can you help me about my wifi adapter qualcom atheros qca61x4a its being detected by dpcimanager as QCA6174.

we have the same Lenovo Miix 520 but somewhat different spec. would appreciate your help thanks!

我最近想购入MIIX520,然后看了下官方配的是只有windows适配的蓝牙笔，大佬有没有什么笔推荐一下的？

I’m currently dual booting Windows 10 and Catalina with OpenCore 0.5.4 (the release version 2.0 of this repo), everything works fine but the default timeout boot OS is BOOTCAMP Windows, how can I change it to macOS?

I’ve tried choosing macOS as Startup Disk in Preferences pane but after that, the system freezes when clicking restart button and it doesn’t apply any setting. (Normal system restart works fine)

1.只要将显卡id改为19160000，声卡id修改为28即可，电源与休眠无需修改直接完美，触屏也完美，我可以引用您的配置来发布miix510的配置吗
2.我用的网卡是DW1820A 00JT494（联想版），wifi不用屏蔽针脚可驱动，但是蓝牙无法连接（表现为可搜索设备，连接后瞬间断连，且另一台设备没有任何连接成功的提示），这个是需要注入解决还是修改dsdt呢？
3.触控板在设置中能修改手势设置，但是触控板只能点按，触控板双指方向只朝向一个方向，这个需要修改哪里呢？
4.偶尔还是需要重新插拔键盘来唤醒键盘
5.dsdt与注入的区别是啥呢，哪些问题是可以通过dsdt解决的呢？

请问大神，i7-7500u应该怎么配置？

网上看到的，小米笔记可以，不知道miix可以不，能力有限，只会找帖子，其他全不会

今天油管看视频，调整了下亮度，视频上半部变黄了。。
真是很纳闷。
http://132.232.28.83/IMG_20190921_215054.jpg

如题，我的机器是mixx720，不知道能用这个方式安装么？

I installed Mojave and updated to Catalina and all it's working fine, except the touchscreen. The gestures with 3 and 4 fingers don't perform fine. For example, the 3 fingers up (mission control) works de 25% times. 3 fingers down doesn't work, 4 fingers gestures don't work, and 5 fingers (launch pad and desktop) work the 25% times. I updated the voodooI2C to 2.3 version but the problem still continues. In fact, the shortcuts are different to the results in the VoodooI2C official documentation. Any solution?

请问触摸板的多指操作BUG解决了吗？我试图按照readme里面的说明删了相关dict但是没有效果

您好 我使用来2.2版本的IOPENCORE引导 不能使用开机热键功能？

我的miix510修改后其他均可正常驱动,但是触屏及触屏手势均不能用.我把VoodooI2C.kext,VoodooI2CHID.kext,VoodooPS2Controller.kext换成旧版后触屏正常了.
是新版本兼容性的问题还是我设备的问题呢?

Hello, could someone please post working efi (including boot and clover) ?

尝试了最新的2.5beta，
1.引导u盘安装原版bigsur安装盘时出现startimage错误，但在config中加入booter-fileset-basesystem可以进入读进度条的阶段，然而会卡，-v显示有进程不断因进程数量过多而退出。
2.如果从系统（10.15.4）直接点击app升级，重启后在opencore会出现一个macOS Install的引导菜单，但无论加不加booter-fileset-basesystem都直接报startimage failed错误。
并且，如果加了booter-fileset-basesystem，也会导致原来的10.15.4也无法启动

另外，关于读卡器，我也是美版miix520，读卡器型号RTS5208，不在sinetek-rtsx支持的型号中。但考虑这个驱动最近更新到2.3版本了，加入了5209的支持，或许可以考虑将5208的id仿冒为5209试试？毕竟这两个型号在windows下共用驱动。

sleep log.pdf
@acai66 您好，我的bios目前為6ncn39ww , 想請問一下如何降級bios呢？ 目前網上找不到6ncn35ww的bios檔案，謝謝

另外之前說的，GLAN XDCI所引起的睡眠問題也在這個bios版本中碰到了，想提交一下我的dsdt , 看您有無方法處理，謝謝
origin.zip

你好 更新2.3版本的CLOVER引导WIN10的时候卡住，然后就重启了！不知道您有没有遇到

你可以给一个安装包么，我用你的引导文件，一直不能安装成功，版本是10.14，希望能得到你帮助

使用网上原版10.14.3系统+整合版CLOVER的dmg镜像，安装完成后可以正常进系统，替换大佬你的CLOVER以后（直接把你的CLOVER放入硬盘efi文件夹，添加CLOVER引导），开机CLOVER界面正常，选择Mac导引后开机进度走到一半就卡住了，求助！如果重新用U盘引导通用CLOVER可以进mac

PC: Miix 520
OS: Olarila Catalina 10.15.2 (APFS)
WLAN Card: Dell Wireless 1820A

I’ve changed my Intel’s card to a $8 DW1820A (bcm94350zae) and it works, I don’t think Miix 520 have WLAN card whitelist, I used BrcmPatchRAM2.kext but it doesn’t work on Catalina, so I downloaded BrcmPatchRAM3.kext from Acidanthera's BrcmPatchRAM and I followed configuration guide from Ameeno's DELL-DW1820A-Drivers to config PCI ID settings under Devices/Properties in Clover Configurator to make the card detected by Catalina.

After that,
WiFi, Bluetooth and AirDrop works fine.
But after using the computer for a while, the system goes freezing, the clock stops, but only cursor is still movable.

Please help me on this, and I wanna know if $50 bcm94352z works well on Catalina without having much configuration? If it works and not freezing, I might buy a new one. Thanks

樓主您好，想跟您請教一下
在我的這台miix-520當中，使用您的熱補丁會出現GLAN XDCI所造成的秒睡秒醒

想請問一下應該如何修復呢？ 謝謝～

您也有类似的情况吗?

经测试，最新版oc（7月8日编译）已经可以直接引导，不需要加booter-fileset-kernel和booter-fileset-basesystem了。

为什么我使用您的配置文件，卡在appleintelcontroller.cpp 就不动了

你好，我的显卡是HD620，i5 7200U，安装10.14.6之后，仪表盘拖动部件一直花屏，显卡通过自动识别安装，请问对于水波纹花屏有什么好的建议吗，谢谢

会卡在busy timeout AppleACPICPU

误删了原本引导OC文件夹里的所有文件，从您这边下载更新的OC以后引导启动看不到mac了。。您可以发一下您那边现在在用的OC文件夹里的文件吗。。。或者要怎么操作才能重新添加。。。。

0:101 0:000 === [ GetCPUProperties ] ==================================
0:101 0:000 CPU Vendor = 756E6547 Model=806EA
0:101 0:000 The CPU supported SSE4.1
0:101 0:000 BrandString = Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz
0:101 0:000 The CPU supported turbo
0:101 0:000 MSR 0x35 40008
0:101 0:000 TSC/CCC Information Leaf:
0:101 0:000 numerator : 150
0:101 0:000 denominator : 2
0:101 0:000 Calibrated ARTFrequency: 23974857
0:101 0:000 MSR 0xE2 before patch 1E008008
0:101 0:000 MSR 0xE2 is locked, PM patches will be turned on
0:101 0:000 MSR 0xCE 0004043D_F1011200
0:101 0:000 corrected FLEX_RATIO = 0
0:101 0:000 MSR 0x1B0 00000000
0:101 0:000 FSBFrequency = 23 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz
0:101 0:000 MaxDiv/MinDiv: 18.0/4
0:101 0:000 Turbo: 34/34/34/34
0:101 0:000 Features: 0xBFEBFBFF
0:101 0:000 Threads: 8
0:101 0:000 Cores: 4
0:101 0:000 FSB: 100 MHz
0:101 0:000 CPU: 400 MHz
0:101 0:000 TSC: 400 MHz
0:101 0:000 PIS: 100 MHz
0:101 0:000 ExternalClock: 25 MHz
0:101 0:000 === [ GetDevices ] ========================================
0:101 0:000 PCI (00|00:00.00) : 8086 5914 class=060000
0:101 0:000 PCI (00|00:02.00) : 8086 5917 class=030000
0:101 0:000 - GFX: Model=Intel UHD Graphics 620 (Intel)
0:101 0:000 PCI (00|00:04.00) : 8086 1903 class=118000
0:101 0:000 PCI (00|00:05.00) : 8086 1919 class=048000
0:101 0:000 PCI (00|00:13.00) : 8086 9D35 class=000000
0:101 0:000 PCI (00|00:14.00) : 8086 9D2F class=0C0330
0:101 0:000 PCI (00|00:14.02) : 8086 9D31 class=118000
0:102 0:000 PCI (00|00:14.03) : 8086 9D32 class=048000
0:102 0:000 PCI (00|00:15.00) : 8086 9D60 class=118000
0:102 0:000 PCI (00|00:15.01) : 8086 9D61 class=118000
0:102 0:000 PCI (00|00:15.02) : 8086 9D62 class=118000
0:102 0:000 PCI (00|00:15.03) : 8086 9D63 class=118000
0:102 0:000 PCI (00|00:16.00) : 8086 9D3A class=078000
0:102 0:000 PCI (00|00:17.00) : 8086 9D03 class=010601
0:102 0:000 PCI (00|00:1C.00) : 8086 9D13 class=060400
0:102 0:000 PCI (00|01:00.00) : 168C 0042 class=028000
0:102 0:000 - WIFI: Vendor=Atheros
0:102 0:000 PCI (00|00:1C.05) : 8086 9D15 class=060400
0:102 0:000 PCI (00|02:00.00) : FFFF FFFF class=FFFFFF
0:102 0:000 PCI (00|00:1D.00) : 8086 9D18 class=060400
0:102 0:000 PCI (00|07:00.00) : 144D A804 class=010802
0:102 0:000 PCI (00|00:1E.00) : 8086 9D27 class=118000
0:102 0:000 PCI (00|00:1E.03) : 8086 9D2A class=118000
0:102 0:000 PCI (00|00:1F.00) : 8086 9D4E class=060100
0:102 0:000 PCI (00|00:1F.02) : 8086 9D21 class=058000
0:102 0:000 PCI (00|00:1F.03) : 8086 9D71 class=040300
0:102 0:000 PCI (00|00:1F.04) : 8086 9D23 class=0C0500
0:102 0:000 === [ GetDefaultSettings ] ================================
0:102 0:000 Clover load options size = 0 bytes
0:124 0:021 EFI\CLOVER\config.plist loaded: Success
0:124 0:000 === [ GetListOfThemes ] ===================================
0:125 0:000 - [00]: iclover
0:125 0:000 - [01]: Simple
0:126 0:000 - [02]: SimpleThemeDark
0:127 0:001 === [ Found config plists ] ===============================
0:128 0:000 - config.plist
0:128 0:000 === [ GetEarlyUserSettings ] ==============================
0:128 0:000 timeout set to 0
0:128 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:128 0:000 FakeCPUID: 406E3
0:128 0:000 KextsToPatch: 7 requested
0:128 0:000 - [00]: IOGraphicsFamily (10.12+-第二阶段花屏补丁) :: MatchOS: 10.12.x :: BinPatch :: data len: 5
0:128 0:000 - patch disabled at config
0:128 0:000 - [01]: com.apple.driver.IOGraphicsFamily (10.14+-第二阶段花屏补丁) :: BinPatch :: data len: 5
0:128 0:000 - [02]: AppleAHCIPort (External icons patch) :: BinPatch :: data len: 8
0:128 0:000 - [03]: AppleUSBXHCIPCI (Change 15 port limit to 24 in XHCI kext 10.13) :: BinPatch :: data len: 4
0:128 0:000 - [04]: IOAHCIBlockStorage (#2 Enable TRIM for non-Apple SSDs, RehabMan) :: BinPatch :: data len: 11
0:128 0:000 - [05]: com.apple.driver.AppleIntelLpssI2C (Prevent Apple I2C kexts from attaching to I2C controllers, credit CoolStar) :: PlistPatch :: data len: 5
0:128 0:000 - [06]: com.apple.driver.AppleIntelLpssI2CController (Prevent Apple I2C kexts from attaching to I2C controllers, credit CoolStar) :: PlistPatch :: data len: 5
0:128 0:000 KernelToPatch: 3 requested
0:128 0:000 - [00]: Disable panic kext logging on 10.13 debug kernel (credit vit9696) :: MatchOS: 10.13.x :: data len: 6
0:128 0:000 - [01]: Disable panic kext logging on 10.13 release kernel (credit vit9696) :: MatchOS: 10.13.x :: data len: 6
0:128 0:000 - [02]: Disable panic kext logging on 10.14 release kernel (credit vit9696) :: MatchOS: 10.14.x :: data len: 6
0:128 0:000 Default theme: Simple
0:129 0:000 Custom entry boot CUSTOM_BOOT_THEME (0x0)
0:129 0:000 === [ LoadDrivers ] =======================================
0:130 0:000 Loading HFSPlus.efi status=Success
0:135 0:004 - driver needs connecting
0:135 0:000 Loading DataHubDxe-64.efi status=Success
0:139 0:003 Loading VirtualSmc.efi status=Success
0:143 0:004 Loading FSInject-64.efi status=Success
0:148 0:004 Loading ApfsDriverLoader-64.efi status=Success
0:152 0:003 - driver needs connecting
0:152 0:000 Loading AptioMemoryFix-64.efi status=Success
0:157 0:004 Loading NTFS-64.efi status=Success
0:165 0:008 - driver needs connecting
0:165 0:000 Loading AudioDxe-64.efi status=Success
0:170 0:005 - driver needs connecting
0:170 0:000 4 drivers needs connecting ...
0:171 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
0:171 0:000 HFS+ driver loaded
0:171 0:000 APFS driver loaded
0:171 0:000 Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
6:420 6:249 === [ InitScreen ] ========================================
6:420 0:000 Console modes reported: 8, available modes:
6:420 0:000 - [01]: 80x25
6:420 0:000 - [02]: 80x50
6:420 0:000 - [03]: 80x25
6:420 0:000 - [04]: 240x63 (current mode)
6:420 0:000 - [05]: 100x31
6:420 0:000 - [06]: 128x40
6:420 0:000 - [07]: 160x53
6:420 0:000 - [08]: 200x63
6:420 0:000 SetScreenResolution: 1920x1200 - already set
6:421 0:000 SetScreenResolution: 1920x1200 - already set
6:421 0:000 reinit: self device path=PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(1,GPT,83857A1F-6EB9-49C9-983F-C61E6DAB56F1,0x800,0x82000)
6:421 0:000 === [ GetMacAddress ] =====================================
6:421 0:000 === [ ScanSPD ] ===========================================
6:422 0:000 Scanning SMBus [8086:9D23], mmio: 0xA374C004, ioport: 0x4040, hostc: 0x11
6:433 0:010 === [ GetAcpiTablesList ] =================================
6:433 0:000 Get Acpi Tables List from RSDT:
6:433 0:000 - [00]: FACP CB-01 len=268
6:433 0:000 - [01]: UEFI CB-01 len=566
6:433 0:000 - [02]: UEFI CB-01 len=66
6:433 0:000 - [03]: SSDT CB-01 len=3442
6:433 0:000 - [04]: MSDM CB-01 len=85
6:433 0:000 - [05]: SSDT CB-01 len=1219
6:433 0:000 - [06]: SSDT CB-01 len=70
6:433 0:000 - [07]: TPM2 CB-01 len=52
6:433 0:000 - [08]: SSDT CB-01 len=12560
6:433 0:000 - [09]: SSDT CB-01 len=16210
6:433 0:000 - [10]: SSDT CB-01 len=2510
6:433 0:000 - [11]: ASF! CB-01 len=165
6:433 0:000 - [12]: ASPT CB-01 len=52
6:433 0:000 - [13]: BOOT CB-01 len=40
6:433 0:000 - [14]: DBGP CB-01 len=52
6:433 0:000 - [15]: HPET CB-01 len=56
6:433 0:000 - [16]: APIC CB-01 len=300
6:433 0:000 - [17]: MCFG CB-01 len=60
6:433 0:000 - [18]: SSDT CB-01 len=1303
6:433 0:000 - [19]: SSDT CB-01 len=4577
6:433 0:000 - [20]: LPIT CB-01 len=148
6:433 0:000 - [21]: WSMT CB-01 len=40
6:433 0:000 - [22]: SSDT CB-01 len=671
6:433 0:000 - [23]: SSDT CB-01 len=838
6:433 0:000 - [24]: SSDT CB-01 len=12290
6:433 0:000 - [25]: SSDT CB-01 len=1310
6:433 0:000 - [26]: DBGP CB-01 len=52
6:433 0:000 - [27]: DBG2 CB-01 len=84
6:433 0:000 - [28]: SSDT CB-01 len=4272
6:433 0:000 - [29]: SSDT CB-01 len=6062
6:433 0:000 - [30]: DMAR CB-01 len=384
6:433 0:000 - [31]: FPDT CB-01 len=68
6:433 0:000 - [32]: BGRT CB-01 len=56
6:433 0:000 Calibrated TSC Frequency = 1798114340 = 1798MHz
6:433 0:000 === [ GetUserSettings ] ===================================
6:434 0:000 Add 1 devices:
6:434 0:000 USB FixOwnership: yes
6:434 0:000 Dropping 2 tables:
6:434 0:000 - [00]: Drop table signature="DMAR" (52414D44)
6:434 0:000 - set table: 52414D44, 0 to drop: yes
6:434 0:000 - [01]: Drop table signature="MATS" (5354414D)
6:434 0:000 - set table: 5354414D, 0 to drop: no
6:434 0:000 - final DSDT Fix mask=0002000C
6:434 0:000 PatchesDSDT: 20 requested
6:434 0:000 - [00]: (change SAT0 to SATA) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:434 0:000 - [01]: (change HECI to IMEI) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:434 0:000 - [02]: (change GFX0 to IGPU) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:434 0:000 - [03]: (change Method(GPRW,2,N) to XPRW, pair with SSDT-GPRW.aml) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:434 0:000 - [04]: (change _OSI to XOSI, pair with SSDT-XOSI.aml) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:434 0:000 - [05]: (change _BIF to TBIF for battery status) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:434 0:000 - [06]: (change _BST to TBST for battery status) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:434 0:000 - [07]: (change GSBI to GSB0 for battery status) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:434 0:000 patch disabled at config
6:434 0:000 - [08]: (MAMR TO MAM00) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:434 0:000 patch disabled at config
6:434 0:000 - [09]: (MAMR TO MAM00) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:434 0:000 patch disabled at config
6:434 0:000 - [10]: (change HDAS to HDEF) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:434 0:000 - [11]: (change _DSM to XDSM) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:434 0:000 - [12]: (change Method(_PTS,1,N) to ZPTS, pair with SSDT-PTSWAK.aml) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:434 0:000 - [13]: (change Method(_PTS,1,S) to ZPTS, pair with SSDT-PTSWAK.aml) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:435 0:000 - [14]: (change Method(_WAK,1,N) to ZWAK, pair with SSDT-PTSWAK.aml) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:435 0:000 - [15]: (change Method(_WAK,1,S) to ZWAK, pair with SSDT-PTSWAK.aml) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:435 0:000 - [16]: (change EHC1 to EH01) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:435 0:000 - [17]: (change EHC2 to EH02) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:435 0:000 - [18]: (rename h_ec to ec) lenToFind: 4, lenToReplace: 4, Target Bridge:
6:435 0:000 - [19]: (change _LID to LIDX,pair with ssdt-bat0-lid) lenToFind: 5, lenToReplace: 5, Target Bridge:
6:435 0:000 PluginType: 1
6:435 0:000 Using ProductName from config: MacBookPro13,1
6:435 0:000 Using latest BiosVersion from clover
6:435 0:000 BiosVersion: MBP131.88Z.F000.B00.1902141510
6:435 0:000 BiosReleaseDate: 02/14/2019
6:435 0:000 Using EfiVersion from config: 228.0.0.0.0
6:435 0:000 Using FirmwareFeatures from config: 0xFC0FE137
6:435 0:000 Using FirmwareFeaturesMask from config: 0xFF1FFF3F
6:435 0:000 Board-ID set from config as Mac-473D31EABEB93F9B
6:435 0:000 BoardType: 0xA
6:435 0:000 ChassisType: 0x9
6:435 0:000 === [ GetEfiBootDeviceFromNvram ] =========================
6:436 0:000 - efi-boot-device-data: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,199945A990E01A3EAE372757CF0D0020)
6:436 0:000 - Volume: 'PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,199945A990E01A3EAE372757CF0D0020)'
6:436 0:000 - LoaderPath: ''
6:436 0:000 - Guid = 0FBDDB9F-2147-4425-93E5-1F60688458EB
6:437 0:000 === [ Found DSDT tables ] =================================
12:987 6:550 === [ ScanVolumes ] =======================================
12:987 0:000 Found 10 volumes with blockIO
12:987 0:000 - [00]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)
12:987 0:000 - [01]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(1,GPT,83857A1F-6EB9-49C9-983F-C61E6DAB56F1,0x800,0x82000)
12:988 0:000 Result of bootcode detection: bootable Windows (vista,win)
12:988 0:000 This is SelfVolume !!
12:988 0:000 - [02]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(2,GPT,CA94D3AE-5090-4844-8FF7-25731E68D6A3,0x82800,0x8000)
12:989 0:000 - [03]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(3,GPT,588C4507-BB37-415B-AEC7-C3004D1B53AF,0x8A800,0xC800000)
12:989 0:000 Result of bootcode detection: bootable Windows (vista,win)
12:989 0:000 - [04]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(4,GPT,756BDD18-C97C-4208-9B65-CD761A0638CF,0xC88A800,0xAE74800)
12:990 0:000 Result of bootcode detection: bootable Windows (vista,win)
12:990 0:000 - [05]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)
12:991 0:000 Result of bootcode detection: bootable unknown (legacy)
12:991 0:000 - [06]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,32845D5773CD504B8145A6426BC72DBB)
12:991 0:000 - [07]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,199945A990E01A3EAE372757CF0D0020)
12:992 0:000 - [08]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D84C893CE0DA4B4C859062EE74706ABF)
12:992 0:000 - [09]: Volume: PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,895D1462E6D90F45AC0ADC74C4EFF00C)
12:994 0:001 found 2 handles with audio
12:994 0:000 got index=0
12:994 0:000 got volume 70
12:994 0:000 === [ InitTheme ] =========================================
12:994 0:000 use daylight theme
13:060 0:066 Using theme 'Simple' (EFI\CLOVER\themes\Simple)
13:060 0:000 OS main and drive as badge
13:069 0:008 file sound read: sound.wav Not Found
13:076 0:006 Loading font from ThemeDir: Success
13:078 0:001 theme inited
13:078 0:000 Chosen theme Simple
13:078 0:000 found boot-args in NVRAM:, size=1
13:078 0:000 after NVRAM boot-args=darkwake=0 abm_firstpolldelay=16000 -lilubetaall kext-dev-mode=1 -no_compat_check lilucpu=8
13:078 0:000 === [ Dump SMC keys from NVRAM ] ==========================
13:078 0:000 found AppleSMC protocol
13:099 0:020 === [ AddCustomEntries ] ==================================
13:099 0:000 Custom entry 0 Title:"Windows" Path:"\EFI\Microsoft\Boot\bootmgfw.efi" Options:"-s -h" Type:7 Flags:0x0 matching Volume:"83857A1F-6EB9-49C9-983F-C61E6DAB56F1"
13:099 0:000 Checking volume "SYSTEM_DRV" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(1,GPT,83857A1F-6EB9-49C9-983F-C61E6DAB56F1,0x800,0x82000)) ... match!
13:104 0:005 Custom settings: .plist will be applied
13:105 0:000 Checking volume "Windows" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(3,GPT,588C4507-BB37-415B-AEC7-C3004D1B53AF,0x8A800,0xC800000)) ... skipped
13:105 0:000 Checking volume "LENOVO" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(4,GPT,756BDD18-C97C-4208-9B65-CD761A0638CF,0xC88A800,0xAE74800)) ... skipped
13:105 0:000 Checking volume "Preboot" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,32845D5773CD504B8145A6426BC72DBB)) ... skipped
13:105 0:000 Checking volume "MacOS" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,199945A990E01A3EAE372757CF0D0020)) ... skipped
13:105 0:000 Checking volume "Recovery" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D84C893CE0DA4B4C859062EE74706ABF)) ... skipped
13:105 0:000 Checking volume "VM" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,895D1462E6D90F45AC0ADC74C4EFF00C)) ... skipped
13:105 0:000 Custom entry 1 Title:"MacOS" Path:"\System\Library\CoreServices\boot.efi" Type:1 Flags:0x2 matching Volume:"0FBDDB9F-2147-4425-93E5-1F60688458EB"
13:105 0:000 Checking volume "SYSTEM_DRV" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(1,GPT,83857A1F-6EB9-49C9-983F-C61E6DAB56F1,0x800,0x82000)) ... skipped
13:105 0:000 Checking volume "Windows" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(3,GPT,588C4507-BB37-415B-AEC7-C3004D1B53AF,0x8A800,0xC800000)) ... skipped
13:105 0:000 Checking volume "LENOVO" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(4,GPT,756BDD18-C97C-4208-9B65-CD761A0638CF,0xC88A800,0xAE74800)) ... skipped
13:105 0:000 Checking volume "Preboot" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,32845D5773CD504B8145A6426BC72DBB)) ... skipped because path does not exist
13:106 0:000 Checking volume "MacOS" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,199945A990E01A3EAE372757CF0D0020)) ... match!
13:134 0:028 hibernated: set as never
13:136 0:002 [!] Icon 18 (icons\vol_internal_apfs.icns) not found (path: EFI\CLOVER\themes\Simple)
13:138 0:001 Custom settings: .plist will be applied
13:143 0:004 Checking volume "Recovery" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,D84C893CE0DA4B4C859062EE74706ABF)) ... skipped because path does not exist
13:143 0:000 Checking volume "VM" (PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,895D1462E6D90F45AC0ADC74C4EFF00C)) ... skipped because path does not exist
13:143 0:000 === [ ScanLoader ] ========================================
13:143 0:000 - [01]: 'SYSTEM_DRV'
13:145 0:001 AddLoaderEntry for Volume Name=SYSTEM_DRV
13:145 0:000 skipped because path PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(1,GPT,83857A1F-6EB9-49C9-983F-C61E6DAB56F1,0x800,0x82000)\EFI\microsoft\Boot\bootmgfw.efii already exists for another entry!
13:197 0:052 AddLoaderEntry for Volume Name=SYSTEM_DRV
13:197 0:000 skipped because entry is hidden
13:197 0:000 - [03]: 'Windows'
13:258 0:060 - [04]: 'LENOVO'
13:319 0:060 - [06]: 'Preboot'
13:321 0:002 AddLoaderEntry for Volume Name=Preboot
13:326 0:004 hibernated: set as never
13:331 0:005 AddLoaderEntry for Volume Name=Preboot
13:393 0:061 - [07]: 'MacOS'
13:401 0:008 AddLoaderEntry for Volume Name=MacOS
13:401 0:000 skipped because path PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,199945A990E01A3EAE372757CF0D0020)\System\Library\CoreServices\boot.efii already exists for another entry!
13:453 0:051 - [08]: 'Recovery'
13:455 0:001 AddLoaderEntry for Volume Name=Recovery
13:515 0:060 - [09]: 'VM'
13:566 0:050 Scanning legacy ...
13:566 0:000 1: 'SYSTEM_DRV' (vista,win) add legacy
13:568 0:002 added 'Boot Windows from SYSTEM_DRV' OSType=2 Icon=vista,win
13:568 0:000 3: 'Windows' (vista,win) add legacy
13:570 0:002 added 'Boot Windows from Windows' OSType=2 Icon=vista,win
13:570 0:000 4: 'LENOVO' (vista,win) add legacy
13:572 0:002 added 'Boot Windows from LENOVO' OSType=2 Icon=vista,win
13:572 0:000 === [ AddCustomTool ] =====================================
13:574 0:001 found tool \EFI\CLOVER\tools\Shell64U.efi
13:574 0:000 Checking EFI partition Volume 1 for Clover
13:574 0:000 Found Clover
13:579 0:005 === [ GetEfiBootDeviceFromNvram ] =========================
13:579 0:000 === [ FindStartupDiskVolume ] =============================
13:579 0:000 - Volume: partition = PciRoot(0x0)\Pci(0x1D,0x0)\Pci(0x0,0x0)\NVMe(0x1,A5-50-B9-81-B4-38-25-00)\HD(5,GPT,0FBDDB9F-2147-4425-93E5-1F60688458EB,0x176FF000,0x65F4288)\VenMedia(BE74FCF7-0B7C-49F3-9147-01F4042E6842,199945A990E01A3EAE372757CF0D0020)
13:579 0:000 - searching for that partition
13:579 0:000 - found entry 1. 'Boot MacOS from MacOS', Volume 'MacOS'
13:579 0:000 Boot redirected to Entry 1. 'Boot MacOS from MacOS'
13:579 0:000 DefaultIndex=1 and MainMenu.EntryCount=14
13:579 0:000 === [ StartLoader ] =======================================

最新的bios版本6ncn39ww，用着有点问题。不适配的话我就退回35ww了。
另外，显示器好像不支持调节dpi大小？闪屏问题也存在，这个我需要怎么调节设置？

I keep getting this message when I try to boot the installer.

Has anyone seen this?

如何实现两个引导的切换，是直接通过EFI引导选项更改吗？

在测试的时候，发现并不能实现多指手势识别，而只有点击能够实现。

用的是原版10.15.4镜像，不注入edid时闪屏非常严重，使用hidpi的脚本后倒是好多了，但是看一些黑色界面还是能看到频闪。这个是由于取消了仿冒显卡么？（另外，使用你的opencore引导niresh的安装映像在安装程序ramdisk上则没有这个问题，但那个映像安装上之后卡在“还剩一分钟”，没法正常用。）

这边按照教程https://blog.csdn.net/weixin_41413372/article/details/106749126做好启动盘，原装的MIIX520能够进入到安装界面，但是由于网卡不行，无法联网导致无法安装；淘宝上买了DW1820A，更换上以后，发现存在卡进度条的问题；进度条会先快速读到一半，然后回退卡死，CPU风扇狂转。我想看日志，但是发觉Debug是0x100，target不为0，好像配置都没毛病。不知道该怎么办中。。。。。

不知道是不是我這個機子的問題，從usb type A
和usb type c dock，線接上ipad都會顯示未充電；iphone就是正常的
不知道有沒有人碰到相同的問題